Advancements In Metal-Fiber Composites for Aerospace and Defense Applications: A Comprehensive Review

Year : 2025 | Volume : 13 | Special Issue 02 | Page : 96 108
    By

    S. Sreemathi,

  • G. Jims John Wessley,

  1. Associate Professor, Department of Aerospace Engineering, Karunya Institute of Technology and Sciences, Coimbatore, Tamil Nadu, India
  2. Associate Professor, Department of Aerospace Engineering, Karunya Institute of Technology and Sciences, Coimbatore, Tamil Nadu, India

Abstract

This paper provides a comprehensive review of fiber-reinforced composites, focusing specifically on the utilization of metal-fiber composites in aerospace such as metal surface preparation prior to bonding, resin selection, and detailed examination of mechanical testing and impact studies. The significance of metal surface preparation for establishing strong bonding, which is a crucial initial step in composite fabrication, is discussed. Additionally, the prevalent use of epoxy resins and their importance in bonding metal fibers is highlighted. The mechanical strength of these composites is thoroughly assessed through a combination of tensile and flexural tests, providing insight into their structural integrity. The paper also provides a concise overview of low and high-velocity impact studies conducted on metal-fiber composites, offering valuable insights into material response under various impact conditions and real-world performance. Furthermore, it briefly explores the application of metal-fiber composites in armor and aerospace, emphasizing their role in achieving weight reduction while significantly improving stiffness and impact strength. This research paper presents a detailed exploration of metal-fiber composites in aerospace and defense applications.

Keywords: Fibre-reinforced composites, metal-fiber composite, impact strength, sand blasting, tensile, flexural

[This article belongs to Special Issue under section in Journal of Polymer and Composites (jopc)]

How to cite this article:
S. Sreemathi, G. Jims John Wessley. Advancements In Metal-Fiber Composites for Aerospace and Defense Applications: A Comprehensive Review. Journal of Polymer and Composites. 2025; 13(02):96-108.
How to cite this URL:
S. Sreemathi, G. Jims John Wessley. Advancements In Metal-Fiber Composites for Aerospace and Defense Applications: A Comprehensive Review. Journal of Polymer and Composites. 2025; 13(02):96-108. Available from: https://journals.stmjournals.com/jopc/article=2025/view=203576


