Comparative Study of Mechanical Properties of Sisal/Epoxy, Fiber/Glass Epoxy, Sisal/Fiber Glass/Epoxy Composites

Year : 2025 | Volume : 13 | Special Issue 03 | Page : 1-11
    By

    Rudresh M.,

  • Prathik Jain S.,

  • Dinamani Muthaiah,

  • Bhargav Yadav L.,

  • Diwakar S.S.,

  • Sumantha Upadhyaya K.S.,

  • Yogesh V.,

  1. Associate Professor, Department of Robotics and Artificial Intelligence Engineering, Dayananda Sagar College of Engineering, Bengaluru, Karnataka, India
  2. Associate Professor, Department of Aeronautical Engineering, Dayananda Sagar College of Engineering, Bengaluru, Karnataka, India
  3. Associate Professor, Department of Chemistry, Dayananda Sagar College of Engineering, Bengaluru, Karnataka, India
  4. Student, Department of Aeronautical Engineering, Dayananda Sagar College of Engineering, Bengaluru, Karnataka, India
  5. Student, Department of Aeronautical Engineering, Dayananda Sagar College of Engineering, Bengaluru, Karnataka,
  6. Student, Department of Aeronautical Engineering, Dayananda Sagar College of Engineering, Bengaluru, Karnataka, India
  7. Student, Department of Aeronautical Engineering, Dayananda Sagar College of Engineering, Bengaluru, Karnataka, India

Abstract

document.addEventListener(‘DOMContentLoaded’,function(){frmFrontForm.scrollToID(‘frm_container_abs_191218’);});Edit Abstract & Keyword

The rate at which non-renewable resources are consumed increases, the research of using eco-friendly and sustainable materials has been in the spotlight lately. The companies from different industries are trying to find replacements for traditional synthetic materials to limit their environmental impact and promote sustainable eco-friendly initiatives. One such approach is the usage of natural fiber polymer composites as it provides a biodegradable and renewable structural alternative over traditional synthetic reinforcements. This paper focuses on the bio-based composites made from natural fibers such as sisal, silk, and areca nut, and examines their development and grew the interest in industrial applications of these substitutes. The mechanical properties measured using tensile and flexural tests. FTIR was used for structural analysis. The results of this study suggest that bio-based natural fiber reinforced composites can reasonably be expected to possess adequate mechanical, strength, and durability and therefore can be considered for application in automotive, aerospace, or construction industries. This research plays a crucial part in advancing the field of green composites, demonstrating that natural fiber reinforcements can be successfully integrated into polymer matrices without compromising performance. By promoting the use of sustainable materials, this study encourages industries to adopt greener solutions, ultimately contributing to environmental conservation and reducing dependency on non-renewable resources. During in our project period we are laminating the fibre matrix using the sisal fibre and epoxy, glass fibre and epoxy and finally combination of sisal-glass fibre and epoxy. We have also compared the mechanical properties with all prepared laminates by tensile and flexural test.

Keywords: Tensile test, flexural test, fourier transform infrared spectroscopy (FTIR), bio composites, eco-friendly materials

[This article belongs to Special Issue under section in Journal of Polymer and Composites (jopc)]

How to cite this article:
Rudresh M., Prathik Jain S., Dinamani Muthaiah, Bhargav Yadav L., Diwakar S.S., Sumantha Upadhyaya K.S., Yogesh V.. Comparative Study of Mechanical Properties of Sisal/Epoxy, Fiber/Glass Epoxy, Sisal/Fiber Glass/Epoxy Composites. Journal of Polymer and Composites. 2025; 13(03):1-11.
How to cite this URL:
Rudresh M., Prathik Jain S., Dinamani Muthaiah, Bhargav Yadav L., Diwakar S.S., Sumantha Upadhyaya K.S., Yogesh V.. Comparative Study of Mechanical Properties of Sisal/Epoxy, Fiber/Glass Epoxy, Sisal/Fiber Glass/Epoxy Composites. Journal of Polymer and Composites. 2025; 13(03):1-11. Available from: https://journals.stmjournals.com/jopc/article=2025/view=0


Browse Figures

document.addEventListener(‘DOMContentLoaded’,function(){frmFrontForm.scrollToID(‘frm_container_ref_191218’);});Edit

