Application-Driven Rule-Based Framework for Lubrication Failure Modes in Industrial Systems

Year : 2025 | Volume : 13 | Special Issue 06 | Page : 522 531
    By

    Shaikh Azharuddin Kutubuddin,

  • D.V. A. Rama Sastry,

  1. Research Scholar, Department of Mechanical Engineering, Koneru Lakshmaiah Education Foundation, Vaddeswaram, Guntur, Andhra Pradesh, India
  2. Associate Professor, Department of Mechanical Engineering, Koneru Lakshmaiah Education Foundation, Vaddeswaram, Guntur, Andhra Pradesh, India

Abstract

Modern lubricants increasingly rely on polymer-based composites, integrating synthetic base oils, polymer thickeners and solid additives like MoS₂ and PTFE for high-performance applications. These formulations not only enhance thermal and mechanical stability but also enable low-friction operation across diverse industrial conditions. Lubrication-related failures represent a critical cause of unplanned downtime and reduced reliability in industrial machinery. This paper presents an application-driven, rule-based framework designed to assess and mitigate lubrication failure modes in semi-solid and solid lubricants by linking operational parameters to lubricant properties and failure knowledge. The system integrates a curated database of solid and semi-solid lubricants, storing their key properties and knowledge base extracted from applications and case-studies related to industries such as mining equipment, steel mill rollers, etc. The framework maps known failure modes and recommended preventive strategies. By accepting input parameters such as operating temperature and mechanical load for application under consideration, the system evaluates the risk of failure using deterministic rules and property thresholds. It generates warnings for adverse conditions (e.g., thermal degradation or overloading) and recommends appropriate lubricants and maintenance actions. Unlike black-box predictive models, this approach emphasizes explainability and simplicity, offering a transparent decision-support tool that maintenance engineers can use with minimal technical overhead. Validated across multiple industrial scenarios, the framework demonstrates its effectiveness in identifying high-risk conditions, supporting condition-based decisions and reducing lubricant-related failures through proactive, rule-based insights.

Keywords: Polymer-based composites, Lubrication failure, Rule-based system, Condition-based decisions, Industrial scenarios.

[This article belongs to Special Issue under section in Journal of Polymer and Composites (jopc)]

How to cite this article:
Shaikh Azharuddin Kutubuddin, D.V. A. Rama Sastry. Application-Driven Rule-Based Framework for Lubrication Failure Modes in Industrial Systems. Journal of Polymer and Composites. 2025; 13(06):522-531.
How to cite this URL:
Shaikh Azharuddin Kutubuddin, D.V. A. Rama Sastry. Application-Driven Rule-Based Framework for Lubrication Failure Modes in Industrial Systems. Journal of Polymer and Composites. 2025; 13(06):522-531. Available from: https://journals.stmjournals.com/jopc/article=2025/view=230589


