Article search

All Articles

Total Articles : 48

Ahead of Print  Open Access Original Research Published on :- 05-Jul-2024

Investigation on Dry Sliding Wear Behaviour of AlSi7Mg0.3/B4C/ZrO2 Hybrid Composites using Taguchi Method

By  
S. Venkat Prasat, N. Venkateshwaran, S. Sekar, A. Rajkumar, K. Duraivelu,
AbstractHybrid Aluminium/Boron carbide/Zirconium oxide (AlSi7Mg0.3/B4C/ZrO2) composites were fabricated utilizing stir casting technique by varying boron . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 06-Jul-2024

Fabrication and drilling characterization of Hemp & Grewia-Optiva hybrid composite and comparison with ANN model

By  
Ankit, Rishu Kesharwani, Satyavrat, Dungali Sreehari,
AbstractIn recent days the use of natural fibers has increased over synthetic fibers due to various advantages. The alkali treatment for these natural fibers . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 24-Jul-2024

UTILIZATION OF RECRON FIBERS FOR IMPROVING SUBGRADE STABILITY OF EXPANSIVE SOILS

By  
G. Anil Kumar, G. Prasanna Kumar, Krupasindhu Biswal,
AbstractThe major interest in the utilization of synthetic fibers is used as reinforcing material for developing reinforcing effect into the entire soil . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 24-Jul-2024

Testing of Efficiency of wind turbine blade naca2415 aerofoil type using recycled carpet waste polymer composite material

By  
Rakshapal Singh Rajawat, Rajneesh Kumar Singh,
AbstractIn 2020, over 50% of residential properties in the United States were outfitted with carpet flooring, boasting an average longevity ranging from 10 to . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 22-Jul-2024

Enhancing Cooling Efficiency in Dual Nozzle CO2-Based Vortex Tube Systems for Machining Titanium Alloys: Implications for Polymer and Composite Processing

By  
Banoth Srinu, P. Sai kiran, Khirod Mahapatro, P. Vamsi Krishna,
AbstractIn machining of Titanium alloys, the cutting temperature plays a vital role that directly influences the performance and it is required to maintain . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 08-Jul-2024

An experimental study on flexural behavior of RC beams of Alccofine based engineered concrete infusing steel fibres

By  
A. Muralidhar, Sunil Kumar Tengli,
AbstractThe innovations in concrete being engineered to the specific requirements have found a new dimension under sustainability. Alccofine is a sustainable . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 19-Jul-2024

Investigation of Mechanical Properties of Concrete Using Agriculturally Based Waste and Fibers as Additives

By  
Mahalingegowda H R, B K Narendra,
AbstractIn today’s world one of the most common man-made materials widely used as concrete. Around 1 ton of concrete is produced every year for an individual . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 16-Jul-2024

Innovative Synthesis Techniques and Comprehensive Mechanical Characterization of Biopolymer-Based Composites for Advanced Applications in Biochemistry and Materials Sciences

By  
Pramod Ambadas Karole, Bhushan Garade, Rajesh Kumar,
AbstractBiopolymer-based composites have gotten a lot of attention lately because they could be used in biology and materials science in interesting ways. The . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 16-Jul-2024

Improving Polymer Composite Properties through Reinforcement Learning guided Prototyping a Novel Approach for Material Engineering

By  
Ms. Bindiya Jain, Mr Jeetandra Singh, Dr. Udit Mamodiya,
AbstractInnovative approaches integrating reinforcement learning (RL) and machine learning (ML) into the fields of polymer composite prototyping and soft . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 18-Jul-2024

Advancements in Polymer-Based Sensors and Actuators for Structural Health Monitoring in Aerospace: A Comprehensive Review of Emerging Trends

By  
Dr. Mehak Jonjua,
AbstractStructural health monitoring (SHM) has emerged as a critical aspect of aerospace engineering, aiming to ensure the safety and reliability of aircraft . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 11-Jul-2024

Producer Gas Generation by Utilizing Paddy Straw as a Biomass Feedstock in an Open Core Downdraft Gasifier

By  
Mohit Sharma, Rajneesh Kaushal, Naveen Rana, Mohit Bhargva, N.K. Batra, Anukriti Sharma,
AbstractIn present day scenario, the burning of paddy straw seriously affects the environment in India. This paper research work is utilized to solve the . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 17-Jul-2024

Influence of Gd doping in structural, morphological and optical properties of ZnO nanostructures synthesised via Sol-gel processes

By  
Nudrat Jahan, Monika Goyal,
AbstractIn this study, nanocrystalline Zn1-xGdx (x=0.0 and 0.03) samples were synthesised via the Sol-gel combustion process. An array of analytical . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 12-Jul-2024

Fabrication, Numerical Simulation and Compact Modeling of Ph-BTBT-C10 Organic Thin Film Transistor

By  
Shubham Dadhich, Vivek Upadhyay, Garima Mathur,
AbstractFlexible and cost-effective electronics have been necessitated by the advent of organic thin-film transistors (OTFTs). This study aims to study the . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 15-Jul-2024

Properties of ZnO Thin Film deposited on Flexible Substrate using RF Sputtering

By  
Mahima Asthana, Dr. Shri Kant,
AbstractSemiconductor materials demand is increased in recent years, due to new emerging technologies. There is need to find the alternate for silicon in . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 09-Jul-2024

Plant Growth Promotion: Role of Nanoparticles and Soil Microorganisms

By  
Charu Sharma, Vijay Kumar, Sanjay Gupta, Akhilesh Kumar, Vivek Kumar,
AbstractCrops intended to support rapidly expanding populations often face numerous harsh environmental conditions. Despite the natural evolution of plants in . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 08-Jun-2024

Examining Connective Tissue Changes Across Various Grades of Oral Epithelial Dysplasia and Oral Squamous Cell Carcinoma: A Histochemical Polymeric Investigation

By  
Dr Fazilram P, Dr Uzma Belgaumi, Dr. Nupura Vibhute, Dr. Vidya Kadashetti, Dr. Wasim Kamate, Dr. Rashmi Gangavati,
AbstractOral epithelial dysplasia (OED) and oral squamous cell carcinoma (OSCC) represent a spectrum of potentially malignant disorders posing significant . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 08-Jul-2024

An experimental investigation of Prosopis Juliflora Biodiesel’s performance and emission characteristics

By  
M. Nagappan, J.M. Babu, K. Karthi, PV Elumalai,
AbstractFossil fuels are currently in crisis due to their higher cost, their increasing use, and their scarcity. In view of the large number of cars on the . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 08-Jul-2024

An experimental study on flexural behavior of RC beams of Alccofine-based engineered concrete infusing steel fibers

By  
A. Muralidhar, Sunil Kumar Tengli,
AbstractThe innovations in concrete being engineered to the specific requirements have found a new dimension under sustainability. Alccofine is a sustainable . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 06-Jul-2024

Comparative Buckling Load Analysis of Thin Functionally Graded Material Plates with Variable Distributions: Power Law vs. Sigmoidal vs. Exponential

By  
Ravi Pant, Vikas Kumar,
AbstractA comprehensive comparative analysis of buckling load behavior in thin Functionally Graded Material (FGM) plates with variable material distributions . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 09-Jul-2024

Experimental analysis of wind turbine blade (HAWT) with recycled carpet waste polymer composite material

By  
Rakshapal Singh Rajawat, Rajneesh Kumar Singh,
AbstractThe term “carpet” is often used interchangeably with “rug,” but there is a technical distinction. Rugs are generally smaller and can be easily moved, . . .

[This section belongs to Journal of Polymer and Composites (jopc)]