All Articles STM Journals

All Articles

Total Articles : 2292

Special Issue Open Access Original Research Published on :- 02-Sep-2023

Flexural Strength and Drilling Parameter of Natural Fiber Composites with Usage of Epoxy Resin

Ravindra Pratap Singh,

Abstract : An attempt that has been made to take use of the advantages offered by natural composite materials in light of the fast advancement of research and . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Special Issue Open Access Original Research Published on :- 02-Sep-2023

Analysis of Fibre Reinforced Beams

Vivek Mehrotra,

Abstract : There has been research into the flexural behaviour of composite beams with a variety of fibre layer depths, all of which were designed using the . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Special Issue Open Access Review Article Published on :- 02-Sep-2023

A Review of Properties of Geopolymer Concrete

Vivek Mehrotra,

Abstract : The growing need for concrete around the world has led to both more concrete being made and more of it being used. Carbon dioxide is released into the . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Special Issue Open Access Original Research Published on :- 02-Sep-2023

Mechanical Properties Investigation of Green Waste Composite Material

Viyat Varun Upadhyay,

Abstract : Widespread accessibility and abundance of natural fibres are driving forces behind renewed focus on eco-friendly solutions. Researchers have recently . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Regular Issue Subscription Original Research Published on :- 02-Sep-2023

Bioremediation of TPH in Petroleum HydrocarbonContaminated Clay Soil with an Emerging Nutrient (Solpawa SBR-X TM)

Achinike Okogbule Wonodi, R.N. Okparanma, M.J. Ayotamuno,

Abstract : This research focuses on the bioremediation of total petroleum hydrocarbons (TPH) in petroleum hydrocarbon contaminated clay soil with an emerging . . .

[This section belongs to International Journal of Pollution: Prevention & Control (ijppc)]

Special Issue Open Access Review Article Published on :- 31-Aug-2023

Nano-enhanced Bio-based Phase Change Materials: A Brief Review

Aman Sharma,

Abstract : The high latent temperatures and variable melting points of bio-based phase change materials make them ideal for thermal control. This covers heat . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Special Issue Open Access Original Research Published on :- 31-Aug-2023

Properties of Concrete with Reinforcement Eggshell Powder As Cement

Viyat Varun Upadhyay,

Abstract : Many people choose concrete because of its reputation for durability and dependability. Concrete is not only strong and consistent, but also energy . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Special Issue Open Access Original Research Published on :- 25-Aug-2023

A Parametric Approach for Decision Making of Low-carbon Building Envelope Design

Chitra Dhakar,

Abstract : Buildings are major contributors of total carbon emissions than all other categories globally. to reduce these emissions by some quantity must propose . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Conference Open Access Original Research Published on :- 25-Aug-2023

Structural, Electronic and Optical Properties of ZnO Material Using First Principle Calculation

Jaiveer Singh,

Abstract : Structural, electronic and optical properties have been determined by using first principle calculation for ZnO material. In present study, full . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Conference Open Access Original Research Published on :- 25-Aug-2023

Investigation of Electro-optical Characteristic and Structure Optimization of PMMA: Bepq2/BCP/Tpbi Blue Highly Efficient OLED Device

Renu Sharma,

Abstract : In this Investigation, the energy level structure of the Spiro-MeOTAD/PMMA: Bepq2/BCP/Tpbi/LiF OLED has been investigated to explain the method of . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Conference Open Access Original Research Published on :- 25-Aug-2023

Enhanced Thermal Stability and Thermophysical Properties of High Density Polyethylene Based Polymer Composite Synthesized Through Compression Moulding Route

Manoj Tripathi,

Abstract : Polymer composite materials attract researchers as polymers can be filled with different fillers to get desired properties. Thermophysical properties . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Regular Issue Open Access Original Research Published on :- 25-Aug-2023

A Study of Composite Concrete Using Palm Oil Fuel Ash (POFA) as a Partial Replacement for Cement in Self Compacting Concrete

Katneni Prasanthi,

Abstract : Due to its flexibility at young ages and its capacity to be moulded into any necessary structural form and shape, concrete is the most commonly used . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Regular Issue Subscription Review Article Published on :- 24-Aug-2023

Mobile Computing: Current Trends, Security Issues, and Future Directions

Sapandeep Kaur Dhillon, Harjit Kaur,

Abstract : Mobile computing is a rapidly emerging technology that is revolutionizing various sectors such as education, healthcare, tourism, transportation, . . .

