Journal Menu
Editors Overview
jopc maintains an Editorial Board of practicing researchers from around the world, to ensure manuscripts are handled by editors who are experts in the field of study.Publications
(2522)
Special Issue Open Access Original Research Published on :- 13-Nov-2023
Revealing the Effect of Swift Carbon Ion Beam on Radiation Sensitivity of Radio-frequency Magnetron Sputtered Grown Alumina Thin Films
By
Aloke Kanjilal,
Abstract : Regarding targeted treatment, hadron therapy is beneficial than conventional radiotherapy based on X rays/gamma rays due to characteristic energy loss read more
[This section belongs to Journal of Polymer and Composites (jopc)]
Special Issue Open Access Original Research Published on :- 13-Nov-2023
Evaluation of Patient-Specific Quality Assurance for RapidArc Treatment Delivery Using Dose Volume Histogram
By
Sumanta Manna,
Abstract : This study aims to evaluate the application of dose volume histogram (DVH) metrics within the patient-specific quality assurance (PSQA) protocol in read more
[This section belongs to Journal of Polymer and Composites (jopc)]
Special Issue Open Access Original Research Published on :- 13-Nov-2023
Breakup Fusion of 18O with 144Sm
By
Rajesh K. Sahoo1, Dharmendra Singh, Amritraj Mahato1, Nitin Sharma, Jagatjyoti Mohapatra, Lupteindu Chhura, Rahul Mahato, Pankaj K. Giri, Sneha B. Linda, Harish Kumar, Suhail A. Tali, Asif Ali, Rahbar Ali, S. Kumar, Nabendu K. Deb, N.P.M. Sathik8, M. Afzal Ansari, R. Kumar, S. Muralithar, R.P. Singh,
Abstract : Excitation function measurements have been done for the evaporation residues populating in the system 18O+144Sm. For this purpose, the stacked foil read more
[This section belongs to Journal of Polymer and Composites (jopc)]
Special Issue Open Access Original Research Published on :- 13-Nov-2023
Kaniadakis Holographic Dark Energy by Using Hybrid Scale Factor
By
Benoy Kumar Singh,
Abstract : We carry out the work on Kaniadakis holographic dark energy KHDE with hybrid expansion law by taking the scale factor containing both exponent and read more
[This section belongs to Journal of Polymer and Composites (jopc)]
Special Issue Open Access Original Research Published on :- 13-Nov-2023
Dispersion Analysis of TE Modes in 1D Magnetized Ferrite Photonic Crystals for Tunable and Switchable Band Gap Filtering Device Applications under Transverse Magnetization Configuration
By
Dr. Yogesh Sharma,
Abstract : The article comprehensively explores the dispersion characteristics exhibited by TE modes within one-dimensional magnetized ferrite photonic crystals, read more
[This section belongs to Journal of Polymer and Composites (jopc)]
Special Issue Open Access Original Research Published on :- 13-Nov-2023
Fabrication and Characterization of Zinc-based Alloy for Bio-implants
By
Toshit Jain,
Abstract : Zinc-based alloys are potential biodegradable implants and can replace Magnesium and Titaniumbased materials via engineering their biomechanical read more
[This section belongs to Journal of Polymer and Composites (jopc)]
Special Issue Open Access Original Research Published on :- 13-Nov-2023
A Comparative Study of Zinc Oxide Nano Particles Synthesized by Hydrothermal, Sol-gel and Thermal Decomposition
By
Nudrat Jahan,
Abstract : In the proposed work, Zinc oxide nano particles (ZnO NP’s) are synthesized using three different methods: Hydrothermal, Sol-gel and Thermal read more
[This section belongs to Journal of Polymer and Composites (jopc)]
International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)
Conference Open Access Original Research Published on :- 14-Nov-2023
Corrosion Characterisation of Low Alloy CrMoV Steel Before and After Cryogenic Heat Therapy
By
S SARVESWARA REDDY,
Abstract : Low alloy CrMoV steel is used in Turbine wheels, Distance pieces, Compressor aft shafts etc of Gas Turbines. Cryogenic heat treatment was used to read more
[This section belongs to Journal of Polymer and Composites (jopc)]
International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)
Conference Open Access Original Research Published on :- 14-Nov-2023
Numerical Analysis and Comparison of Various Cross Sections of Heat Pipes in Heat Exchanger
By
GADIPELLY BHASKAR,
Abstract : The present work describes about numerical analysis of heat pipe with different cross sections such as L-shape, U-shape, wave and spring read more
[This section belongs to Journal of Polymer and Composites (jopc)]
International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)
Conference Open Access Original Research Published on :- 14-Nov-2023
Liquid-Cooled Battery Thermal Management System: A Numerical Investigation of Effect of Coolant Path and Flow Rate Optimization
By
Giphin George,
Abstract : Battery thermal management system (BTMS) is crucial for ensuring the safety and performance of battery packs in electric vehicles. Liquid cooling is read more
[This section belongs to Journal of Polymer and Composites (jopc)]
