AI-Driven Innovation in Biomaterials: Predictive Modeling and Design for the Future

Year : 2024 | Volume : 11 | Issue : 03 | Page : 25 35
    By

    Prasanna Raut,

  • Devakant Baviskar,

  1. Research Scholar, Department of Mechanical Engineering, Veermata Jijabai Technological Institute, Matunga, Maharashtra, India
  2. Assistant Professor, Department of Mechanical Engineering, Veermata Jijabai Technological Institute, Matunga, Maharashtra, India

Abstract

The integration of artificial intelligence (AI) is revolutionizing the field of biomaterials, paving the way for innovative approaches in their development and production. This paper examines the connection between AI and biomaterials, emphasizing the substantial impact of predictive modeling on the evolution of the field. By examining recent research and cutting-edge uses, the document shows how AI-powered predictive modeling has revolutionized biomaterial design, marking a period of unparalleled precision and effectiveness. It discusses a range of AI technologies, including deep neural networks and machine learning, that enable the creation of predictive models using large datasets to anticipate the behavior, properties, and interactions of biomaterials. The document also discusses how AI can speed up the evaluation of possible materials, improve their attributes, and forecast their impacts in biological settings, thereby bridging the gap between lab findings and real-world applications. Furthermore, the document looks into what lies ahead and the obstacles in combining AI and biomaterials, emphasizing the need for cross-disciplinary teamwork, standardization of data, and ethical considerations

Keywords: AI, Biomaterials, deep neural network, Machine learning

[This article belongs to Trends in Machine design ]

How to cite this article:
Prasanna Raut, Devakant Baviskar. AI-Driven Innovation in Biomaterials: Predictive Modeling and Design for the Future. Trends in Machine design. 2024; 11(03):25-35.
How to cite this URL:
Prasanna Raut, Devakant Baviskar. AI-Driven Innovation in Biomaterials: Predictive Modeling and Design for the Future. Trends in Machine design. 2024; 11(03):25-35. Available from: https://journals.stmjournals.com/tmd/article=2024/view=188845