[This section belongs to International Journal of Wireless Security and Networks (ijwsn)]

Regular Issue Subscription Review Article Published on :- 24-Aug-2023

NLP Revolution in Education Feedback Analysis: Trends and Challenges

Maina Changeriwal, Vidhik Sharma, Suhana Arif, Lalit Kumar, Madhur Bharadwaj,

Abstract : Artificial Intelligence (AI) is a rapidly growing area of study in many domains like research and business. Various subsets of AI, such as Machine . . .

[This section belongs to International Journal of Wireless Security and Networks (ijwsn)]

Regular Issue Subscription Review Article Published on :- 24-Aug-2023

IoT Based Smart Saline Bottle for Healthcare

Nivedita Gawade, Rucha Mahalkar, Sakshi More, Snehal Shinde,

Abstract : There is a vast development in the Healthcare sector with the enhancement of Technology. The fundamental principle in caring for hospitalized patients . . .

[This section belongs to International Journal of Wireless Security and Networks (ijwsn)]

Regular Issue Subscription Review Article Published on :- 24-Aug-2023

Effects of Cluster Computing on Big Data Analysis and Network Topology

Sanchi S. Achalkhamb, Krishna T. Madrewar,

Abstract : The rapid expansion of big data has posed substantial difficulties for conventional computing systems. As a result, cluster computing has grown to be . . .

[This section belongs to International Journal of Algorithms Design and Analysis Review (ijadar)]

Regular Issue Subscription Original Research Published on :- 24-Aug-2023

Card Fraud Detection Using Artificial Neural Network and Multilayer Perception Algorithm

Baku Agyo Raphael, Bisen Gambo Adashu, Andrew Ishaku Wreford,

Abstract : Fraud has posed a significant challenge for merchants, especially in the online business sector, over the course of many years. This is primarily due . . .

[This section belongs to International Journal of Algorithms Design and Analysis Review (ijadar)]

Subscription Review Article Published on :- 24-Aug-2023

Machine Learning Techniques for Predicting Industries Based on Region

Supriya Kapase, Chaitanya Bari, Chaitrali Bhambure, Pallavi Chopade, Padmini Kondhalkar,

Abstract : In recent years, there has been a growing interest and emphasis on agricultural land preparation and its implementation among researchers, primarily . . .

[This section belongs to International Journal of Algorithms Design and Analysis Review (ijadar)]

Regular Issue Subscription Review Article Published on :- 24-Aug-2023

Virtual Clothes Try-On

Prathmesh Joshi, Virat Desale, Ajay Jadhav, Sushil Pawar, Rupali Salunke Pawar,

Abstract : Virtual try-on of clothes is gaining popularity thanks to its commercial potential. It can be used for intelligent recommendation or online purchasing . . .

[This section belongs to International Journal of Algorithms Design and Analysis Review (ijadar)]

Regular Issue Subscription Review Article Published on :- 23-Aug-2023

Wireless Sensor Network Localization Based on Static Anchor Node

Siti Nur,

Abstract : Anchor-based localization is a crucial challenge in wireless sensor networks (WSNs), aiming to determine the positions of all sensors by leveraging a . . .

[This section belongs to International Journal of Wireless Security and Networks (ijwsn)]

Not A Member?

Join Us

Submit Manuscript

Submit Topics

Initiatives

Guidelines For

Legal Information

Disclaimer

Corporate Office

STM Journals,
An imprint of Consortium E-learning network Pvt. Ltd.

A-118, 1st Floor, Sector-63, Noida, U.P. India, Pin-201301

(Tel) (+91) 0120- 4781 200
(Mob) (+91) 9810078958, +919667725932

E-mail: [email protected]

WEBSITE DISCLAIMER

Last updated: 2022-06-15

The information provided by STM Journals (“Company”, “we”, “our”, “us”) on https://journals.stmjournals.com/ (the “Site”) is for general informational purposes only. All information on the Site is provided in good faith, however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on the Site.