International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)
Conference Open Access Original Research Published on :- 14-Nov-2023
Numerical Analysis of Battery Thermal Management Using Phase Change Material Concerning Melting Fraction and Temperature
By
Mr. Potluri sai Kiran,
Abstract : This work, analysis and simulates a phase change material melting for battery thermal management (BTM). Phase change materials (PCM) are the read more
[This section belongs to Journal of Polymer and Composites (jopc)]
International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)
Conference Open Access Review Article Published on :- 14-Nov-2023
Review of Post-consumer Plastics and Pyrolysis Technology
By
Bhargav Angadala, Karimulla Syed, V.L. Mangesh, Murali G,
Abstract : In both industrial and residential products, synthetic polymers are widely used. Since synthetic polymers are made from fossil fuels, they cannot read more
[This section belongs to Journal of Polymer and Composites (jopc)]
International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)
Conference Open Access Original Research Published on :- 14-Nov-2023
Numerical Simulation of Transient Free Convection in a Rectangular Cavity Filled with Porous Material Using Finite Element Formulations
By
Lokesh Kumar Sharma,
Abstract : In this study, the finite element method is used to quantitatively explore transient free convection in porous cavities in order to understand the read more
[This section belongs to Journal of Polymer and Composites (jopc)]
International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)
Conference Open Access Original Research Published on :- 14-Nov-2023
Topology Optimization of Press Tools for Additive Manufacturing: Reducing Manufacturing Time
By
Vaibhav Kanojia,
Abstract : This research paper presents a topology optimization study of a press tool consisting of a punch and a die, with the aim of optimizing the press tool read more
[This section belongs to Journal of Polymer and Composites (jopc)]
International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)
Conference Open Access Original Research Published on :- 14-Nov-2023
Prediction and Comparative Analysis of Thermal Conductivity of Jatropha Oil-based Hybrid Nanofluid by Multivariable Regression and ANN
By
Amol J. Asalekar, D.V.A. Rama Sastry,
Abstract : In the present study, a multivariable regression (MR) and artificial neural network (ANN) method was used to predict the thermal conductivity of read more
[This section belongs to Journal of Polymer and Composites (jopc)]
International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)
Conference Open Access Original Research Published on :- 14-Nov-2023
Effect of Fillet Radius on Bending Stress in Helical Gear using FEA
By
Hardial Singh,
Abstract : A well-optimized change in root fillet radius could greatly benefit helical gear operation by providing a smoother transmission with less impact and read more
[This section belongs to Journal of Polymer and Composites (jopc)]
International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)
Conference Open Access Original Research Published on :- 14-Nov-2023
An Evaluation of Versatile CNC Machines for Tabletop Applications
By
Ashwini Kumar Baluguri, Srinivasa Rao Seeram,
Abstract : The tabletop CNC provides a comprehensive analysis of computer numerical control (CNC) machines tailored for tabletop use. In today’s rapidly evolving read more
[This section belongs to Journal of Polymer and Composites (jopc)]
International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)
Conference Open Access Original Research Published on :- 15-Nov-2023
Characterization and Fabrication of Hybrid Matrix Composites of AZ91E Metal with Distinct Reinforcements of Fly Ash and ZrO2
By
Surya Chandra Swamy Gari,
Abstract : The current work choose the characteristics of (Magnesium composite) AZ91E-ZrO2-Fly ash Hybrid Metal Matrix using the regular analytic system. The read more
[This section belongs to Journal of Polymer and Composites (jopc)]
International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)
Conference Open Access Original Research Published on :- 15-Nov-2023
Taguchi Design for Optimization of Reinforcement at Toe area of Carbon Fiber Foot Plate
By
CHANDRIKSA WAGLE,
Abstract : This paper uses the Taguchi method to design experiments to determine the effect of various factors, such as fiber orientation, fiber type, and number read more
[This section belongs to Journal of Polymer and Composites (jopc)]
International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)
Conference Open Access Original Research Published on :- 15-Nov-2023
Design and Development of Ankle Foot Orthosis for Foot Amputated Person by Using Carbon Fibre
By
Chaitanya Burande,
Abstract : Ankle and foot orthotics play a pivotal role in the rehabilitation of individuals who have suffered a stroke, aiding in the restoration of their gait read more
[This section belongs to Journal of Polymer and Composites (jopc)]