Subscribed Libraries
Management ePaper
Total: 5217
| Sn | Title | Abstract | Full Text |
|---|---|---|---|
| 1 | Contact Stress Analysis of Needle Roller Bearing Used in Synchromesh Gear Box | Abstract | Full Text |
| 2 | Dynamic Approach to Evaluate Costing through Software with Integration of CAD/CAM | Abstract | Full Text |
| 3 | AUTOMOTIVE VALVE-TRAIN COMPONENTS DURABILITY ANALYSIS USING FINITE ELEMENT METHOD APPROACH: A REVIEW | Abstract | Full Text |
| 4 | Optimization of Surface Roughness and Material Removal Rate for Dry Turning Operation in CNC Lathe UsingTaguchi Method | Abstract | Full Text |
| 5 | Finite Element Approach for Sheet Metal Forming and Springback: A Review | Abstract | Full Text |
| 6 | Design of Gear Tooth Rounding and Chamfering Machine | Abstract | Full Text |
| 7 | DESIGN AND MANUFACTURING OF MARINE PROPELLER | Abstract | Full Text |
| 8 | Disc Spring Washer: Design and Axisymmetric analysis using ANSYS | Abstract | Full Text |
| 9 | Design and Development Pneumatic Operated Washer Making Machine | Abstract | Full Text |
| 10 | Optimization of Machining Parameters on End Milling of Steel Grade EN 8: A Review | Abstract | Full Text |
| 11 | A Review on “Optimization of Process Parameters for Honing Process of GG25 Cylinder Liner†| Abstract | Full Text |
| 12 | Sand Casting Process Optimization via Design of Experiments: A Review | Abstract | Full Text |
| 13 | Injection of Air Bubbles and its Effects into A Shell and Coiled Heat Exchanger: A Review | Abstract | Full Text |
| 14 | Experimental Investigation of Effect of Temperature and Molarity on Compressive Strength of Geopolymer Concrete | Abstract | Full Text |
| 15 | Thermo-mechanical Analysis of Orthotropic plate under Sinusoidally Distributed Thermal load by using Trigonometric shear Deformation Theory (TSDT) | Abstract | Full Text |
| 16 | Vibration of Square Plate | Abstract | Full Text |
| 17 | Study: Finite Element Analysis for Thick Wall Cylinder | Abstract | Full Text |
| 18 | Experimental Investigations of Mass Flow Rate on Regression Rate of Hybrid Rocket | Abstract | Full Text |
| 19 | Aspect Ratio Analysis of Tall Building High Seismic Zone Using Base Isolation Technique | Abstract | Full Text |
| 20 | Design and development of experimental setup for measurement of velocity by using Pitot tube | Abstract | Full Text |
| 21 | Modelling of An Electric Tractor Powertrain using MATLAB/Simulink | Abstract | Full Text |
| 22 | The Effect of Compression on Sound Absorption of Multi-layered Isotropic and Transversely Isotropic Porous Materials at Oblique Incidence | Abstract | Full Text |
| 23 | CFD Analysis of Savonius VAWT for Household Application | Abstract | Full Text |
| 24 | FEA Simulation for Optimization of Laminated Composite Plate with Cutout in Free Vibrations | Abstract | Full Text |
| 25 | Study of Free Vibration Analysis of Circular Laminated Plate Based on FSDT | Abstract | Full Text |
| 26 | Study of Experimental and Finite Element analysis of Composite Mudguard for Performance Enhancement with Existing Material | Abstract | Full Text |
| 27 | Thermomagnetic Convection in a Ferrofluid Layer with Throughflow | Abstract | Full Text |
| 28 | UTM Testing and Comparison of Mechanical Properties of Composite Material Specimens Manufactured using Fused Deposition Modeling | Abstract | Full Text |
| 29 | Design and Comparative Analysis of UAV Body Prototype with ABS and CF + ABS as Structural Materials | Abstract | Full Text |
| 30 | Crack Initiation, Propagation and Stress Intensity Factor of Rectangular Plate with Circular Hole by FEA Approach | Abstract | Full Text |
| 31 | Modeling and Acoustic Analysis of Noise Vibration in Automotive Gearbox by Non-destructive Testing | Abstract | Full Text |
| 32 | Design and Fabrication of Rice Seedling Plantation Machine | Abstract | Full Text |
| 33 | Experimental Investigation on Double Basin Solar Still System | Abstract | Full Text |
