All Articles STM Journals

All Articles

Total Articles : 2508

Open Access Article Published on :- 20-Feb-2023

Effect of Fly Ash on Compressive Strength of Mortar and Brick Aggregate Concrete

Abdur R. Kaoser, Khan M. Amanat, Munaz A. Noor,

Abstract : This research work presents the influence of fly ash on compressive strength of mortar and brick aggregate concrete. A lot of tests were done about . . .

[This section belongs to International Journal of Concrete Technology (ijct)]

Open Access Article Published on :- 31-Jan-2023

Transit Corridors Impact on Land Use Pattern of Adjacent Areas

Poorva,

Abstract : Transit corridor has a strong influence on spatial structure at local, regional, and global levels. In the recent times, increase in mobility and . . .

[This section belongs to International Journal of Town Planning and Management (ijtpm)]

Open Access Article Published on :- 27-Jan-2023

Report on Monitoring and Detection of Manhole Using IoT

Amrisha Shandilya, Vidhi Srivastava, Shreya Soni, Riya Verma, Sandeep Kumar Mishra,

Abstract : A smart city is the society’s future goal for safer and greener accommodations. When implementing a smart city, smart basement network is an important . . .

[This section belongs to International Journal of Analog Integrated Circuits (ijaic)]

Open Access Article Published on :- 27-Jan-2023

Mobile Cloud Computing–Implementation Problems and Solutions

Ajay Kaushik, Manish Mathuria,

Abstract : Mobile Cloud Computing (MCC) Has Been Introduced as A Potential Technology With Explosive Growth Developing mobile applications and cloud computing . . .

[This section belongs to Journal of Mobile Computing, Communications & Mobile Networks (jomccmn)]

Open Access Article Published on :- 22-Jan-2023

Comparison of Various Load Balancing Algorithms in Cloud Computing

Ayushi Bhargava, Manish Bhardwa,

Abstract : The components associated with distributed computing are customers, datacenter and appropriated server. One of the principal issuesin distributed . . .

[This section belongs to Recent Trends in Parallel Computing (rtpc)]

Open Access Article Published on :- 17-Jan-2023

Planning for Sewerage and Sanitation in Lucknow Municipal Area

Faizan Ahmad, Arundhatee Mishra,

Abstract : Simplified Sewerage and affordable, environmentally friendly, and sustainable sanitation are the significant aspects of any smart city. Providing . . .

[This section belongs to International Journal of Town Planning and Management (ijtpm)]

Open Access Article Published on :- 08-Jan-2023

Anti-molestation Device with Heart Rate Sensor

Prathamesh Jagtap, Vinit Mhapralkar, Abhishek Rajpurohit, Shrutika Khobragade,

Abstract : Over the last few years, the status of women in India has changed dramatically. Women, however, continue to face social problems and are frequently . . .

[This section belongs to Journal of Mobile Computing, Communications & Mobile Networks (jomccmn)]

Open Access Article Published on :- 17-Jan-2023

Performance Analysis of SVM and CNN Networks for Defect Detection in Solar Panel

Vishakha Yadav, Om Dev Singh, Shubham Singh, Shailender Gupta,

Abstract : Use of solar panel in generating electricity is increasing globally day by day to meet the increase in demand of power. Many developments have been . . .

[This section belongs to International Journal of Analog Integrated Circuits (ijaic)]

Open Access Article Published on :- 20-Jan-2023

Steepening Pit Walls: Geotechnical and Economic Implications

M. Affam, P. Newton,

Abstract : Current approach to pit-wall analysis tends to separate designs into distinct categories. The first consideration involves analysis of slope in which . . .

[This section belongs to International Journal of Geological and Geotechnical Engineering (ijgge)]

Open Access Article Published on :- 24-Jan-2023

Evaluation of the Resistance of Concrete by Partial Replacement of Coarse Aggregate with Steel Slag and Cement with Bentonite Powder

Uday N. Gawai, S.P. Nirkhe,

Abstract : According to the World Health Organization, concrete is the third most consumed material by humans after food and water. Concrete consists of cement, . . .

[This section belongs to International Journal of Concrete Technology (ijct)]

Open Access Article Published on :- 15-Jan-2023

A Study of Virtual Machines Environment in Cloud Computing

Nikita Lakhmera, Amit Kumar Gupta, Priya Mathur,

Abstract : The Cloud computing is most widely used technological concept which gives the efficient result in concern to availability and utilizing of resources, . . .