References

  1. Mateu-Sanz, M., Fuenteslópez, C. V., Uribe-Gomez, J., Haugen, H. J., Pandit, A., Ginebra, M. P., & Samara, A. (2023). Redefining biomaterial biocompatibility: challenges for artificial intelligence and text mining. Trends in Biotechnology.
  2. McDonald, S. M., Augustine, E. K., Lanners, Q., Rudin, C., Catherine Brinson, L., & Becker, M. L. (2023). Applied machine learning as a driver for polymeric biomaterials design. Nature Communications, 14(1), 4838
  3. Devkant Bhaviskar et.al, “Design of XY Planer Mechanism using DFM for Parallel-Kinematic Micro Positioning XY Stage”, Stage Eur. Chem. Bull. 2022,11. (Issue 11), 222-228 DOI: 10.48047/ecb/2022.11.11.25
  4. Shrishail Sollapur, Pratik Waghmare, “Design and Experimental Investigation of XY Compliant Mechanism for Precision Applications”, ECS Transactions, 2022/4/24, Volume 107 Issue 1 Pages 4967. DOI 10.1149/10701.4967ecst
  5. Basu, B., Gowtham, N. H., Xiao, Y., Kalidindi, S. R., & Leong, K. W. (2022). Biomaterialomics: Data science-driven pathways to develop fourth-generation biomaterials. Acta Biomaterialia, 143, 1-25.
  6. Sollapur, S. B., Waghmare, P. M., PATIL, M., & Deshmukh, S. (2021). Design And Experimental Testing Of Xy Flexure Mechanism. Journal of Engineering Science and Technology, 16(2), 1416-1425.
  7. Shrishail Sollapur & Shraddha Gunjawate, “Structural Analysis and Topology Optimization of Leaf Spring Bracket”, International Journal of Engineering Research & Technology (IJERT) Vol. 9 Issue 07, July-2020. pp. 1448-1494
  8. Shrishail Sollapur, M S Patil, S P Deshmukh, “Advancement and Experimental Investigation of Voice Coil Actuator utilizing Flexural Bearing”, Journal of Mechatronics and Automation, STM Journals, Vol 5,Issue 2, 2018. pp. 40-45
  9. Stuart, S., Watchorn, J., & Gu, F. X. (2023). Sizing up feature descriptors for macromolecular machine learning with polymeric biomaterials. npj Computational Materials, 9(1), 102.
  10. S B Sollapur et. al “Experimental Investigation of High Precision XY Mechanism”, International Journal of Mechanical Engineering and Technology,9(5),2018,pp.43–50.
  11. P M Waghmare et al, “A Review Paper On Flexure” International Journal for Science and Advance Research In Technology, Vol 3, Issue 10 , 2017.
  12. Toradmal, Kuldeep P., Pratik M. Waghmare, and Shrishail B. Sollapur. “Three point bending analysis of honeycomb sandwich panels: experimental approach.” International Journal of Engineering and Techniques 3.5 (2017).
  13. Awasthi, A., Saxena, K. K., & Arun, V. (2020). Sustainability and survivability in manufacturing sector. In Modern Manufacturing Processes (pp. 205-219). Woodhead Publishing
  14. Z. Akbarzadeh, M. Sarraf, E.R. Ghomi, V.V. Kumar, M. Salehi, S. Ramakrishna, S. Bae, A state-of-the-art review on recent advances in the fabrication and characteristics of magnesium-based alloys in biomedical applications, Journal of Magnesium and Alloys, (2024).
  15. Le, T., & Bojovschi, A. (2019). Employing Artificial Intelligence To Design Intelligent Biomaterials. Journal Of Experimental & Molecular Biology, 20(3).
  16. Khilare, Umesh A., and S. B. Sollapur. “Investigation of Residual Stresses and Its Effect on Mechanical Behaviour of AISI310.”
  17. Umesh K, “Identifying Design Alternative For Piping System Upon Assessment Of Composite Material For Suitability To The Engineering Application”, In International Journal of Advanced Engineering Research and Studies EISSN2249– 8974 III/IV/July-Sept.,2014
  18. Shrishail, B. Sollapur, and P. Deshmukh Suhas. “XY scanning mechanism: a dynamic approach.” International Journal of Mechanical Engineering and Robotics Research 3.4 (2014): 140.
  19. Gireesh, Belawagi, B. Sollapur Shrishail, and V. N. Satwik. “Finite element & experimental investigation of composite torsion shaft.” Int. J. Engg. Research and Applications 3.2 (2013): 1510-1517.
  20. Mozafari, N., Mozafari, N., Dehshahri, A., & Azadi, A. (2023). Knowledge Gaps in Generating Cell-Based Drug Delivery Systems and a Possible Meeting with Artificial Intelligence. Molecular Pharmaceutics, 20(8), 3757-3778.
  21. Sollapur, Shrishail B., M. S. Patil, and S. P. Deshmukh. “Design and development aspects of flexure mechanism for high precision application.” AIP Conference Proceedings. Vol. 1943. No. 1. AIP Publishing, 2018. https://doi.org/10.1063/1.5029599
