Dynamic Simulation of Load-Responsive Vapor Compression Refrigeration Systems

Year : 2025 | Volume : 12 | Issue : 02 | Page : 32 37
    By

    Amit Shishodia,

  1. Student, Department of Mechanical Engineering, Noida International University, Uttar Pradesh, India

Abstract

Because of their dependable operation and effectiveness, vapor compression refrigeration systems, or vapor compression refrigeration (VCRS), have become popular in commercial, industrial, and residential settings. However, under different thermal loads, classic vapor compression refrigeration (VCR) systems may perform less well in that they are usually built for steady-state conditions and run at consistent speeds. In order to improve a load-responsive VCR system’s flexibility, energy efficiency, and response to changing cooling demands, this study focuses on the dynamical modeling of the system. In order to simulate the dynamics of the system in real time under various load situations, a detailed dynamic model of a single-stage compression vapor cycle was created in this work using MATLAB/Simulink. In addition to dynamic representations of refrigerant qualities, mass flow rates, and heat transfer characteristics, the model includes essential parts involving a thermostatic expansion valve, condenser, evaporator, and variable-speed compressor. In order to adjust compressor speed in response to real-time cooling load needs, a proportional integral derivative (PID) controller was implemented. According to simulation data, the capacity-responsive VCR system performs noticeably better than fixed-speed systems, particularly when there is a partial load. Under dynamic load profiles, the system produced up to 18% energy savings, decreased compressor cycling, and maintained a more consistent evaporator temperature. Furthermore, greater use of compression work and less irreversibility in heat exchange mechanisms led to increased second law efficiency, according to energy analysis. The results highlight how dynamic simulation may be a useful tool for improving component selection and control techniques in current refrigeration system designs. This research enables the creation of intelligent, demand-adaptive cooling systems for environmentally friendly power applications in addition to advancing energy-efficient Heating, Ventilation, Air Conditioning, and Refrigeration (HVACR) technology. Alternative refrigerants and hybrid system topologies will be explored and experimentally validated in future studies.

Keywords: Vapor compression refrigeration (VCRS), proportional integrated derivative, coefficient of performance (COP), compressor cycling frequency, expansion valve

[This article belongs to Journal of Refrigeration, Air conditioning, Heating and ventilation ]

How to cite this article:
Amit Shishodia. Dynamic Simulation of Load-Responsive Vapor Compression Refrigeration Systems. Journal of Refrigeration, Air conditioning, Heating and ventilation. 2025; 12(02):32-37.
How to cite this URL:
Amit Shishodia. Dynamic Simulation of Load-Responsive Vapor Compression Refrigeration Systems. Journal of Refrigeration, Air conditioning, Heating and ventilation. 2025; 12(02):32-37. Available from: https://journals.stmjournals.com/jorachv/article=2025/view=228448


References

  1. Kim SW, Kim YI. Performance prediction of a water-cooled centrifugal chiller in standard temperature conditions using in-situ measurement data. Sustainability. 2025;17:2196. doi:10.3390/
  2. Schurt LC, Hermes CJL, Neto AT. A model-driven multivariable controller for vapor compression refrigeration systems. Int J Refrig. 2009;32:1672–82. doi:10.1016/j.ijrefrig.2009.04.004.
  3. Reddy TA, Andersen KK. An evaluation of classical steady-state off-line linear parameter estimation methods applied to chiller performance data. HVAC&R Res. 2002;8:101–24. doi:10.1080/10789669.2002.10391291.
  4. Lee DB, Jeong SK. State equation modeling for the optimum control of the refrigeration cycle. In: Proceedings of the Society of Air-Conditioning and Refrigerating Engineers of Korea Winter Conference; 2012 Nov; Pyeongchang, South Korea. p. 424–7.
  5. Yik FWH, Lam VKC. Chiller models for plant design studies. Build Serv Eng Res Technol. 1998;19:233–41. doi:10.1177/014362449801900407.
  6. Liu PL, Chuang BS, Lee WS, Yeh PL. An analytical solution of the optimal chillers operation problems based on ASHRAE guideline 14. J Build Eng. 2022;46:103800. doi:10.1016/j.jobe.2021.
  7. Kim YI, Jang YS, Sin YG, Baek YJ. In-situ performance analysis of centrifugal chiller according to varying conditions of chilled and cooling water. Trans Korean Soc Mech Eng B. 2002;26:482–90. doi:10.3795/KSME-B.2002.26.3.482.
  8. Sreedharan P, Haves P. Comparison of chiller models for use in model-based fault detection. Berkeley (CA): Lawrence Berkeley National Laboratory; 2001. Report No.: LBNL-48149.
  9. Chaerun Nisa EC, Kuan YD. Comparative assessment to predict and forecast water-cooled chiller power consumption using machine learning and deep learning algorithms. Sustainability. 2021;13:744. doi:10.3390/su13020744.
  10. Iguchi K, Nakayama M, Akisawa A. Method for estimating optimum cycle time based on adsorption chiller parameters. Int J Refrig. 2019;105:66–71. doi:10.1016/j.ijrefrig.2018.10.011.
Regular Issue Subscription Original Research
Volume 12
Issue 02
Received 26/07/2025
Accepted 01/08/2025
Published 08/08/2025
Publication Time 13 Days
34


My IP

PlumX Metrics