This is an unedited manuscript accepted for publication and provided as an Article in Press for early access at the author’s request. The article will undergo copyediting, typesetting, and galley proof review before final publication. Please be aware that errors may be identified during production that could affect the content. All legal disclaimers of the journal apply.
Puja Singh,
S.V.A.R Sastry,
- Research Scholar, Department of Chemical Engineering, Harcourt Butler Technical University, Uttar Pradesh, India
- Professor, Department of Chemical Engineering, Harcourt Butler Technical University, Uttar Pradesh, India
Abstract
A polymer precursor approach for creating zinc oxide (ZnO) nanoparticles with regulated size and shape is described in this work. By stabilising and capping particles, the polymer-assisted pathway efficiently reduces particle agglomeration while facilitating controlled nucleation and growth. The surface shape and dispersion of the produced ZnO nanoparticles were assessed using the scanning electron microscopy (SEM). When compared to traditional synthesis techniques, the addition of polymer greatly enhanced surface homogeneity and particle dispersion. By encouraging the breakdown of organic components and oxide production, thermal treatment of the polymer-metal precursor allowed the synthesis of well-defined ZnO nanoparticles. The suggested technique provides a straightforward, affordable, and scalable way to create high-quality ZnO nanoparticles, which makes it appropriate for use in sensing, catalysis, and other cutting-edge technologies. Furthermore, ZnO-based nanocomposites with improved mechanical, thermal, and functional properties can be created by successfully incorporating the synthesised ZnO nanoparticles into polymer matrices. These composites increase ZnO’s use in cutting-edge coatings, electronics, and energy-related systems. Furthermore, ZnO nanoparticles’ performance in composite systems is significantly influenced by their surface features and structural attributes. In order to achieve superior composite characteristics, the inclusion of nanoscale particles with increased dispersion improves interfacial bonding inside the polymer matrix. This study’s polymer precursor pathway naturally promotes uniform particle distribution, which lessens phase separation problems that are frequently seen with traditional mixing methods. Better control over particle matrix interactions is another benefit of this method, which can have a big impact on the final materials’ functional efficiency, thermal resistance, and mechanical durability.
Keywords: Zno nanoparticles, polymeric precursor method, ZnO-based nanocomposites, surface morphology, polymer nanoparticle integration.
Puja Singh, S.V.A.R Sastry. Synthesis of Zinc Oxide Nanoparticles through Polymeric Precursor Route and their integration into functional nanocomposites. Journal of Polymer & Composites. 2026; 14(03):-.
Puja Singh, S.V.A.R Sastry. Synthesis of Zinc Oxide Nanoparticles through Polymeric Precursor Route and their integration into functional nanocomposites. Journal of Polymer & Composites. 2026; 14(03):-. Available from: https://journals.stmjournals.com/jopc/article=2026/view=245118
References
1. Joudeh N, Linke D. Nanoparticle classification, physicochemical properties, characterization, and applications: a comprehensive review for biologists. J Nanobiotechnol. 2022;20(1):262.
2. Roduner E. Size matters: why nanomaterials are different. Chem Soc Rev.
2006;35(7):583–592.
3. Saeed M, Marwani HM, Shahzad U, Asiri AM, Rahman MM. Recent advances, challenges, and future perspectives of ZnO nanostructure materials towards energy applications. Chem Rec. 2024;24(1):e202300106.
4. Pal SL, Jana U, Manna PK, Mohanta GP, Manavalan R. Nanoparticle: an overview of preparation and characterization. J Appl Pharm Sci. 2011;1:228–234.
5. Raha S, Ahmaruzzaman M. ZnO nanostructured materials and their potential applications: progress, challenges and perspectives. Nanoscale Adv. 2022;4(8):1868– 1925.
6. Chen CY, Chen MW, Ke JJ, Lin CA, He JH. Surface effects on optical and electrical properties of ZnO nanostructures. Pure Appl Chem. 2010;82(11).
7. Jin C, Zhou J, Wu Z, Zhang JX. Doped zinc oxide-based piezoelectric devices for energy harvesting and sensing. Adv Energy Sustain Res. 2025;6(9):2500017.
8. Güell F, Galdámez-Martínez A, Martínez-Alanis PR, Catto AC, da Silva LF, Mastelaro VR, et al. ZnO-based nanomaterials approach for photocatalytic and sensing applications: recent progress and trends. Mater Adv. 2023;4(17):3685–3707.