| 34 | Design and Fabrication of Pesticide Sprayer for Agriculture | Abstract | Full Text |
| 35 | Penetrative Thermomagnetic Convection in a Micropolar Ferrofluid Layer via Internal Heating | Abstract | Full Text |
| 36 | Water Modelling of Gating System | Abstract | Full Text |
| 37 | Optimization of Process Parameter in Electrical Discharge Machining | Abstract | Full Text |
| 38 | Solar Electric Vehicle | Abstract | Full Text |
| 39 | Review on Unconstrained Layer Damping Treatment and Its Applications | Abstract | Full Text |
| 40 | Design of Centrifugal Fan Impeller and Comparison with Industry Design: A Case Study | Abstract | Full Text |
| 41 | A Study on Tribological Behaviour of Fly Ash Filled Glass Fiber Reinforcement Epoxy Based Composites Using Taguchi Experimental Design | Abstract | Full Text |
| 42 | Approach to Perform Sentimental Analysis Using Graphology | Abstract | Full Text |
| 43 | A Study on Response Parameters of Injection Moulding Process in Polypropylene Plastic using Grey Relational Analysis | Abstract | Full Text |
| 44 | Life Assessment of a Pre Cracked Cricket Bat | Abstract | Full Text |
| 45 | Simultaneous Optimization of MIG Welding Process Parameters Using Taguchi with Principle Component Analysis | Abstract | Full Text |
| 46 | Modeling of Sintering Process for the Preparation of Magnetic Abrasives by RSM and ANN Models | Abstract | Full Text |
| 47 | Vibration analysis of Power transmission shafts in automobiles | Abstract | Full Text |
| 48 | Ce-TZP/Al2O3 Nanocomposites for Biomedical Implants | Abstract | Full Text |
| 49 | DESIGN AND FABRICATION OF EFFLUENT TREATMENT PLANT | Abstract | Full Text |
| 50 | Development and Characterization of Aluminum Alloy Reinforced with Hematite Particulate Composite for Automotive Application | Abstract | Full Text |
| 51 | Experimental investigations on mechanical properties of AL8081 reinforced with B4C particulate Mmc’s | Abstract | Full Text |
| 52 | Implementation of Laplace Transform in Various Science and Engineering Field and Relation of Laplace Transform with Z-Transform | Abstract | Full Text |
| 53 | Optimization of turning process parameters for Titanium grade 5 using Taguchi method | Abstract | Full Text |
| 54 | Similarity Solution of Two-dimensional Fluid Flow over a Flat Plate Using Shooting Technique | Abstract | Full Text |
| 55 | Fractional Homotopy Analysis Transform Method for a Fin Having Temperature Dependent Internal Heat Generation | Abstract | Full Text |
| 56 | Modeling and Numerical Simulation of Forged Ploughing Disc | Abstract | Full Text |
| 57 | Finite Difference Analysis of Plane Couette Flow using MATLAB | Abstract | Full Text |
| 58 | Brief Review of Fault Detection and Classification in Induction Motor | Abstract | Full Text |
| 59 | Effect of PWHT Cycle on Microstructure and Mechanical Properties of 1.25Cr-0.5Mo Weld | Abstract | Full Text |
| 60 | Analysis of Injection Moulding Process Parameters on PVC Material via Taguchi-ANOVA | Abstract | Full Text |
| 61 | Analysis of Hydrodynamic Characteristics of a Squeeze Film in O-Ring Assembly Under the Oscillating Motion | Abstract | Full Text |
| 62 | Stress Analysis of a Mechanical Joint from Recorded Data of a Single Component of Displacement | Abstract | Full Text |
| 63 | Drilling Effect on Fiber Composites: A Review | Abstract | Full Text |
| 64 | Intelligence Wide Angle Diffuser Relocation for Wind Tunnel | Abstract | Full Text |
| 65 | Study of Energy Recovery Method Using Pressure Exchanger Device for Various Capacities Reverse Osmosis Plants | Abstract | Full Text |
| 66 | Stress Analysis of Two-Dimensional Functionally Graded Thick Rotating Disks by Element Based Material Grading | Abstract | Full Text |
| 67 | Effect of Steel Slag and Bagasse Ash on Strength of Concrete | Abstract | Full Text |
| 68 | Vibration Mechanics of Hybrid Al 5083/SiCp/Fly Ash Composite Plates for its Use in Dynamic Structures | Abstract | Full Text |
