Article search

All Articles

Total Articles : 2298

Regular Issue  Open Access Original Research Published on :- 24-Jan-2023

Unsaturated Polyester Resin and Rice Husk Composites

By  
Mili S. Shah, Manthan Panchal, Ravi B. Patel, D.K. Bhoi,
AbstractPlastic is a very useful and important part of human beings but it is quiet harmful to environment. The increasing demand for the eco-friendly . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

  Open Access Article Published on :- 24-Jan-2023

An Interventional Study to Assess the Effect of Back Care on Quality of Sleep among Geriatric People of Nadiad City

By  
Nickson Das, Sharma khushbu, Parmar Meet, Patel Devansh, Parera Ripal, Patel Janvi, Pathan Muskan, Muniya Nehal,
AbstractIntroduction- Sleep is a condition of body and mind that recurs for several hours every night in which the sympathetic and parasympathetic system is . . .

[This section belongs to International Journal of Geriatric Nursing (ijgn)]

  Open Access Original Research Published on :- 23-Jan-2023

Characterization of Fracture Toughness of As-Cast Si-Mo- Cr Ductile Cast Iron

By  
Nanak Ram, Vijay Gautam,
AbstractIn the present study, a Si-Mo-Cr ductile cast iron is developed by taking three different combinations, viz. Heat-1, Heat-2 and Heat-3 of the . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

  Open Access Original Research Published on :- 23-Jan-2023

Techno-economic Assessment of a Domestic Refrigerator with Aluminium-based Suction Line and Capillary Tube

By  
Anil Kumar, Ankit,
AbstractThe present work reports the experimental performance evaluation of aluminum suction line-based domestic refrigerators. Furthermore, it compared . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

  Open Access Original Research Published on :- 23-Jan-2023

Parametric Study of Fused Deposition Modelling Process During Fabrication of Acrylonitrile Butadiene Styrene (ABS) Based Injection Molding Die

By  
Shivam Singh, S.K.S. Yadav,
AbstractThe purpose of this study is to dictate an optimum process parameter during the fabrication of additively manufactured acrylonitrile butadiene styrene . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

  Open Access Original Research Published on :- 23-Jan-2023

Hybrid Supercapacitor Application for Future E-mobility

By  
Amit Pal, Manish Mishra, Amrish K. Panwar,
AbstractWith the rise in demand for automobiles, there is an increase in pollution levels and global warming since the past decade, there is a strong need for . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

  Open Access Review Article Published on :- 23-Jan-2023

A Fuzzy Integrated Web-based Quality Function Deployment Application:A Conceptual Analysis

By  
Ashish K. Sharma, Neha Purohit, Shruti Thakur,
AbstractThe ‘voice of customers’ drives the Quality Function Deployment (QFD) process, which is a customer-focusedproduct development method. . . .

[This section belongs to Journal of Web Engineering & Technology (jowet)]

  Open Access Original Research Published on :- 19-Jan-2023

Experimental Analysis of Cutting Forces Under Different Machining Parameters and Carbide Inserts During Turning of Hardened AISI 4340 Steel

By  
Ranjan Kumar, Sumanta Jungli, Somnath Das, Arijit Mukherjee, Soumya Ghosh,
AbstractTurning of hardened materials with an advanced coated carbide insert has numerous advantages over the grinding process, e.g., reduced process cost, . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

  Open Access Original Research Published on :- 19-Jan-2023

Experimental Analysis of Nano-carbon Doped Alumina for Industrial Applications

By  
Alok Singh, Savita Singh, Sudhir K Sharma,
AbstractThe use of nano-carbon metal matrix composites can provide a solution to the enduring issue of optimal material selection and optimization for getting . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

  Open Access Original Research Published on :- 19-Jan-2023

Empirical Relation to Predict Essential Oil Yield in Conventional Distillation System

By  
Anil Kumar, Ravi Kant,
AbstractPeppermint is medicinal herb, and its extracts (essential oils) are of great importance because they are used in pharmaceutical, food, and cosmetic . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

  Open Access Original Research Published on :- 19-Jan-2023

Effect of Initial Temperature and Diameter of Ethanol Droplet on Evaporation Dynamics in Convective Air Medium