References

  1. Jardine AKS, Lin D, Banjevic D. A review on machinery diagnostics and prognostics implementing condition-based maintenance. Mech Syst Signal Process. 2006;20(7):1483–510. doi:10.1016/j.ymssp.2005.09.012.
  2. Prajapati A, Bechtel J, Ganesan S. Condition based maintenance: A survey. J Qual Maint Eng. 2012;18(4):384–400. doi:10.1108/13552511211281552.
  3. Mobley RK. An introduction to predictive maintenance. 2nd ed. Oxford: Butterworth-Heinemann; 2002.
  4. Lee J, Ni J, Djurdjanovic D, Qiu H, Liao H. Intelligent prognostics tools and e-maintenance. Comput Ind. 2006;57(6):476–89. doi:10.1016/j.compind.2006.02.014.
  5. Xu X, Yan X, Sheng C, Yuan C, Yang J. A belief rule-based expert system for fault diagnosis of marine diesel engines. IEEE Trans Syst Man Cybern Syst. 2020;50(2):656–72. doi:10.1109/TSMC.2017.2759026.
  6. De Carlo F, Borgia O, Tucci M, Rapaccini M. A rule-based expert system for maintenance as a competitive advantage. In: 2009 Annual Reliability and Maintainability Symposium. IEEE; 2009. p. 448–53. doi:10.1109/RAMS.2009.4914718.
  7. Holmberg K, Erdemir A. Influence of tribology on global energy consumption, costs and emissions. Friction. 2017;5(3):263–84. doi:10.1007/s40544-017-0183-5.
  8. Wakiru JM, Pintelon L, Muchiri PN, Chemweno P. A review on lubricant condition monitoring information analysis for maintenance decision support. Mech Syst Signal Process. 2019;118:108–32. doi:10.1016/j.ymssp.2018.08.039.
  9. Cann PM. Grease lubrication of rolling element bearings—Role of the grease thickener. Lubr Sci. 2007;19(3):183–96. doi:10.1002/ls.39.
  10. Dou D, Yang J, Liu J, Zhao Y. A rule-based intelligent method for fault diagnosis of rotating machinery. Knowl-Based Syst. 2012;36:1–8. doi:10.1016/j.knosys.2012.05.013.
  11. Werbinska-Wojciechowska S, Rogowski R. Proactive maintenance of pump systems operating in the mining industry—A systematic review. Sensors. 2025;25(8):2365. doi:10.3390/s25082365.
  12. Cen H, Lugt PM. Film thickness in a grease lubricated ball bearing. Tribol Int. 2019;134:26–35. doi:10.1016/j.triboint.2019.01.032.
  13. Osara JA, Bryant MD. Thermodynamics of grease degradation. Tribol Int. 2019;137:433–45. doi:10.1016/j.triboint.2019.05.020.
  14. Shekhawat D, Jain A, Vashishtha N, Singh AP, Kumar R. Tribological performance comparison of lubricating greases for electric vehicle bearings. Lubricants. 2025;13(3):108. doi:10.3390/lubricants13030108.
  15. Peng H, Zhang H, Shangguan L, Fan Y. Review of tribological failure analysis and lubrication technology research of wind power bearings. Polymers (Basel). 2022;14(15):3041. doi:10.3390/polym14153041.
  16. Morgan I, Liu H, Tormos B, Sala A. Detection and diagnosis of incipient faults in heavy-duty diesel engines. IEEE Trans Ind Electron. 2010;57(10):3522–32. doi:10.1109/TIE.2009.2038337.
  17. Macián V, Tormos B, Sala A, Ramírez JC. Fuzzy logic-based expert system for diesel engine oil analysis diagnosis. Insight Non-Destr Test Cond Monit. 2006;48(8):462–9. doi:10.1784/insi.2006.48.8.462.
  18. Qian Y, Xu L, Li X, Lin L, Kraslawski A. LUBRES: An expert system development and implementation for real-time fault diagnosis of a lubricating oil refining process. Expert Syst Appl. 2008;35(3):1252–66. doi:10.1016/j.eswa.2007.07.061.
  19. Liu B, Gao Z, Lu B, Dong H, An Z. Deep learning-based remaining useful life estimation of bearings with time-frequency information. Sensors (Basel). 2022;22(19):7402. doi:10.3390/s22197402.
  20. Vafaei S, Fischer D, Jopen M, Jacobs G, König F, Weberskirch R. Investigation of tribological behavior of lubricating greases composed of different bio-based polymer thickeners. Lubricants. 2021;9(8):80. doi:10.3390/lubricants9080080.
  21. Wang H, He Z, Xiong L, Qian L, Li L, Long Q. Investigating the anti-wear behavior of polyalphaolefin oil with methyl silicon resin using advanced analytical techniques. Lubricants. 2024;12(12):416. doi:10.3390/lubricants12120416.
  22. Bagi SD, Aswath PB. Mechanism of friction and wear in MoS₂ and ZDDP/F-PTFE greases under spectrum loading conditions. Lubricants. 2015;3(4):687–711. doi:10.3390/lubricants3040687.
  23. Zhen J, Han Y, Wang H, Jiang Z, Wang L, Huang Y, et al. High temperature friction and wear behavior of PTFE/MoS₂ composites. Lubricants. 2023;11(8):312. doi:10.3390/lubricants11080312.
  24. Hu H, He Y, Wang Q, Tao L. Preparation and characterization of the polyimide–MoS₂/PTFE composite with high strength and self-adaptive lubricating performance in air and vacuum. ACS Appl Polym Mater. 2023;5(8):6516–28. doi:10.1021/acsapm.3c01084.
Special Issue Subscription Original Research
Volume 13
Special Issue 06
Received 30/05/2025
Accepted 19/07/2025
Published 16/09/2025
Publication Time 109 Days
114

Login


My IP

PlumX Metrics