Article search

All Articles

Total Articles : 59

Ahead of Print  Open Access Original Research Published on :- 13-May-2024

Design and Reliability Analysis of Polymer Pervious Concrete Mix for Preparation of Paver Block

By  
Hemant Choudhary, Sarvesh P. S. Rajput,
AbstractPorous concrete is a specially designed kind of concrete featuring high water porosity, allowing water to readily move through the already present . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 13-May-2024

Stress based topology optimization of axial tubes under impact to improve energy absorption

By  
Prashant Manvi, Fareen Nizami, Anandtheertha M R, Srikanth H V,
AbstractThe present study is aimed at designing a stress constrained topology optimized tube to improve the specific energy absorption (SEA) and reduce the . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 13-May-2024

VIBRATION ANALYSIS OF WOVEN HYBRID CARBON-KEVLAR COMPOSITE LAMINATES

By  
G Ram Vishal, Subha S, Rahul B,
AbstractComposite materials have revolutionized the field of engineering and design, providing the ability to combine two or more materials with different . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 13-May-2024

A Study of The Performance of surface modified NACA 2416 Airfoils at various Angles of Attach at Re80000

By  
Abhishek T K, H V Srikanth, Ramvishal, Venugopal M M,
AbstractThis study delves into the aerodynamic effects and characteristics of surface-modified NACA 2416 airfoils, placing a greater emphasis on the . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 13-May-2024

Effect of Compressive Strength of Core and Precast Concrete on the Behavior of Column Retrofitted by Precast Segment and FRP Wrapping – A Finite Element Study

By  
Chandini G M, L. Manjunatha, H Sharada Bai,
AbstractIn the present investigation the effect of compressive strength of core and precast concrete on the behavior of columns retrofitted by attaching . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 07-May-2024

Properties and antimicrobial activity of bacterial nanocellulose composite incorporated with silver nanoparticles based on green synthesis

By  
Aiste Balciunaitiene, Jonas Viskelis, Viktorija Puzeryte, Pranas Viskelis, Urte Riaubte,
AbstractGreen silver nanoparticles (AgNPs) synthesized using medical plant extracts as capping and reducing agents demonstrate broad applicability in . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 07-May-2024

Computational investigation of the influence of process parameters of 3D printed PLA material

By  
Saurabh Pachauri, Naveen Kr. Gupta, Ankit Gupta,
AbstractThis study uses numerical simulation to examine the relationship between critical process parameters say, feed rate, layer height, and raster angle, . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 09-May-2024

Green synthesis of Ag-Fe2O3-CuO-PANI nanocomposite and its application as an Apple Vinegar sensor

By  
Madhura S. Walujkar, Pooja Moreb, Sharda R. Gadale, Shobha. A. Waghmode,
AbstractGreen synthesis of nanoparticles is inexpensive and environmentally safe, herein we report green approach for the synthesis of Ag, Fe2O3, CuO . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 08-May-2024

Detailed review on adsorption refrigeration system for different adsorbent/adsorbate working pair green composite materials – An environmental aspect

By  
Virang H Oza,
AbstractAdsorption refrigeration is one of the greatest encouraging system for the refrigeration applications due to use of low grade energy. Present study . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 08-May-2024

Integrated Analysis of Stress Patterns in Transparent Polycarbonate Specimens: A Comparative Study between Photoelasticity and FEA Simulation for Compact Circular Testing

By  
Om Prakash Sondhiya, Roopesh Tiwari,
AbstractPhotoelasticity stands as a robust experimental technique within the realms of mechanics and materials science, offering a means to visually assess . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 04-May-2024

Rheological behaviour analysis of prepared nano-cutting fluids from Al2O3 and TiO2

By  
Anurag Sharma, R. C. Singh, Ranganath M. Singari, S. L. Bhandarkar,
AbstractIn this research paper, an attempt has been made to characterize and analyse the rheological properties of two samples of nano-cutting fluids. . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 04-May-2024

Application of Artificial intelligence in Single Point Incremental Forming for Surface Roughness Prediction

By  
Ranjeet Prasad, Manish Oraon, ,
AbstractThe sheet metal forming industries always try to find an emerging trend to form sheet-metal in a cost-effective manner. In this regard, a forming . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 04-May-2024

Investigation of microstructure and mechanical properties of multi-pass friction stir processing on precipitation hardened aluminum alloy

By  
Vipin Sharma, Yogesh Dewang, Mohit Sharma, Yashpal Gupta,
AbstractIn the present study, multi-pass friction stir processing of aluminum AA2014-T651 alloy is per-formed with one and four passes. The multi-pass . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 04-May-2024

Service Life Enhancement: Exploring the Effects of Supplementary Cementitious Materials on RC Structures in Marine and Urban Contexts

By  
Dharma Raj Upadhyaya, Dr. B. Kameswara Rao, P. Sree Pavan,
AbstractReinforced concrete (RC) structures stand as the cornerstone of modern construction due to their cost-effectiveness and widespread availability. The . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 04-May-2024

Analysis of Sound Transmission Loss in Hybrid Mufflers for Automotive Applications

By  
Ravi Jatola, Amit Kumar Guptab,
AbstractAn exhaust system’s noise level can be reduced with the use of a muffler. There is general recognition that baffled exhaust mufflers reduce noise . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 24-Apr-2024

Axial Compression Behavior of Aluminum (Al), Glass/Epoxy (GFRP) and Hybrid Al-GFRP Crash-box: An Experimental and Digital Image Correlation Approach

By  
Varsha M.P., Mahesh, Prashant Rawat,
AbstractThe study aims to understand the axial compression characteristics and fracture of cylindrical Aluminum (Al), Glass/epoxy (GFRP) composite and Hybrid . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 24-Apr-2024

Experimental Investigation of Hardness of FSW Al 5083 Alloy for Naval and Marine Application

By  
Devarshi Kapil, Saurabh Pachauri, Manish Dixit, Ashish Swarnkar,
AbstractFriction stir welding (FSW) is a relatively novel method of solid-state joining. This connecting method is adaptable, environmentally benign, and . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 24-Apr-2024

Evaluation of microstructure properties and characterization of fracture locus of AA5083 through equal channel angular pressing techniques

By  
Nagendra Singh, Manoj Kumar Agrawal,
AbstractIn this investigation, a commercially available aluminium alloy called AA5083 was subjected to two passes of equal channel angular pressing utilising . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 24-Apr-2024

Deformation Behaviour of the Billet and Tooling Design on AA5083 through Equal Channel Angular Pressing With Effect of Back Pressure

By  
Nagendra Singh, Manoj Kumar Agrawal,
AbstractEqual channel angular pressing is an emerging method applied to subject materials to significant plastic strains while maintaining the original shape . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 22-Apr-2024

A Review of Recent Advancements in the Field of Friction Stir Welding of Dissimilar Joints Made of Aluminium and Magnesium

By  
P J Lokesh Kumar, S Shankaranarayanan, C Jayabalan, S D Sekar, K Sengottaiyan, R Suresh Kumar,
AbstractFriction stir welding (FSW) stands at the forefront of welding technology, offering a promising avenue for joining dissimilar metals like aluminum and . . .

[This section belongs to Journal of Polymer and Composites (jopc)]