[This section belongs to Recent Trends in Parallel Computing (rtpc)]

Open Access Article Published on :- 20-Jan-2023

Evaluating and Optimizing Intersection Performance in Indian Context—A Case Study

Rohan Vardhan, Rahul Vardhan Bhatnagar,

Abstract : Traffic Jams in a network of intersections and roads is an omnipresent issue that is caused by several parameters. The Panchkula City of India based . . .

[This section belongs to International Journal of Transportation Engineering and Traffic System (ijtets)]

Open Access Article Published on :- 20-Jan-2023

Performance Comparison of Retinal Image Enhancement Techniques using Wavelet Transforms

Kilari Veera Swamy, Vineetha Kasula,

Abstract : Retinal picture getting ready is indispensable in the medical field. Retinal overseeing and picture update are crucial here. At the first stage, . . .

[This section belongs to International Journal of Analog Integrated Circuits (ijaic)]

Open Access Article Published on :- 17-Jan-2023

An Accurate Data Integrity in Edge Computing.

Rakesh C Bhavsar,

Abstract : Edge computing is the evolution and more-efficient form of Cloud computing and is the ability to process and store data faster, enabling for more . . .

[This section belongs to International Journal of Embedded Systems and Emerging Technologies (ijeset)]

Open Access Article Published on :- 19-Jan-2023

Surveillance Drone

Pranesh Dilip Tambe, Ameya Rajesh Pati, Kiran Dhaije, Ragini Sharma,

Abstract : In today’s society, surveillance is becoming increasingly important in order to maintain a place’s decorum and assure the safety and security of its . . .

[This section belongs to Recent Trends in Programming languages (rtpl)]

Open Access Article Published on :- 25-Jan-2023

Parametric Assessment of Prefabricated Buildings and Conventional Steel Bearings

Rushabh S. Thole, A.B. Vawhale,

Abstract : Prefabricated buildings are primarily prepared through the process of pre-planning and prefabrication. The advancement of the prefabricated building . . .

[This section belongs to International Journal of Structural Engineering and Analysis (ijsea)]

Open Access Article Published on :- 20-Mar-2023

Free Swelling Behaviour of Bentonite-Sand Mixtures in Presence of Pore Fluids of Different Dielectric Constants

Shafi Kamal Rahman, Binu Sharma, Asuri Sridharan,

Abstract : The free swelling behaviour of bentonite sand mixtures have been studied using different percentage of ethanol-water and methanol-water solutions. . . .

[This section belongs to International Journal of Geological and Geotechnical Engineering (ijgge)]

Open Access Article Published on :- 09-Jan-2023

Parallelization of Metaheuristics for the Optimization of Permuted Perceptron Problem

Anurag Yadav,

Abstract : Parallel computing has found a mainstream backing in graphics processing units (GPUs).These resources have enormous processing capacity, are energy . . .

[This section belongs to Journal of Operating Systems Development & Trends (joosdt)]

Open Access Article Published on :- 19-Jan-2023

Real Time Face Mask Detection with Deep Learning

Tanishque Shandilya, Sudha K, Apoorav, Nikhil Arya,

Abstract : The pandemic because of COVID-19 needs no introduction. An all-too-important and successful weapon against it has been the utilization of face masks. . . .

[This section belongs to International Journal of Analog Integrated Circuits (ijaic)]

Open Access Article Published on :- 24-Jan-2023

Impact of City Planning on Cultural Identity: A case study of Jaipur City

Megha Singh, Avitesh,

Abstract : The phenomenon of expressing as well as communicating cultural identity in architecture and design is evident in numerous parts of the world: this . . .

[This section belongs to International Journal of Town Planning and Management (ijtpm)]

Not A Member?

Join Us

Submit Manuscript

Submit Topics

Initiatives

Guidelines For

Legal Information

Disclaimer

Corporate Office

STM Journals,
An imprint of Consortium E-learning network Pvt. Ltd.