  22. Waghmare, Pratik M., Pankaj G. Bedmutha, and Shrishail B. Sollapur. “Investigation of effect of hybridization and layering patterns on mechanical properties of banana and kenaf fibers reinforced epoxy biocomposite.” Materials Today: Proceedings 46 (2021): 3220-3224. https://doi.org/10.1016/j.matpr.2020.11.194
  23. Shinde, Tarang, et al. “Fatigue analysis of alloy wheel using cornering fatigue test and its weight optimization.” Materials Today: Proceedings 62 (2022): 1470-1474. https://doi.org/10.1016/j.matpr.2022.02.023
  24. Sollapur, Shrishail, M. S. Patil, and S. P. Deshmukh. “Position Estimator Algorithm Implementation on Precision Applications.” Materials Today: Proceedings 24 (2020): 333-342. https://doi.org/10.1016/j.matpr.2020.04.283
  25. Baviskar, D.D., Rao, A.S., Sollapur, S. et al. Development and testing of XY stage compliant mechanism. Int J Interact Des Manuf (2023). https://doi.org/10.1007/s12008-023-01612-1
  26. Waghmare, Pratik M., Shrishail B. Sollapur, and Shweta M. Wange. “Concrete Solar Collector.” Advances in Smart Grid and Renewable Energy: Proceedings of ETAEERE-2016. Springer Singapore, 2018. https://doi.org/10.1007/978-981-10-4286-7_46
  27. Vinod, M., Kumar, C.A., Sollapur, S.B. et al. Study on Fabrication and Mechanical Performance of Flax Fibre-Reinforced Aluminium 6082 Laminates. J. Inst. Eng. India Ser. D (2023). https://doi.org/10.1007/s40033-023-00605-4
  28. Raut, P.P., Rao, A.S., Sollapur, S. et al. Investigation on the development and building of a voice coil actuator-driven XY micro-motion stage with dual-range capabilities. Int J Interact Des Manuf (2023). https://doi.org/10.1007/s12008-023-01665-2.
  29. Guo, J. L., Januszyk, M., & Longaker, M. T. (2023). Machine learning in tissue engineering. Tissue Engineering Part A, 29(1-2), 2-19.
  30. Venkate Gowda, C., Nagaraja, T.K., Yogesha, K.B. et al. Study on Structural Behavior of HVOF-Sprayed NiCr/Mo Coating. J. Inst. Eng. India Ser. D (2024). https://doi.org/10.1007/s40033-024-00641-8
  31. Devakant Baviskar Shrishail Sollapur, Dr Mahesh M Kawade, Prasanna Raut, “An ANN Approach to Determine the Surface Roughness in End Milling Cutter”, International Journal of Research Publication and Reviews(2024), Vol 1, issue5, page 4360-4365.
  32. Rickert, C. A., & Lieleg, O. (2022). Machine learning approaches for biomolecular, biophysical, and biomaterials research. Biophysics Reviews, 3(2).
  33. Sollapur, S.B., Sharath, P.C., Waghmare, P. (2024). Applications of Additive Manufacturing in Biomedical and Sports Industry. In: Rajendrachari, S. (eds) Practical Implementations of Additive Manufacturing Technologies. Materials Horizons: From Nature to Nanomaterials. Springer, Singapore. https://doi.org/10.1007/978-981-99-5949-5_13
  34. Chate, Ganesh R., et al. “Ceramic material coatings: emerging future applications.” Advanced Ceramic Coatings for Emerging Applications. Elsevier, 2023. 3-17. https://doi.org/10.1016/B978-0-323-99624-2.00007-3
  35. Pankaj G. Bedmutha, Pratik M. Waghmare, Shrishail B.Sollapur “MECHANICAL PROPERTIES OF BAMBOO FIBER REINFORCED PLASTICS” Internation Journal for Science and Advance Research In Technology, 3(9),(2017), pp 365-368
  36. Sollapur, S., Patil, M.S., Chaporkar, K., Misal, A., Bhoyar, R., Dhole, K. (2020). Design and Development of Constrain Based XY Flexural Mechanism. In: Pawar, P., Ronge, B., Balasubramaniam, R., Vibhute, A., Apte, S. (eds) Techno-Societal 2018. Springer, Cham. https://doi.org/10.1007/978-3-030-16962-6_27
  37. Chikkangoudar, R.N., Patil, C., Panchal, R.N. et al. Investigating Joint-Free Mechanical Systems with PLA and ABS Materials Using the Fuse Deposition Modelling Method. J. Inst. Eng. India Ser. D (2024). https://doi.org/10.1007/s40033-024-00659-y
  38. Arun, V., Singh, A. K., Shukla, N. K., & Tripathi, D. K. (2016). Design and performance analysis of SOA– MZI based reversible toffoli and irreversible AND logic gates in a single photonic circuit. Optical and quantum electronics, 48, 1-15.
  39. V. Kumar, D. Narayanan, S. Chandran, S. Rajendran, S. Ramakrishna, Lightweight and sustainable self-reinforced composites, in: Lightweight and Sustainable Composite Materials, Elsevier, 2023, pp. 19-46.
  40. Sollapur, S., Shinde, T., Raut, S., Atpadkar, A., Nimbalkar, P., Rathod, M. (2024). Design and Development of High-Precision Scanning Flexural Mechanism Using PID. In: Sachdeva, A., Goyal, K.K., Garg, R.K., Davim, J.P. (eds) Recent Advances in Operations Management and Optimization. CPIE 2023. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-99-7445-0_4
