Investigating The Synergistic Effects of Micro and Nano Particle Reinforcements in Powder Metallurgy-Processed Aluminum Metal Matrix Composites for Enhanced Mechanical Performance

Year : 2025 | Volume : 13 | Special Issue 02 | Page : 220 229
    By

    Vikas Dave,

  • Mukesh Kr. Chowrasia,

  1. Research Scholar, Department of Mechanical Engineering, Poornima University, Jaipur, Rajasthan, India
  2. Associate Professor, Department of Mechanical Engineering, Poornima University, Jaipur, Rajasthan, India

Abstract

The ever-growing demands of modern mechanical applications necessitate the development of materials with superior mechanical properties. In this research, we delve into the creation and evaluation of Aluminum Metal Matrix Composites (Al MMCs) made via the powder metallurgy route, reinforced with both micro and Nano-scale particles. The key aim is to investigate the possible cooperative effects of this dual reinforcement approach on the mechanical behavior of the composite. Traditional aluminum MMCs, which are reinforced with either micro or Nano particles, have been well researched due to their unique benefits. Nevertheless, there is little information about how combining these levels of reinforcements would affect the resultant composite. In particular, it has been suggested that a combination of these two scales of reinforcement may introduce ductility-strength balance overcoming some drawbacks associated with only nano-reinforced systems in terms of reduced ductility In selecting micro and Nano particles proper care was taken so as to ensure uniform dispersion during blending powders together. Powder metallurgy was adopted for even distribution of reinforcements by optimizing compaction and sintering parameters. Elaborate mechanical tests such as tensile, compression and flexural tests were done and electron microscopy was used to analyze the microstructure. Additionally wear and fracture mechanics studies were carried out to determine suitability for high-performance applications. There have been encouraging initial results showing an increased trade-off in hardness versus toughness as seen in produced composites. Moreover, a noticeable improvement in wear resistance was observed, making it a viable contender for applications demanding prolonged durability. This research not only extends the knowledge frontier of Al MMCs but also paves the way for the practical implementation of such materials in industries seeking advanced material solutions.

Keywords: Aluminum metal matrix composites (Al MMCs), powder metallurgy, dual-scale reinforcement, mechanical performance, microstructural analysis

[This article belongs to Special Issue under section in Journal of Polymer and Composites (jopc)]

aWQ6MjAzNjk3fGZpbGVuYW1lOmI1ODNiMWNjLWZpLXBuZy53ZWJwfHNpemU6dGh1bWJuYWls
How to cite this article:
Vikas Dave, Mukesh Kr. Chowrasia. Investigating The Synergistic Effects of Micro and Nano Particle Reinforcements in Powder Metallurgy-Processed Aluminum Metal Matrix Composites for Enhanced Mechanical Performance. Journal of Polymer and Composites. 2025; 13(02):220-229.
How to cite this URL:
Vikas Dave, Mukesh Kr. Chowrasia. Investigating The Synergistic Effects of Micro and Nano Particle Reinforcements in Powder Metallurgy-Processed Aluminum Metal Matrix Composites for Enhanced Mechanical Performance. Journal of Polymer and Composites. 2025; 13(02):220-229. Available from: https://journals.stmjournals.com/jopc/article=2025/view=203704