UNDER NO CIRCUMSTANCE SHALL WE HAVE ANY LIABILITY TO YOU FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE OF THE SITE OR RELIANCE ON ANY INFORMATION PROVIDED ON THE SITE. YOUR USE OF THE SITE AND YOUR RELIANCE ON ANY INFORMATION ON THE SITE IS SOLELY AT YOUR OWN RISK.

EXTERNAL LINKS DISCLAIMER

The Site may contain (or you may be sent through the Site) links to other websites or content belonging to or originating from third parties or links to websites and features. Such external links are not investigated, monitored, or checked for accuracy, adequacy, validity, reliability, availability, or completeness by us.

WE DO NOT WARRANT, ENDORSE, GUARANTEE, OR ASSUME RESPONSIBILITY FOR THE ACCURACY OR RELIABILITY OF ANY INFORMATION OFFERED BY THIRD-PARTY WEBSITES LINKED THROUGH THE SITE OR ANY WEBSITE OR FEATURE LINKED IN ANY BANNER OR OTHER ADVERTISING. WE WILL NOT BE A PARTY TO OR IN ANY WAY BE RESPONSIBLE FOR MONITORING ANY TRANSACTION BETWEEN YOU AND THIRD-PARTY PROVIDERS OF PRODUCTS OR SERVICES.

PROFESSIONAL DISCLAIMER

The Site can not and does not contain medical advice. The information is provided for general informational and educational purposes only and is not a substitute for professional medical advice. Accordingly, before taking any actions based on such information, we encourage you to consult with the appropriate professionals. We do not provide any kind of medical advice.

Content published on https://journals.stmjournals.com/ is intended to be used and must be used for informational purposes only. It is very important to do your analysis before making any decision based on your circumstances. You should take independent medical advice from a professional or independently research and verify any information that you find on our Website and wish to rely upon.

THE USE OR RELIANCE OF ANY INFORMATION CONTAINED ON THIS SITE IS SOLELY AT YOUR OWN RISK.

AFFILIATES DISCLAIMER

The Site may contain links to affiliate websites, and we may receive an affiliate commission for any purchases or actions made by you on the affiliate websites using such links.

TESTIMONIALS DISCLAIMER

The Site may contain testimonials by users of our products and/or services. These testimonials reflect the real-life experiences and opinions of such users. However, the experiences are personal to those particular users, and may not necessarily be representative of all users of our products and/or services. We do not claim, and you should not assume that all users will have the same experiences.

YOUR RESULTS MAY VARY.

The testimonials on the Site are submitted in various forms such as text, audio, and/or video, and are reviewed by us before being posted. They appear on the Site verbatim as given by the users, except for the correction of grammar or typing errors. Some testimonials may have been shortened for the sake of brevity, where the full testimonial contained extraneous information not relevant to the general public.

The views and opinions contained in the testimonials belong solely to the individual user and do not reflect our views and opinions.

ERRORS AND OMISSIONS DISCLAIMER

While we have made every attempt to ensure that the information contained in this site has been obtained from reliable sources, STM Journals is not responsible for any errors or omissions or the results obtained from the use of this information. All information on this site is provided “as is”, with no guarantee of completeness, accuracy, timeliness, or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance, merchantability, and fitness for a particular purpose.

In no event will STM Journals, its related partnerships or corporations, or the partners, agents, or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information in this Site or for any consequential, special or similar damages, even if advised of the possibility of such damages.

GUEST CONTRIBUTORS DISCLAIMER

This Site may include content from guest contributors and any views or opinions expressed in such posts are personal and do not represent those of STM Journals or any of its staff or affiliates unless explicitly stated.

LOGOS AND TRADEMARKS DISCLAIMER

All logos and trademarks of third parties referenced on https://journals.stmjournals.com/ are the trademarks and logos of their respective owners. Any inclusion of such trademarks or logos does not imply or constitute any approval, endorsement, or sponsorship of STM Journals by such owners.

CONTACT US

Should you have any feedback, comments, requests for technical support, or other inquiries, please contact us by email: [email protected].