References

  1. Sankarathil AJ, Raja R, Vijay SJ, et al. Structural, thermal and elemental investigations in epoxy polymer composites reinforced with NaOH-treated short areca nut fibers. Trans Indian Inst Met. 2023;76(9):2525-33p.https://doi.org/10.1007/s12666-023-02991-5
  2. Sahai RSN, Biswas D, Yadav MD, et al. Effect of alkali and silane treatment on water absorption and mechanical properties of sisal fiber reinforced polyester composites. Metallurgical and Materials Engineering. 2022;1;28(4):641-56p.https://doi.org/10.63278/mme.v28i4.864
  3. Gupta MK, Srivastava RK. Mechanical, thermal and water absorption properties of hybrid sisal/jute fibre reinforced polymer composite. Indian J Eng Mater Sci. 2016;23(4):231-8p.
  4. Kebede M. Fabrication and mechanical property characterization of sisal fiber reinforced epoxy resin composite material for automotive body application [Internet]. 2015 [cited 2024 Nov 20]. https://rgdoi.net/10.13140/RG.2.2.16765.82407
  5. Tamilvendan D, Banupriya N, Udayakumar KA, et al. Effect of moisture absorption on mechanical properties of jute-sisal reinforced epoxy composite – An experimental investigation. Int Adv Res J Sci Eng Technol. 2021;8(12):258-65p.https://doi: 10.17148/IARJSET.2021.81245
  6. Maya MG, George SC, Jose T, et al. Mechanical properties of short sisal fibre reinforced phenol formaldehyde eco-friendly composites. Polymers from Renewable Resources. 2017;8(1):27-42p.https://doi.org/10.1177/204124791700800103.
  7. Gowda BMU, Ravindra HV, Jain SP, et al. Comparative study of surface roughness and cylindricity of aluminium silicon nitride material using MRA GMDH & pattern recognition technique in drilling. Procedia Materials Science. 2014;6:1770-9p. https://doi.org/10.1016/j.mspro.2014.07.207
  8. Mustafa HM, Dauda B. Physical and mechanical properties of alkali modified Nigerian sisal fibres. Int J Sci Eng Res. 2015;6(3):401-12p.
  9. Ferede E, Muhammed A, Kassa A, et al. Fabrication and characterization of recycled polyethylene terephthalate composites reinforced with sisal fibre and wood sawdust. Textile & Leather Review. 2024;7:493-516p.https://doi.org/10.31881/TLR.2023.221
  10. Gupta MK, Srivastava RK, Kumar S, et al. Mechanical and water absorption properties of hybrid sisal/glass fibre reinforced epoxy composite. American Journal of Polymer Science & Engineering 2015;3(2):208-19p.
  11. Tesfay AG, Kahsay MB, Kumar PSS. Effect of carbon and glass fillers on tensile and impact strength, water absorption, and degradation properties of sisal/polyester composites. Journal of Natural Fibers. 2023;20(2):2202886.https://doi.org/10.1080/15440478.2023.2202886
  12. Ferreira CR, Araújo AM, Fonseca JDCM, et al. Mechanical properties of sisal/ fiberglass reinforced composites. Int J Adv Eng Res & Sci. 2020;7(3):106-10p.https://dx.doi.org/10.22161/ijaers.73.17
  13. Kamarudin SH, Mohd Basri M.S, Rayung M, et al. A Review on Natural Fiber Reinforced Polymer Composites (NFRPC) for Sustainable Industrial Applications. 2022;14(17):3698.https://doi.org/10.3390/polym14173698
  14. Tirupathi KJS, Hiremath SS. Investigation of Mechanical Characterisation and Thermal Performance of Hybrid Natural Fiber Composites for Automotive Applications. Fibers Polym. 2022;(23):3505–15p. https://doi.org/10.1007/s12221-022-4576-3
  15. Neto JSS, de Queiroz HFM, Aguiar RAA, et al. A Review on the Thermal Characterisation of Natural and Hybrid Fiber Composites. 2021;13(24):4425. https://doi.org/10.3390/polym13244425
  16. Mohammad KH, Indah W. Natural Fiber Reinforced Polymer in Automotive Application: A Systematic Literature Review. Phys.: Conf. Ser. 2021; 1808, 012015. DOI 10.1088/1742-6596/1808/1/012015
  17. Palanisamy S, Kalimuthu M, Azeez A, et al. Wear properties and post-moisture absorption mechanical behavior of kenaf/banana-fiber-reinforced epoxy composites. 2022;10(4):32. https://doi.org/10.3390/fib10040032
  18. Palanisamy S, Kalimuthu M, Azeez A, et al. Tailoring epoxy composites with Acacia caesia bark fibers: Evaluating the effects of fiber amount and length on material characteristics. Fibers. 2023;11(7):63. https://doi.org/10.3390/fib11070063
  19. Palanisamy S, Kalimuthu M, Palaniappan M, et al. Characterization of Acacia caesia bark fibers (ACBFs). Journal of Natural Fibers. 2021;19(15):10241-52. https://doi.org/10.1080/15440478.2021.1993493
  20. Palanisamy S, Mayandi K, Palaniappan M, et al. Mechanical properties of Phormium tenax-reinforced natural rubber composites. Fibers. 2021;9(2):11. https://doi.org/10.3390/fib9020011
  21. Karthik A, Bhuvaneshwaran M, Senthil Kumar MS, et al. A review on surface modification of plant fibers for enhancing properties of biocomposites. ChemistrySelect. 2024;9(21) https://doi.org/10.1002/slct.202400650
  22. Palaniappan, M., Palanisamy, S., Khan, R. et al. Synthesis and suitability characterization of microcrystalline cellulose from Citrus x sinensis sweet orange peel fruit waste-based biomass for polymer composite applications. J Polym Res. 2024;31:105. https://doi.org/10.1007/s10965-024-03946-0
Special Issue Subscription Original Research
Volume 13
Special Issue 03
Received 12/02/2025
Accepted 02/04/2025
Published 07/05/2025
Publication Time 84 Days
40

[last_name]

My IP

PlumX Metrics