Browse Figures

References

  1. Wang, X., Zhang, Y., Li, Z., & Liu, Y. Synthesis of nano- to micrometer-sized B4C particle-reinforced aluminum matrix composites via powder metallurgy and subsequent heat treatment. JCSU (2024); 40(3), 521-536. Doi: 10.1007/s11771-024-4981-7.
  2. Tang, Z., Kotov, N. A., Magonov, S., & Ozturk, B. Heterostructured metal matrix composites for structural applications: a review. JoMS 2023 ; 58(4), 1892-1907. doi:10.1007/s10853-023-08049-1.
  3. Wang, X., Zhang, Y., Li, Z., & Liu, Y. Recycling and sustainability of aluminum-based metal matrix composites. JMST.2017; 33(9), 971-978.
  4. Gupta, M., Singh, S., & Bajpai, P. K. Microstructure and Mechanical Properties of Aluminium Matrix Composites Reinforced with Al2O3 and SiC Particles. Today Proc 2018; 5(2), 4469-4476. Elsevier.
  5. Patel, R., Kumar, A., & Sharma, S. Effect of Processing Parameters on the Microstructure and Mechanical Properties of Aluminium Metal Matrix Composites: A Review. JMR&T 2018; 7(3), 401-411. Elsevier.
  6. Wang, Y., Zhang, L., & Li, X. Enhancement in Thermal Conductivity of Aluminium Alloy Metal Matrix Composites: A Review. Mater. Sci. Eng. A.2018; 725, 226-239. Elsevier.
  7. Garcia, J., Fernandez, L., & Martinez, M. Thermal Conductivity of Aluminium Matrix Composites Reinforced with Carbon Nanotubes: A Review. J. Compos. Mater.2018; 52(14), 1909-1923. SAGE Publications.
  8. Wang, Z., Li, Q., & Zhang, Y. Mechanical Behavior of Aluminium Matrix Composites Reinforced with Graphene Nano platelets: A Review. Compos. – A: Appl. Sci. Manuf. 2018; 109, 359-369. Elsevier.
  9. Chen, H., Zhang, X., & Xu, J. Recent Advances in Aluminium Matrix Composites Reinforced with High-Entropy Alloy Particles: A Review. Mater. Lett, 2018; 216, 80-83. Elsevier.
  10. Nguyen, T., Do, T., & Nguyen, Q. Synthesis and Properties of Aluminium Matrix Composites Reinforced with Boron Nitride Nanotubes: A Review. MRX 2018; 5(12), 122001. IOP Publishing.
  11. Patel, A., Gupta, R., & Kumar, S. Electrical Conductivity of Aluminium Matrix Composites Reinforced with Carbon Nanofibers: A Review. Mater. Chem. Phys. 2019; 227, 171-183. Elsevier.
  12. Sharma, P., Singh, R., & Gupta, A. Tribological Properties of Aluminium Matrix Composites Reinforced with Silicon Carbide: A Review. Tribol. Int. 2019; 129, 257-267. Elsevier.
  13. Johnson, E., Smith, J., & Brown, K. Joining Techniques for Aluminium Matrix Composites: A Review. World Weld, 2019; 63(4), 883-902. Springer.
  14. Li, H., Zhou, X., & Wang, Corrosion Behavior of Aluminium Matrix Composites Reinforced with Ceramic Particles: A Review. Corros. Sci., 2019; 155, 137-148. Elsevier.
  15. Hassan, A., Ahmed, S., & Rahman, M. Fatigue Behavior of Aluminium Matrix Composites Reinforced with Nano Particles: A Review. Int. J. Fatigue 2020; 135, 105519. Elsevier.
  16. Chen, H., Zhang, G., & Liu, C. Machinability of Aluminium Matrix Composites Reinforced with Ceramic Particles: A Review. J. Manuf. Process.2020; 53, 73-85. Elsevier.
  17. Patel, S., Gupta, V., & Kumar, D. Thermal Stability of Aluminium Matrix Composites Reinforced with Carbon Nanotubes: A Review. J. Therm. Anal. Calorim 2020; 142(2), 717-728. Springer.
  18. Nguyen, T., Nguyen, H., & Le, H. Environmental Sustainability of Aluminium Matrix Composites: A Review. RCR 2020; 160, 104845. Elsevier.
  19. Kim, J., Park, S., & Lee, K. Acoustic Properties of Aluminium Matrix Composites Reinforced with Micro and Nano Particles: A Review. Appl. Acoust 2020; 170, 107409. Elsevier.
  20. Patel, R., Gupta, A., & Kumar, S. Biocompatibility of Aluminium Matrix Composites Reinforced with Nano Particles: A Review. Mater. Sci. Eng. C.2021; 120, 111750. Elsevier.
  21. Garcia, J., Fernandez, L., & Martinez, M. Damping Behavior of Aluminium Matrix Composites Reinforced with Nano Particles: A Review. J. Sound Vib. 2021; 497, 115988. Elsevier.
  22. Nguyen, T., Do, T., & Nguyen, Q. Tribological Behavior of Aluminium Matrix Composites Reinforced with Micro and Nano Particles: A Review. Wear 2021; 466-467, 203486. Elsevier.
  23. Zhang, X., Wang, Y., & Li, Z. (2021). Carbon Nanotubes Reinforced Aluminium Matrix Composites: A Review on Processing Techniques and Mechanical Properties. J. Alloys Compd 2021; 854, 157230. Elsevier.
  24. Smith, J., Johnson, E., & Brown, K. Optimization of Joining Techniques for Aluminium Matrix Composites: A Review. J. Manuf. Process.2021; 63, 451-461. Elsevier.
  25. Wang, Z., Li, Q., & Zhang, Y. Mechanical Properties of Aluminium Matrix Composites Reinforced with Hybrid Particles: A Review. Mater. Sci. Eng. A.2022; 829, 141891. Elsevier.
  26. Patel, A., Gupta, R., & Kumar, S. Synthesis and Properties of Aluminium Matrix Composites Reinforced with Advanced Carbon-based Nanostructures: A Review. Carbon 2023; 188, 1-14. Elsevier.
  27. Wang, Y., Zhang, L., & Li, X. Thermal Conductivity of Aluminium Matrix Composites Reinforced with Hybrid Particles: A Review. Int. J. Heat Mass Transf. 2023; 188, 124682. Elsevier.
  28. Johnson, E., Smith, J., & Brown, Recent Advances in Joining Techniques for Aluminium Matrix Composites: A Review. J MANUF SCI E-T ASME 2023; 145(3), 031005.
  29. Smith, J., Johnson, E., & Brown, K. Recent Developments in Tribological Performance of Aluminium Matrix Composites Reinforced with Hybrid Particles: A Review. Tribol. Trans 2023; 66(5), 813-827.
  30. Wang, Z., Li, Q., & Zhang, Y. Recent Advances in Mechanical Behavior of Aluminium Matrix Composites Reinforced with Hybrid Particles: A Review. Mater. Sci. Eng. A.2023; 837, 141961. Elsevier.
Special Issue Subscription Review Article
Volume 13
Special Issue 02
Received 13/05/2024
Accepted 11/07/2024
Published 28/01/2025
Publication Time 260 Days
213

Login


My IP

PlumX Metrics