Open Access
J.FANEY,
Dr. M.HEMAPRIYA,
- Research Scholar Department of Civil Engineering, Bharath Institute of Higher Education and Research, Chennai, Tamil Nadu India
- Associate Professor Department of Civil Engineering, Bharath Institute of Higher Education and Research, Chennai, Tamil Nadu India
Abstract
This study reviews the literature on fiber-reinforced polymers (FRP) and their applications in near-surface mounted (NSM) applications. Since fiber-reinforced polymer (FRP) composites outperform many conventional steel reinforcing methods in terms of quality, they are nearly entirely dependent on advanced concrete technology. Many structures that will still be in use two decades from now have already been constructed. A portion of these structures must undergo enhancements or be replaced, as they are deteriorating not only from natural processes but also from mistakes made during their design and construction. Near-surface mounted (NSM) utilizing Fiber-Reinforced Polymer (FRP) bars has proven to be a successful method in enhancing the flexural and shear performance of both existing and new Reinforced Concrete (RC) elements. Structural strengthening is a challenging endeavor. Many systems might be employed to make the best use of the fiber-reinforced polymer. There is a growing need for better strengthening methods for existing concrete structures. Structuring might be difficult, but various methods can be used to make the best use of fiber-reinforced polymer. Some of these structures need to be upgraded or rebuilt because, in addition to natural deterioration, their design and construction errors are also to blame. The effectiveness of strengthening RC columns using near-surface mounted (NSM) CFRP strips with CFRP confinement was studied. Near-surface mounted (NSM) utilizing Fiber-Reinforced Polymer (FRP) bars has proven to be a successful method in enhancing the flexural and shear performance of both existing and new Reinforced Concrete (RC) elements. The efficiency of Reinforcement using Carbon Fiber Near-surface mounted (NSM) polymer strips examined was CFRP confinement to reinforced columns. Near surface-mounted reinforcement is a useful choice with numerous advantages over externally bounded reinforcement.
Keywords: Near-surface Mounted, Failure mode, Strain distribution, Strengthening applications, Concrete structures, Fiber-reinforced polymer.
References
- Jamal A. Abdallaa, Raed Abokwieka, Rami A. Hawileha, “Models for Predicting Strength of RC Columns Strengthened with NSM-CFRP Strips and CFRP-Fabric Wraps” ICSI 2021 The 4th International Conference on Structural Integrity 2022.
- Bhuvaneshwaran Mylsamy, Senthil Kumar Maruthamuthu Shanmugam, Karthik Aruchamy, Sivasubramanian Palanisamy, Rajini Nagarajan, Nadir Ayrilmis, “A review on natural fibre composites: Polymer matrices, fiber surface treatments, fabrication methods, properties and applications” Polymer Engineering and Science 2023; http://doi.org/10.1002/pen.26713.
- Rittin Abraham Kurien, D.Philip Selvaraj, M.Sekar, Chacko Preno Koshy, Cherian Paul, Sivasubramanian Palanisamy, Carlo Santulli, Praveen Kumar, “A comprehensive review on the mechanical, physical and thermal properties of abaca fibre for their introduction into structural polymer composites” Volume 30, Pages 8643-8664 by Springer 2023.
- Sumesh KR, Ajithram A, Sivasubramanian Palanisamy & Kavimani V, “Mechanical properties of ramie/flax hybrid natural fibre composites under different conditions” 21 August 2023 by Springer.
- Sivasubramanian Palanisamy, Mayandi Kalimuthu, Rajini Nagarajan, Jose Maria Fernandes Marlet, Carlo Santulli,“Physical, Chemical and Mechanical Characterization of Natural Bark Fibers (NBFs) Reinforced Polymer Composites: A Bibliographic Review ” 2023; 11(2) 13, http://doi.org/10.3390/fib11020013.