A-118, 1st Floor, Sector-63, Noida, U.P. India, Pin-201301

(Tel) (+91) 0120- 4781 200
(Mob) (+91) 9810078958, +919667725932

E-mail: [email protected]

WEBSITE DISCLAIMER

Last updated: 2022-06-15

The information provided by STM Journals (“Company”, “we”, “our”, “us”) on https://journals.stmjournals.com/ (the “Site”) is for general informational purposes only. All information on the Site is provided in good faith, however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on the Site.

UNDER NO CIRCUMSTANCE SHALL WE HAVE ANY LIABILITY TO YOU FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE OF THE SITE OR RELIANCE ON ANY INFORMATION PROVIDED ON THE SITE. YOUR USE OF THE SITE AND YOUR RELIANCE ON ANY INFORMATION ON THE SITE IS SOLELY AT YOUR OWN RISK.

EXTERNAL LINKS DISCLAIMER

The Site may contain (or you may be sent through the Site) links to other websites or content belonging to or originating from third parties or links to websites and features. Such external links are not investigated, monitored, or checked for accuracy, adequacy, validity, reliability, availability, or completeness by us.

WE DO NOT WARRANT, ENDORSE, GUARANTEE, OR ASSUME RESPONSIBILITY FOR THE ACCURACY OR RELIABILITY OF ANY INFORMATION OFFERED BY THIRD-PARTY WEBSITES LINKED THROUGH THE SITE OR ANY WEBSITE OR FEATURE LINKED IN ANY BANNER OR OTHER ADVERTISING. WE WILL NOT BE A PARTY TO OR IN ANY WAY BE RESPONSIBLE FOR MONITORING ANY TRANSACTION BETWEEN YOU AND THIRD-PARTY PROVIDERS OF PRODUCTS OR SERVICES.

PROFESSIONAL DISCLAIMER

The Site can not and does not contain medical advice. The information is provided for general informational and educational purposes only and is not a substitute for professional medical advice. Accordingly, before taking any actions based on such information, we encourage you to consult with the appropriate professionals. We do not provide any kind of medical advice.

Content published on https://journals.stmjournals.com/ is intended to be used and must be used for informational purposes only. It is very important to do your analysis before making any decision based on your circumstances. You should take independent medical advice from a professional or independently research and verify any information that you find on our Website and wish to rely upon.

THE USE OR RELIANCE OF ANY INFORMATION CONTAINED ON THIS SITE IS SOLELY AT YOUR OWN RISK.

AFFILIATES DISCLAIMER

The Site may contain links to affiliate websites, and we may receive an affiliate commission for any purchases or actions made by you on the affiliate websites using such links.

TESTIMONIALS DISCLAIMER

The Site may contain testimonials by users of our products and/or services. These testimonials reflect the real-life experiences and opinions of such users. However, the experiences are personal to those particular users, and may not necessarily be representative of all users of our products and/or services. We do not claim, and you should not assume that all users will have the same experiences.

YOUR RESULTS MAY VARY.

The testimonials on the Site are submitted in various forms such as text, audio, and/or video, and are reviewed by us before being posted. They appear on the Site verbatim as given by the users, except for the correction of grammar or typing errors. Some testimonials may have been shortened for the sake of brevity, where the full testimonial contained extraneous information not relevant to the general public.

The views and opinions contained in the testimonials belong solely to the individual user and do not reflect our views and opinions.

ERRORS AND OMISSIONS DISCLAIMER

While we have made every attempt to ensure that the information contained in this site has been obtained from reliable sources, STM Journals is not responsible for any errors or omissions or the results obtained from the use of this information. All information on this site is provided “as is”, with no guarantee of completeness, accuracy, timeliness, or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance, merchantability, and fitness for a particular purpose.

In no event will STM Journals, its related partnerships or corporations, or the partners, agents, or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information in this Site or for any consequential, special or similar damages, even if advised of the possibility of such damages.

GUEST CONTRIBUTORS DISCLAIMER

This Site may include content from guest contributors and any views or opinions expressed in such posts are personal and do not represent those of STM Journals or any of its staff or affiliates unless explicitly stated.

LOGOS AND TRADEMARKS DISCLAIMER

All logos and trademarks of third parties referenced on https://journals.stmjournals.com/ are the trademarks and logos of their respective owners. Any inclusion of such trademarks or logos does not imply or constitute any approval, endorsement, or sponsorship of STM Journals by such owners.

CONTACT US

Should you have any feedback, comments, requests for technical support, or other inquiries, please contact us by email: [email protected].