By  
Numan Siddique Mazumder, Pradip Lingfa, Asis Giri,
AbstractEthanol is a suitable biofuel as it has fewer toxic emissions and higher-octane numbers. For spray combustion applications, the gas phase motion must . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

  Open Access Original Research Published on :- 19-Jan-2023

Numerical Studies on Deep Drawability of the Aluminium Alloy, AA6082 and Parameters Affecting It

By  
Srijan Bansal, Vijay Gautam, Ved Prakash,
AbstractDeep drawing is a metal forming operation used for manufacturing sheet-metal components for application in the automobile, aerospace, and packaging . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

  Open Access Original Research Published on :- 19-Jan-2023

Numerical Study and Comparison of Passive Mixing in Helical Micromixers

By  
Akash Sinha, M. Zunaid, Afzal Husain,
AbstractA passive mixing inside three micromixers has been studied with water as the mixing fluid. Since the mixing at the micro-level is governed by species . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

  Open Access Original Research Published on :- 19-Jan-2023

Studies on the Influence of Squeezed Stir Casting Parameters on the Strengthening Properties of AZ91Mg Alloy

By  
Kamal Kant Singh, Dharamvir Mangal,
AbstractIn this research, optimum squeeze stir casting parameters of AZ91 Mg alloy has been investigated by considering its strengthening properties. Melting . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

  Open Access Original Research Published on :- 19-Jan-2023

Analysis of Crashworthiness of a Saloon Car Fitted with CNG Cylinder

By  
Shivam, Sanskar Sogani, Sarthak Mishra, Tushar Tanvar, Vijay Gautam, Devendra Kumar,
AbstractThere is an increase in demand for compressed natural gas vehicles in India. Due to the high gasoline prices and lack of electric vehicle . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

  Open Access Article Published on :- 03-Jan-2023

Aloe vera: A Review on Its Medicinal Importance

By  
Gyanendra Kumar Gupta, Gagan Devi,
AbstractToday, one of the main causes of human infection is the antibiotic resistance of bacteria due to the use of antibiotics which causes the emergence and . . .

[This section belongs to Research & Reviews : Journal of Crop science and Technology (rrjocst)]

Regular Issue  Open Access Article Published on :- 27-Jan-2023

Molecular Characterization of Circulating Rota Viral Strain causing infantile diarrhoea in Tripura, North East India

By  
Ankurita Bhowmik, Apurba Sarkar, Saikat Majumder, Ayan Modak, Niladri Sekhar Das, Sanjib Kumar Debbarma, Harpreet Kaur, Tapan Majumdar,
AbstractIntroduction: North Eastern India is geographically distinct from rest of India and the trend of Rota viral diarrhoea among children below 5 years of . . .

[This section belongs to Research & Reviews: A Journal of Microbiology & Virology (rrjomv)]

Regular Issue  Open Access Article Published on :- 20-Jan-2023

Synergistic and Antagonistic Effects of Azo-Schiff Base with Some Antibiotics on Gram-Positive Bacterial Isolates

By  
Salimah Aboulqasim Al, Najat Ramadan Elzawi, Abdelhamid Mohamed Elyassiry,
AbstractAntibacterial resistance has brought an urgent need to find a solution to the problem of antibacterial resistance and increase the effectiveness of . . .

[This section belongs to Research & Reviews: A Journal of Microbiology & Virology (rrjomv)]

  Open Access Article Published on :- 19-Jan-2023

Antibiotic Resistance: Molecular Mechanisms of Resistance

By  
Sandip Zine, Parth Mehta, Ankita Rai, Sayli Sawant,
AbstractAntibiotics are called as ‘Wonder Drugs’, the miracles of modern sciences. They help combat bacteria and prevent their growth. But due to unmonitored . . .

[This section belongs to Research & Reviews: A Journal of Microbiology & Virology (rrjomv)]

  Open Access Article Published on :- 28-Jan-2023

Zero Energy Cool Chamber (ZECC): A Unique Low-cost Food Preservation System

By  
Shrabani Kumbhakar, Ina Mukherjee, Debasree Ghosh,
AbstractZero energy cool chamber (ZECC) is an environment friendly or eco-friendly and low-cost post-harvest technology which can be made up with locally . . .

[This section belongs to Research & Reviews : Journal of Agricultural Science and Technology (rrjoast)]