Design of Lead-Free Perovskite (CH3NH3SnX3, X=I) Solar Cell using SCAPS-1D

Notice

This is an unedited manuscript accepted for publication and provided as an Article in Press for early access at the author’s request. The article will undergo copyediting, typesetting, and galley proof review before final publication. Please be aware that errors may be identified during production that could affect the content. All legal disclaimers of the journal apply.

Year : 2025 | Volume :12 | Issue : 01 | Page : –
    By

    Saurabh Singh,

  • Dr. Harsh Vikram Singh,

  1. , Department of Electronics Engineering, Kamla Nehru Institute of Technology Sultanpur, Uttar Pradesh, India
  2. Head of Department, Department of Electronics Engineering, Kamla Nehru Institute of Technology Sultanpur, Uttar Pradesh, India

Abstract

document.addEventListener(‘DOMContentLoaded’,function(){frmFrontForm.scrollToID(‘frm_container_abs_160532’);});Edit Abstract & Keyword

Research on renewable energy conversion technology has accelerated due to the world’s growing energy needs. Researchers from all over the world are interested in lead-based perovskite materials. These cells are being developed as a substitute for conventional solar cells (SCs) because they have the potential to increase solar energy conversion efficiency. Lead’s advantageous electrical and optical characteristics make it a viable option for photovoltaic and optoelectronic applications. Lead’s limited material stability and poisonous nature, however, limit its potential for use in new products. In order to avoid lead, researchers are concentrating on creating environmentally benign perovskite solar cells. Using lead free perovskite material such as “methyl ammonium Tin tri halide (MASnX3, MA= CH3NH3, X=I)” and SCAPS tools, extensive modeling and numerical simulation of perovskite solar cells were conducted. Measurements such as “open-circuit voltage (Voc), fill factor (FF), power conversion rate (PCE), along with short-circuit current density (Jsc) of the MASnI3 material used as active layer, respectively” were performed.” “In the envisioned structure of the perovskite solar cell, the copper thiocyanate (CuSCN) molecule plays a crucial role as a   hole  transmitting Layer  (HTL). “The features structure parameters for CH3NH3SnI3 like a fill factor (FF) of 14.76, a power conversion rate (PCE) of 30.69%, an open circuit voltage (Voc) of 6.7060, along with a short circuit current density (Jsc) of 30.9950 mAcm-2, according to the findings of the simulation.

Keywords: Perovskite solar cell, CuSCN, FF, Voc, Jsc, PCE, C-V and C-F characteristics, CH3NH3SnI3

[This article belongs to Journal of Semiconductor Devices and Circuits (josdc)]

How to cite this article:
Saurabh Singh, Dr. Harsh Vikram Singh. Design of Lead-Free Perovskite (CH3NH3SnX3, X=I) Solar Cell using SCAPS-1D. Journal of Semiconductor Devices and Circuits. 2025; 12(01):-.
How to cite this URL:
Saurabh Singh, Dr. Harsh Vikram Singh. Design of Lead-Free Perovskite (CH3NH3SnX3, X=I) Solar Cell using SCAPS-1D. Journal of Semiconductor Devices and Circuits. 2025; 12(01):-. Available from: https://journals.stmjournals.com/josdc/article=2025/view=0

document.addEventListener(‘DOMContentLoaded’,function(){frmFrontForm.scrollToID(‘frm_container_ref_160532’);});Edit