  41. Ramadugu, S., Ledella, S. R. K., Gaduturi, J. N. J., Pinninti, R. R., Sriram, V., & Saxena, K. K. (2023). Environmental life cycle assessment of an automobile component fabricated by additive and conventional manufacturing. International Journal on Interactive Design and Manufacturing (IJIDeM), 1-12.
  42. V. Kumar, S. Ramakrishna, S. Rajendran, S. Surendran, Enhancing the material properties of carbon fiber epoxy composite by incorporating electrospun polyacrylonitrile nanofibers, Materials Today: Proceedings, 67 (2022) 1-4.
  43. Jha, R., & Jha, B. K. (2022). Artificial Intelligence-aided Materials Design: AI-algorithms and Case Studies on Alloys and Metallurgical Processes. CRC Press.
  44. Arunadevi, M., Veeresha, G., Kharche, A.W. et al. Enhancing surface quality of metal parts manufactured via LPBF: ANN classifier and bayesian learning approach. Int J Interact Des Manuf (2024). https://doi.org/10.1007/s12008-024-01942-8
  45. Pratik Waghmare, “Development and Performance Investigation of Solar Concrete Collector at Different Climatic Conditions”, Indian Journal of Engineering and Materials Sciences, https://doi.org/10.56042/ijems.v30i2.1384
  46. S B Sollapur et. al “Mechanical Properties of Bamboo Fiber Reinforced Plastics”, IJSART – Volume 3 Issue 9 –SEPTEMBER 2017 ISSN [ONLINE]: 2395-1052, Page | 365-368
  47. Prasanna Raut et. Al, “Design and Testing of Flexural Kinematic Mechanism using Large Workspace”, Eur. Chem. Bull. 2022, 11(Issue 12), 213-221, DOI: 10.48047/ecb/2022.11.12.025
  48. Shrishail Sollapur, Saravanan, D., et al. “Tribological properties of filler and green filler reinforced polymer composites.” Materials Today: Proceedings 50 (2022): 2065-2072. https://doi.org/10.1016/j.matpr.2021.09.414
  49. Swapnil S. Shinde, Shrishail B Sollapur, “Effect of Residual Stress on the Mechanical Behavior of AISI 304, For TIG Welding”, International Journal of Scientific & Engineering Research Volume 8, Issue 10, October-2017.
  50. Deore, O. B., & Sollapur, S. (2020). Design and Analysis of Complaint Mechanism using FEA. International Journal of Modern Trends in Engineering and Research (IJMTER), 7(10). DOI:10.21884/IJMTER.2020.7059.BWQR6
  51. S B Sollapur, “Evaluation of Stiffness and Parametric Modeling of XY Flexure Mechanism for Precision Applications”, Journal of Modeling and Simulation of Materials, vol. 1, no. 1, pp. 8-15, May 2018. doi: 10.21467/jmsm.1.1.8-15
  52. Patil, Sandeep, et al. “Thermo-Mechanical Analysis of Crankcase.” IOSR. J. of Mechanical and Civil Engineering 12.5 (2015): 13-18.
  53. Vinod, M., Kumar, C.A., Sollapur, S.B. et al. Study on Low-Velocity Impact Performance of Chemical Treated Flax Fibre-Reinforced Aluminium 6082 Laminates. J. Inst. Eng. India Ser. D (2024). https://doi.org/10.1007/s40033-024-00657-0
  54. Kolluru, A. Thakur, D. Tamakuwala, V.V. Kumar, S. Ramakrishna, S. Chandran, Sustainable recycling of polymers: a comprehensive review, Polymer Bulletin, (2024) 1-42. https://doi.org/10.1007/s00289-024-05195-z
  55. Math, M.M., Rao, K.V.S.R., Gururaja, M.N. et al. Enhanced Tribological Properties of Nano-TiO2 Reinforced Polymer Composites Fabricated via Stereolithography. J. Inst. Eng. India Ser. D (2024). https://doi.org/10.1007/s40033-024-00752-2
  56. Kattimani, M.A., Venkatesh, P.R., Masum, H.Vikram N bahuddurdesia et al. Design and numerical analysis of tensile deformation and fracture properties of induction hardened in conel 718 superalloy for gas turbine applications. Int J Interact Des Manuf (2023). https://doi.org/10.1007/s12008-023-01452-z
  57. Maruthi Prashanth B H, Ramesh S, P S Shivakumar Gouda, Gajanan M Naik, Priyaranjan Sharma, C Jagadeesh, Mahantesh M Math and Gajanan Anne. Impact of ply stacking sequence on the mechanical response of hybrid Jute-Banana fiber phenoplast composites Materials Research Express, Volume 11, Number 5.DOI 10.1088/2053-1591/ad425c
  58. Jabiulla, S., Kirthan, L.J., Kumaraswamy, G.N. et al. Evaluation of the Reliability of Computational Fracture Mechanics Approaches for Compact Tension Specimen. J. Inst. Eng. India Ser. D (2024). https://doi.org/10.1007/s40033-024-00697-6
  59. Jabiulla, S., Kirthan, L.J., Kumar, R.G. et al. Experimental and Numerical Evaluation of In-plane Tensile Mode Stress Intensity Factor for Edge Crack Using Empirical Formulation of Displacement Extrapolation Method. J. Inst. Eng. India Ser. D (2024). https://doi.org/10.1007/s40033-024-00640-9

 

Regular Issue Subscription Review Article
Volume 11
Issue 03
Received 07/10/2024
Accepted 24/10/2024
Published 11/12/2024
435

Login


My IP

PlumX Metrics