| 69 | Characterization of Aluminum Metal-Matrix Composite with SiC and B4C Reinforcement with Different Weight Percentage | Abstract | Full Text |
| 70 | Experimental Investigation on Machining Characteristics of EN19 Alloy Steel Using CNC Vertical Machining Center | Abstract | Full Text |
| 71 | Numerical Analysis of Tube Fitted with Internal Baffles used in STHEx | Abstract | Full Text |
| 72 | Material Handling Device with Multiple DOF | Abstract | Full Text |
| 73 | Dynamic Analysis of Isotropic Annular Plate using Finite Element Method | Abstract | Full Text |
| 74 | Optimizing Milling Parameters in Face Milling Operation | Abstract | Full Text |
| 75 | Emission Analysis Of Butanol and Waste Cooking Oil in VCR Diesel Engine | Abstract | Full Text |
| 76 | Automated Recognition of Mechanical Parts with Machine Vision System | Abstract | Full Text |
| 77 | Effect of Ni Addition on the Hardness and Tensile Strength of Al – Cu Alloy Prepared by Powder Metallurgy Technique | Abstract | Full Text |
| 78 | On the Optimisation of fundamental frequency to determine the Optimal Design of Bracing System for A Three Storey One Bay Two Dimensional Planar Structure | Abstract | Full Text |
| 79 | STATIC STRUCTURAL ANALYSIS OF TURBOCHARGER TURBINE | Abstract | Full Text |
| 80 | Performance analysis of Butanol and Waste Cooking Oil bio-diesels in VCR diesel engine | Abstract | Full Text |
| 81 | Fabrication and Optimization of Process Parameters for Friction Stir Welding AA7075+10%wt.SiC Composite by Taugchi Method | Abstract | Full Text |
| 82 | Non-Homogeneous Effect on Vibration of Visco-Elastic Rectangular Plate Having Parabolically Varying Thickness in Both Directions | Abstract | Full Text |
| 83 | CONDITION BASED MONITORING AND FAULT DIAGONISTICS OF A MACHINE | Abstract | Full Text |
| 84 | Simultaneous Optimization of Multiple Performance Characteristics in MIG Welding for Machining AISI-304 Stainless Steel by Weighted Principle Component Analysis | Abstract | Full Text |
| 85 | Lean manufacturing for shop floor of Automotive industries: A study | Abstract | Full Text |
| 86 | Optimal Design of Gusset plate and Analysis of Bailey Steel Truss Joint | Abstract | Full Text |
| 87 | Design and Analysis of The Supporting Frame Structure of Cold Aggregate Feeder Unit of Asphalt Mixing Plant | Abstract | Full Text |
| 88 | Evaluation of the effect of fuel preheat on the performance and emission of a diesel engine using regression analysis. | Abstract | Full Text |
| 89 | Prediction of Bead Geometry Parameters using Response Surface Methodology and Finite Element Analysis of Gas Metal Arc Welded Joints of Aluminum Alloy | Abstract | Full Text |
| 90 | Performance Analysis and Emission Study of a C.I. Engine using Butanol, Biodiesel and Diesel Blends | Abstract | Full Text |
| 91 | EXPERIMENTAL INVESTIGATION OF WELDING PROCESS PARAMETERS ON MECHANICAL PROPERTIES FOR TIG WELDED AUSTENITIC STAINLESS STELL 304 JOINTS | Abstract | Full Text |
| 92 | Optimization of Process Parameters for Honing Procedure of GG25 Cylinder Liner by using Full Factorial Method | Abstract | Full Text |
| 93 | EXPERIMENTAL ANALYSIS OF STEELS ON HARDNESS IN ELECTRICAL DISCHARGE MACHINING | Abstract | Full Text |
| 94 | Estimation of Heat Transfer Rate with Conjugate Gradient Method | Abstract | Full Text |
| 95 | Numerical Modeling of Elastoviscoplastic Material Model in Strain Space | Abstract | Full Text |
| 96 | Investigation of Physical Characteristics and Machining Parameters of Improved Al-SiC MMC Using Dry EDM Process for Aerospace Industries | Abstract | Full Text |
| 97 | Experimental Investigation of Surface Modification on Copper (Cu) with Pen-Shaped Plasma Torch | Abstract | Full Text |
| 98 | An Application of PARETO Chart for Investigation of Defects in FNB Casting Process | Abstract | Full Text |
| 99 | Design and Analysis of Taper Roller Bearing – A Review | Abstract | Full Text |
| 100 | LIFE ESTIMATION OF A PRE-CRACKED CRICKET BAT | Abstract | Full Text |
All Libraries
LOCKED