- Younes Jahani, Marta Baena, Cristina Barris, Torres, Sena-Cruz “Effect of fatigue loading on flexural performance of NSM CFRP-strengthened RC beams under different service temperatures” The Author published by Elsevier 2022.
- Mohamed Ibrahima, Tadesse Wakjiraa, Usama Ebeada, “Shear strengthening of reinforced concrete deep beams using near-surface mounted hybrid carbon/glass fiber reinforced polymer strips” 20 February 2020 by Elsevier.
- T. Obaidat, G. Abu-Farsakh, A. Ashteyat, Retrofitting of partially damaged reinforced concrete beam-column joints using various plate-configurations of CFRP under cyclic loading, Construction Building Materials 198 (1) 2019; 313–322, https://doi.org/10.1016/j.conbuildmat.2018.11.267. Elsevier.
- S. Barham, Y.T. Obaidat, A. Al-Maabreh, Effect of aggregate size on the bond behavior between carbon fiber-reinforced polymer sheets and concrete, J. Mater. Civ. Eng. 31 (12) ;2019.
- Yaqub, C.G. Bailey, Repair of fire damaged circular reinforced concrete columns with FRP composites, Constr. Build. Mater. 25;2017; 359–370.
- Yaqub, C.G. Bailey, Cross-sectional shape effects on the performance of post-heated reinforced concrete columns wrapped with FRP composites, Compos. Struct. 93;2011; 1103–1117.
- Ali, Structural reliability of biaxial loaded Short/Slender-Square FRP-confined RC columns, Constr. Build. Mater. 151;2017; 370–382.
- T. Obaidat, R. Haddad, M. Abdulwahab, Innovative strengthening schemes of concrete cantilever beams using CFRP sheets: end anchorage effect, Constr. Build. Mater.
- Al-Nimry, A. Soman, On the slenderness and FRP confinement of eccentrically- loaded circular RC columns, Eng. Struct. 164;2018; 92–108.
- M. Nguyen, T.K. Chan, H.K. Cheong, Brittle failure and bond development length of CFRP-concrete beams, J. Compos. Constr. 5;2002.
- Toutanji, P. Balaguru, Durability characteristics of concrete columns wrapped with FRP tow sheets, J. Mater. Civ. Eng. 10 (2002).
- Lam, J. Teng, Design-oriented stress-strain model for FRP-confined concrete, Constr. Build. Mater. 17 (6–7);2003; 471–489.
- Rocca, N. Galati, A. Nanni, Interaction diagram methodology for the design of FRP- confined reinforced concrete columns, Constr. Build. Mater. 23 (4);2009; 1508–1520.
- Hadi, Behavior of eccentric loading of FRP confined fiber steel reinforced concrete columns, Constr. Build. Mater. 23 (2) 2009; 1102–1108.
- Demers, K. Neale, Confinement of reinforced concrete columns with fiber-reinforced composite sheets – an experimental study, Can. J. Civ. Eng. 26 (2) 1999; 226–241.
- Pham, M. Hadi, Confinement model for FRP confined normal- and high-strength concrete circular columns, Constr. Build. Mater. 69;2014; 83–90.
- American Concrete Institute, ACI Committee318. Building Code Requirements for Structural Concrete Commentary (ACI 318R–014), American Concrete Institute, Farmington Hills, MI, 2014.
- K.Chinthapalli, M.Chellapandian, S, “Effectiveness of hybrid fiber-reinforced polymer retrofitting on the behavior of fire damaged RC columns under axial compression” ASTM Book of Standards, American Society for Testing Materials, 2010.
- Hui Peng, Hao Wang, Junmin Chen, and Kebo Zhang, “Experimental Study on Bond Performance of Near-Surface-Mounted CFRP Strips Concrete Interface” 978-0- 7695-5016-9/13 IEEE, DOI 10.1109/ICDMA.2013;138.
Journal of Polymer and Composites
Volume | |
Received | April 23, 2024 |
Accepted | June 26, 2024 |
Published | July 26, 2024 |