9. Mimona MA, Kamal F, Ahmed MMS, Ahmed I, Islam MS, Rahman MK, et al. Advances and significance of nanowires in semiconductor applications. Nano LIFE. 2026;16(3):2530004.
10. Sheng CK, Alrababah YM. pH-induced wurtzite–zinc blende heterogeneous phase formation, optical properties tuning and thermal stability improvement of green synthesized CdS nanoparticles. Heliyon. 2023;9(5).
11. Jin Z, Wang AJ, Sun YR, Li J, Ma R, Ding Y. High selectivity and sensitivity gas sensors to n-butanol based on Ni-doped ultra-thin porous single-crystalline ZnO nanosheets. Sens Actuators A Phys. 2024;369:115115.
12. Singh P, Sastry SVAR. Engineering various morphologies of 2 dimensional nanomaterials for enhanced nanolubricant efficiency: a review. Trends Sci. 2025;22(7):9606.
13. Frey EJ, Im S, Bachmann AL, Genzer J, Dickey MD. Patterning of a high surface area liquid metal–carbon composite film using laser processing. Adv Funct Mater. 2024;34(31):2308574.
14. Raha S, Ahmaruzzaman M. ZnO nanostructured materials and their potential applications: progress, challenges and perspectives. Nanoscale Adv. 2022;4(8):1868– 1925.
15. Wang J, Ji H. Effect of preparation conditions on the properties of nano ZnO powders during ultrasonic assisted direct precipitation process. PLoS One. 2023;18(8):e0286765.
16. Song J, Huang H, Wang X, Shi W. Status and prospects of surface texturing: design, manufacturing and applications. Surf Sci Technol. 2023;1(1):21.
17. Faiza, Khattak A, Alahmadi AA, Ishida H, Ullah N. Improved PVC/ZnO nanocomposite insulation for high voltage and high temperature applications. Sci Rep. 2023;13(1):7235.
18. Nigam A, Varshney S, Singh S, Kumar U, Mishra N, Pawar SJ. Biosynthesis of zinc oxide nanoparticles using Ficus racemose leaf extract via microwave irradiation route: characterization and investigation of antibacterial efficacy. Adv Condens Matter Phys.
2025;2025(1):7996602.
19. Meena PL, Poswal K, Surela AK. Facile synthesis of ZnO nanoparticles for the effective photodegradation of malachite green dye in aqueous solution. Water Environ
J. 2022;36(3):513–524.
20. Tiwari M, Sastry SVAR, Kumar S. Green chemistry approach for synthesis of environmentally sustainable advanced polymeric nanoparticles. J Polym Compos. 2024;12(2).
21. Palanisamy, S., Kalimuthu, M., Azeez, A., Palaniappan, M., Dharmalingam, S., Nagarajan, R., & Santulli, C. (2022). Wear properties and post-moisture absorption mechanical behavior of kenaf/banana-fiber-reinforced epoxy composites. Fibers, 10(4), 32.
22. Aruchamy, K., Karuppusamy, M., Krishnakumar, S., Palanisamy, S., Jayamani, M., Sureshkumar, K., & Al-Farraj, S. A. (2025). Enhancement of Mechanical Properties of Hybrid Polymer Composites Using Palmyra Palm and Coconut Sheath Fibers: The Role of Tamarind Shell Powder. BioResources, 20(1).
23. Ayrilmis, N., Kanat, G., Yildiz Avsar, E., Palanisamy, S., & Ashori, A. (2025). Utilizing waste manhole covers and fibreboard as reinforcing fillers for thermoplastic composites. Journal of Reinforced Plastics and Composites, 44(17-18), 1108-1118.
24. Ramasubbu, R., Kayambu, A., Palanisamy, S., & Ayrilmis, N. (2024). Mechanical Properties of Epoxy Composites Reinforced with Areca catechu Fibers Containing Silicon Carbide. BioResources, 19(2).
Journal of Polymer & Composites
| Volume | 14 |
| 03 | |
| Received | 14/04/2026 |
| Accepted | 22/04/2026 |
| Published | 26/05/2026 |
| Publication Time | 42 Days |
Login
PlumX Metrics