Article search

All Articles

Total Articles : 60

Ahead of Print  Open Access Original Research Published on :- 18-May-2024

Comparative Seismic Analysis of Multistorey Core in Core Structure Using Beam, Fluid

By  
Mahesh Kumar C L, Shreya K, Basavana Gowda S N,
AbstractThe main objective of this paper is to analyze and study the comparative analysis of multistorey core in core structure with beam, Fluid viscous . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 18-May-2024

Dynamic Analysis of Reinforced Tall Structural Systems Connected in Series

By  
Mahesh Kumar C L, Chandana C S, Basavana Gowda S N,
AbstractIn recent years, there has been a notable surge in the development of multi-tower connected structures. This architectural phenomenon encompasses the . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 17-May-2024

Parametric optimization of COF of fabricated AA6082/Si3N4/C/Al2O3 composite

By  
Dhananjay Kumar, Yashpal, Ratnesh Kumar Sharma,
AbstractIn the present experimental investigation AA6082/Si3N4/C/Al2O3 composite was successfully fabri-cated using stir casting technique combined with . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 17-May-2024

Microstructural and Mechanical responses of Al6061 alloy matrix composite reinforced with yttria particles

By  
Vishal Kumar, Satnam Singh,
AbstractThe increasing need for materials that can improve the overall performance of automotive and aerospace components has driven the development of . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 16-May-2024

Dynamic Performance Enhancement of Polymer Composites through Metaheuristic machinining optimization

By  
Jai Rajesh.P, V.Balambica, M.Achudhan,
AbstractThis work aims to provide an optimization of meta-heuristic algorithms in order to improve the dynamic behavior of composite materials utilized in . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 17-May-2024

Review paper on Design and Development of Miniature Moving Magnet Pulse Tube Cryocooler

By  
Jitendra G. Shinde, Dr. M. M. Khot,
AbstractDeveloping a miniature moving magnet pulse tube cryocooler to address the limitations in existing cryocooler technologies, especially in terms of . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 17-May-2024

Fabrication and Evaluation of Aluminum Hybrid Metal Matrix Composite via Powder Metallurgy Approach

By  
A.K. Sethi, A Nirala, Om Vikash, Prateek Kumar, Nitesh Pandey,
AbstractThe growing demand for lightweight materials in modern automotive industries has spurred the development of Aluminum-based metal matrix composites . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 16-May-2024

Parametric optimization and validation of novel 3D scanning approach for sustainable manufacturing of patient-specific orthodontic retainers

By  
Sumit Gahletia, Ramesh Kumar Garg,
AbstractThe purpose of the proposed study is to identify the ideal procedure parameters for 3D scanning a denture in order to produce customised orthodontic . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 16-May-2024

Influence of Different Fluxes on the Angular Distortion of A-TIG Welded 316L Steel Plates

By  
Hemant Rawat, Amit Verma, Abhishek Kumar, Sonu Yadav, Pradeep Khanna,
AbstractThe conventional Tungsten Inert Gas (TIG) welding process is an autogenous welding process primarily used to weld thin metal sheets in the food . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 16-May-2024

Rotational Speed Influence on Weld Temperature in Friction Stir Lap Joint of Aluminium Alloy 6061 Using Numerical Simulation

By  
Amit Yadav, Ajai Jain, Rajiv Verma,
AbstractThe weld quality assessment in friction stir welding depends on the choice of suitable weld parameters. Rotational speed is one such parameter. The . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 16-May-2024

Experimental investigation of humidification-dehumidification desalination system

By  
Amit Kumar, Abhishek Tiwari,
AbstractThe aim of present study is to investigate an H-DH desalination system experimentally. The system consists of a solar air heater, a humidifier, and a . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 14-May-2024

STRENGTH AND COMPRESSIBILITY BEHAVIOURS OF EXPANSIVE SOIL TREATED WITH COFFEE HUSK ASH AND XANTHAN GUM

By  
Nagaraju Palaparth, Shyam Chamberlin, Pawar Praveen,
AbstractThe strength of the sub-grade, the caliber of the subbase and base course, the surrounding conditions, and the characteries of the soil utilized are . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 15-May-2024

Investigation on the mechanical characteristics and productivity of GGBS based geopolymer mortars

By  
T Bhavani chowdary, AV Rao,
AbstractIt has been known for decades that geopolymer will significantly replace cement’s function in construction industry. Geopolymer has low creep and . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 15-May-2024

Experimental Investigation of Mechanical Properties of AR Glass Fibre Reinforced Self Compacting Concrete

By  
Govindarajan.S, Muthuramu.KL, Ravikishore.P, Vivek Anand.A,
AbstractThe plain cement concrete has brittle in nature and low tensile strength. Self-Compacting Concrete (SCC) is an efficient choice in construction . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 15-May-2024

Assessment of Chlorides In The Water Samples And Its Absorption By Thermosetting Polymer Phenol Formaldehyde Resin

By  
D.Sravani, Dr.P.V.S.Machiraju, K.Mrudula Devi, Dr.S.Arunakumari, V.S.Pravallika,
AbstractAssessing chloride levels in water samples is critical for monitoring water quality and ensuring environmental and public health protection. This . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 14-May-2024

Modelling of Large Elasto-plastic Deformations by EFGM

By  
Azher Jameel, G. A. Harmain, Mohammad Junaid Mir,
AbstractCurrent work reports modelling and simulation of geometric and material nonlinearities arising due large elasto-plastic displacements in structural . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 14-May-2024

Investigation of Microstructural and Tensile behaviour of stir-casted Al5052-based Composites with nano-reinforcements

By  
Saumy Agarwal, Satnam Singh,
AbstractAluminium-based composites have gained popularity in the aviation, automotive, and marine sectors as a result of their exceptional strength-to-weight . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 14-May-2024

Comparison of Index and Engineering properties of weak soils stabilized by Rubber Tyre Chips and Powder

By  
M. Ammaiappan1, K. Natarajan,
AbstractEngineered constructions on weak or soft ground soil carry inherent risks due to the instability of the foundation. Soft ground lacks the necessary . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 08-May-2024

Thermal analysis of sustainable composite material absorption refrigeration system for cold storage application

By  
Virang H Oza,
AbstractPresent study deals with thermal analysis of absorption refrigeration system (ARS) and generator-absorber heat exchanger (GAX) based absorption . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 13-May-2024

Investigation on Structural Behavior of RC Beam-Column Joints: State-of-the-art

By  
Mayank Kumar Thakur, P. Poluraju, Pawar Praveen,
AbstractBeam-column joints (BCJs) are critical structural elements in buildings, influencing overall structural performance and safety. This review paper . . .

[This section belongs to Journal of Polymer and Composites (jopc)]