Compact Fork-shaped Monopole Antenna for Bluetooth, WLAN and Wi-MAX Applications

Open Access

Year : 2021 | Volume : | Issue : 1 | Page : 1-6
By

    Jyoti Tripathi

  1. Saurabh Singh

  2. Sudhanshu Verma

  1. Student, Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, Uttar Pradesh, India
  2. Phd, Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, Uttar Pradesh, India
  3. Associate Professor, Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, Uttar Pradesh, India

Abstract

This paper presents a fork-shaped monopole antenna (FSMA) with compact size. The proposed FSMA consisting a fork-shaped radiator and a partial ground plane with L-shaped and rectangular slits. The size of the proposed FSMA is 34 × 18 × 1.6 mm3 which is fed by 50Ω microstrip line. The L-shaped slit is introduced in the ground plane to enhance the bandwidth impedance of the proposed FSMA. The proposed antenna achieved 10 dB return loss bandwidth of 120% (1.97–7.90) GHz with stable radiation pattern. The obtained result shows that proposed antenna is suitable for wide band applications like WLAN, Wi-MAX, Bluetooth and ISM band.

Keywords: Bluetooth, monopole antenna, rectangular ring, WLAN, WiMAX

[This article belongs to Trends in Opto-electro & Optical Communication(toeoc)]

How to cite this article: Jyoti Tripathi, Saurabh Singh, Sudhanshu Verma Compact Fork-shaped Monopole Antenna for Bluetooth, WLAN and Wi-MAX Applications toeoc 2021; 11:1-6
How to cite this URL: Jyoti Tripathi, Saurabh Singh, Sudhanshu Verma Compact Fork-shaped Monopole Antenna for Bluetooth, WLAN and Wi-MAX Applications toeoc 2021 {cited 2021 Apr 28};11:1-6. Available from: https://journals.stmjournals.com/toeoc/article=2021/view=90495

Full Text PDF Download

Browse Figures

References

1. Prasanna Paga, Nagaraj HC, Rukmini TS, Nithin NE. Design and fabrication of printed T monopole antenna for ISM Band application, International Conference on Microwave, Optical and Communication Engineering, December. IIT Bhubaneswar, India, 18–20, 2015.
2. Li Li, Xiaoliang Zhang, Xiaoli Yin, Le Zhou, A Compact Triple-Band Printed Monopole Antenna for WLAN/WiMAX Applications, IEEE Antennas Wirel Propag Lett. 15, 2016.
3. Devendra Kumar Sharma, Sanjeev Kulshrestha, Chakraborty SB, Mahajan MB, Rajeev Jyoti, Design of UWB Multi-Folded Patch Antenna at UHF Band, Antenna Systems Group, 2Microwave Remote Sensors Area Space Applications Centre, Indian Space Research Organisation, Ahmedabad, India.
4. Amiri, Ojaroudi N, Geran F, Ojaroudi M. A Novel and Compact Monopole Antenna with BandStop Performance for UWB Applications, 20th Telecommunications forum TELFOR 2012, Serbia, Belgrade. November 20–22, 2012.
5. Anil Kamma, Shrikanth Reddy G, Sanjeev K Mishra, Jayanta Mukherjee, Printed Band–notched U shaped Ultra Wide Band Antenna with Modified Split Ring Resonator, 2012 IEEE Asia-Pacific Conference on Antennas and Propagation. Singapore, August 27–29, 2012.
6. Golezani JJ, Abbas M, Ibrahim Akduman, Modified Directional Wide Band Printed Monopole Antenna for Use in Radar and Microwave Imaging Applications, Istanbul Technical University, Istanbul, Turkey, Prog Electromagn Res Lett. 2012; 33, 119–129.
7. Dissanayake T, Esselle K, Ge Y. Low-Cost Printed Monopole Antennas for Wideband Applications, CELANE. Department of Electronics. ICS. Macquarie University. Sydney. NSW2109, Australia.


Regular Issue Open Access Article
Volume 11
Issue 1
Received April 1, 2021
Accepted April 20, 2021
Published April 28, 2021