References

  1. Hosenuzzaman , N.A. Rahim , J. Selvaraj , M. Hasanuzzaman , A.B.M.A. Malek , A. Nahar, “Global prospects, progress, policies, and environmental impact of solar photovoltaic power generation,” Renewable and Sustainable Energy Reviews 41, 284–297, (2015).
  2. Kiran ranabhat, Leev patrikeev, Kirill andrianov, Valerii lapshinsky, Elena sofronova “An Introduction to Solar Cell Technology,” 14(2016)4, 405, 481 – 491.
  3. Tanuj Tiwari, 2018. “Next generation Soler Power technology”, www.electronicsforu.com, May18.
  4. Rashmi Swami, 2012. “Solar Cell,” International Journal of Scientific and Research Publications, Volume 2, Issue 7, July 1 ISSN 2250-3153.
  5. Askari Mohammad Bagher, “Comparison of organic solar cells and inorganic solar cells,” International Journal of Renewable and Sustainable Energy, 3(3): 53-58, 2014.
  1. Mohammad Tawheed Kibria, Akil Ahammed, Saad Mahmud Sony, Faisal Hossain, Shams-Ul-Islam, “A Review Comparative studies on different generation solar cells technology,” ICEAB, Paper ID E33,
  2. Shruti Sharma, Kamlesh Kumar Jain, Ashutosh Sharma, “Solar cell: In Research and Application –A Review Materials Sciences and Applications,” 2015, 6, 1145-1155.
  3. -W. Chen, S.-Y. Hsiao, C.-Y. Chen, H.-W. Kang, Z.-Y. Huang and H.-W. Lin, “Optical properties of Organometal halide perovskite thin films and general device structure design rules for perovskite single and tandem solar cells,” 3, 9152-9159, 2015.
  4. Giordano F, Abate A, Correa Baena J P, Saliba M, Matsui T,Im S H, Zakeeruddin S M, Nazeeruddin M K,Hagfeldt A and Graetzel M, “Enhanced electronic properties in mesoporous TiO2 via lithium doping for high efficiency perovskite solar cells,” 7 10379,
  5. J. Taghavi, M. Houshmand, M. H. Zandi and N. E. Gorji, “Modeling of optical losses in perovskite solar cells,” 97, 424-428, 2016.
  6. Ravi Shankar Yadav, Major G.S. Tripathi, Bramha P. Pandey, “ Effect of ETL layer thickness on perovskite (CH3NH3PbI3) solar cell,” Trends in Opto-Electro & Optical Communication, Volume 9, ISSN: 2231-0401, ISSN: 2347-9957.
  7. Ravi Shankar Yadav, Major G.S. Tripathi, Bramha P. Pandey, “Impact of ETL/Absorber Interface layer on Perovskite (CH3NH3PbX3, X: I, Br, Cl) Solar Cell, Nano Trends: A Journal of Nanotechnology and Its Applications Volume 21, Issue 2, ISSN: 0973-418X.
  8. S. Yang, J. H. Noh, N. J. Jeon, Y. C. Kim, S. Ryu, J. Seo and S. I. Seok, “High-performance photovoltaic perovskite layers fabricated through intra molecular exchange,” Science 348, 1234, 2015.
  9. Yu Miyazawa, Masashi Ikegami, Hsin-Wei Chen, Takeshi Ohshima, Mitsuru Imaizumi, Kazuyuki Hirose, Tsutomu Miyasaka, “Tolerance of Perovskite Solar Cell to High-Energy Particle Irradiations in Space Environment,” April 27, Miyazawa et al., Science 2, 148–155, 2018.
  10. Song Li, Yong-Li Cao, Wen-Hua Li , Zhi-Shan Bo, “A brief review of hole transporting materials commonly used in perovskite solar cells”, Rare Met. (2021) 40(10):2712–2729.
  11. Nandi Wu, Yiliang Wu, Daniel Walter, Heping Shen, The Duong, Dale Grant, Chog Barugkin, Xiao Fu, Jun Peng, Thomas White, Kylie Catchpole, and Klaus Weber. “Identifying the Cause of Voltage and Fill Factor Losses in Perovskite Solar Cells by Using Luminescence Measurements,” DOI: 10.1002 /ente201700374.
  12. Farhana Anwar, Rafee Mahbub, Sakin Sarwar Satter, and Saeed Mahmud Ullah, “Effect of Different HTM Layers and Electrical Parameters on ZnO Nanorod-Based Lead-Free Perovskite Solar Cell for High-Efficiency Performance,” International Journal of Photo energy, Volume 2017, Article ID 9846310, 2017.
  13. Syed Zulqarnain Haider, Hafeez Anwar, Mingqing Wang, “A comprehensive device modeling of Perovskite solar cell with inorganic copper iodide as holetransport material,” Sci. Technol. 33, 0 35001 (12pp), 2018.
  14. Prasanth kumar and Giri babu, 2016. “Recent advances in perovskite-based solar cells”. Sci., 111 1173–81.
  15. masuko, M. shigematsu, T. hashiguchi, D. fujishima, M. kai, N. yoshimura, T. yamaguchi, Y. ychihashi, T. Yamanishi, T. Takahama, M. Taguchi, E. Maruyama, S. Okamoto, T. Mishima, N. Matsubara, T. Yamanishi, T. Takahama, M. Taguchi, E. Maruyama, and S. Okamoto, “Achievement of More Than 25% Conversion Efficiency with Crystalline Silicon Heterojunction Solar Cell,” IEEE Journal of Photovoltaic Vol.4, Issue6, pp. 1433–1435, 2016.
  16. Wehrenfennig, G.E. Eperon, M.B. Johnston, H.J. Snaith, L.M. Herz, 2014. “High Charge Carrier Mobilities and Lifetimes in Organolead Tri halide Perovskite”. Journal of Advanced Materials, Vol. 26 , pp. 1584-1589.
  17. Bottaro and Moscowitz, “Current photovoltaic technology: current progress and future prospects,” 1997, MIT-EL77-041W.
Regular Issue Subscription Review Article
Volume 12
Issue 01
Received 20/01/2025
Accepted 30/01/2025
Published 08/02/2025
121