Browse Figures

References

  1. Campbell FC. Structural composite materials. Materials Park, Ohio: Asm International; 2010.
  2. Advanced Materials by Design. 1988.
  3. Kazemi ME, Shanmugam L, Yang L, Yang J. A review on the hybrid titanium composite laminates (HTCLs) with focuses on surface treatments, fabrications, and mechanical properties. Composites Part A-applied Science and Manufacturing. 2020 Jan 1;128:105679–9.
  4. Bhuvaneshwaran Mylsamy, Senthil Kumar Marudhamuthu Shanmugam, Karthik Aruchamy, Sivasubramanian Palanisamy, Rajini Nagarajan, Nadir Ayrilmis. A review on natural fiber composites: Polymer matrices, fiber surface treatments, fabrication methods, properties, and applications. Volume 64, Issue 6, 2345-2373.
  5. Palanisamy, S., Murugesan, T. M., Palaniappan, M., Santulli, C., Ayrilmis, N., and Alavudeen, A. (2024). “Selection and processing of natural fibers and nanocellulose for biocomposite applications: A brief review,” BioResources 19(1), 1789-1813.
  6. Ban S, Taniki T, Sato H, Kono H, Iwaya Y, Miyamoto M. Acid etching of titanium for bonding with veneering composite resins. Dental Materials Journal [Internet]. 2006 Jun 1 [cited 2024 Jul 30];25(2):382–90.
  7. Singh R. A comparative analysis of sandblasted and acid etched and polished titanium surface on enhancement of osteogenic potential: An in vitro study. Journal of Dental Implants. 2012;2(1):15.
  8. Revankar GD, Shetty R, Rao SS, Gaitonde VN. Analysis of surface roughness and hardness in titanium alloy machining with polycrystalline diamond tool under different lubricating modes. Materials Research-ibero-american Journal of Materials. 2014 Aug 15;17(4):1010–22.
  9. Balza JC, Zujur D, Gil L, Subero R, E Gutiérrez Domínguez, Delvasto P, et al. Sandblasting as a surface modification technique on titanium alloys for biomedical applications: abrasive particle behavior. IOP conference series. 2013 Jun 7;45:012004–4.
  10. Molitor P, Barron V, Young T. Surface treatment of titanium for adhesive bonding to polymer composites: a review. International Journal of Adhesion and Adhesives. 2001 Jan;21(2):129–36.
  11. Cecilia Yan Guo, Jukka Pekka Matinlinna, James Kit-Hon Tsoi, Tin A. Residual Contaminations of Silicon-Based Glass, Alumina and Aluminum Grits on a Titanium Surface After Sandblasting. Silicon. 2015 Apr 3;11(5):2313–20.
  12. Aria Wira Yuda, Sugeng Supriadi, Agung Shamsuddin Saragih. Surface modification of Ti-alloy based bone implant by sandblasting. AIP conference proceedings [Internet]. 2019 Jan 1 [cited 2024 Jul 30]; Available from: https://pubs.aip.org/aip/acp/article/2193/1/020015/889553/Surface-modification-of-Ti-alloy-based-bone
  13. Jemat A, Ghazali MJ, Razali M, Otsuka Y. Surface Modifications and Their Effects on Titanium Dental Implants. BioMed Research International. 2015;2015:1–11.
  14. Palanisamy S, Murugesan TM, Palaniappan M, Santulli C, Ayrilmis N. Fostering sustainability: The environmental advantages of natural fiber composite materials – a mini review. ERT. 2024;7(2):256-69.
  15. Kurien, R.A., Selvaraj, D.P., Sekar, M. et al. A comprehensive review on the mechanical, physical, and thermal properties of abaca fibre for their introduction into structural polymer composites. Cellulose 30, 8643–8664 (2023). https://doi.org/10.1007/s10570-023-05441-z
  16. Ramakrishnan T, Mohan Gift MD, Chitradevi S, Jegan R, Hency Jose PS, Nagaraja HN, et al. Study of Numerous Resins Used in Polymer Matrix Composite Materials. Advances in Materials Science and Engineering [Internet]. 2022 Mar 20;2022:e1088926. Available from: https://www.hindawi.com/journals/amse/2022/1088926/
  17. Kazemi ME, Shanmugam L, Yang L, Yang J. A review on the hybrid titanium composite laminates (HTCLs) with focuses on surface treatments, fabrications, and mechanical properties. Composites Part A-applied Science and Manufacturing. 2020 Jan 1;128:105679–9.
  18. Hussian Siyal S, Ali Jogi S, Muhammadi S, Ahmed Laghari Z, Ali Khichi S, Naseem K, et al. Mechanical Characteristics and Adhesion of Glass-Kevlar Hybrid Composites by Applying Different Ratios of Epoxy in Lamination. Coatings. 2021 Jan 15;11(1):94.
  19. Hallett SR. Three-point beam impact tests on T300/914 carbon-fibre composites. Composites Science and Technology [Internet]. 2000 Jan 1 [cited 2024 Jul 30];60(1):115–24. Available from: https://www.sciencedirect.com/science/article/abs/pii/S0266353899000998
  20. Gouda PSS, Kudari SK, Prabhuswamy S, Jawali D. Fracture Toughness of Glass-Carbon (0/90)s Fiber Reinforced Polymer Composite – An Experimental and Numerical Study. Journal of Minerals and Materials Characterization and Engineering [Internet]. 2011 Jun 27 [cited 2024 Jul 30];10(8):671–82. Available from: https://www.scirp.org/journal/paperinformation?paperid=20899
  21. Azzam A, Li W. An experimental investigation on the three-point bending behavior of composite laminate. IOP Conference Series: Materials Science and Engineering. 2014 Aug 8;62:012016.
  22. Rajesh S, Vijayaramnath B, Elanchezhian C, Vivek S, Prasadh MH, Kesavan M. Experimental Investigation of Tensile and Impact Behavior of Aramid-Natural Fiber Composite. Materials Today: Proceedings. 2019;16:699–705.
  23. Genel K. Comparison of Mechanical Properties of Unidirectional and Woven Carbon, Glass and Aramid Fiber Reinforced Epoxy Composites. Acta Physica Polonica A [Internet]. 2017 Sep 1 [cited 2024 Jul 30]; Available from: https://www.academia.edu/117224965/Comparison_of_Mechanical_Properties_of_Unidirectional_and_Woven_Carbon_Glass_and_Aramid_Fiber_Reinforced_Epoxy_Composites.
  24. Ramesh V, Anand P. Evaluation of mechanical properties on Kevlar/Basalt fiber reinforced hybrid composites. Materials Today: Proceedings. 2020 Jun;39(4): 1494-1496.
  25. Suthan R, Jayakumar V, Madhu S. Evaluation of Mechanical Properties of Kevlar Fibre Epoxy Composites: An Experimental Study. International Journal of Vehicle Structures and Systems. 2018 Dec 31;10(6).
  26. Belan J, Lenka Kuchariková, Tillová E, Mária Chalupová. Three-Point Bending Fatigue Test of TiAl6V4 Titanium Alloy at Room Temperature. Advances in Materials Science and Engineering. 2019 Sep 10;2019:1–11.
  27. Mali M, Hussain AK, Muzafar MA, Zainol AFM, Mahmud J. Failure analysis of woven kevlar/epoxy composite laminates under compression due to variations in fiber orientation. Journal of Physics: Conference Series. 2019 Nov 1;1349(1):012050.
  28. Oliwa R. The Mechanical Properties of Kevlar Fabric/Epoxy Composites Containing Aluminosilicates Modified with Quaternary Ammonium and Phosphonium Salts. Materials. 2020 Aug 23;13(17):3726.
  29. Vasudevan A, Pandiyarajan R, Navin Kumar B, Vijayarangam J. Effect of Kevlar Ply Orientation on Mechanical Characterization of Kevlar-Glass Fiber Laminated Composites. IOP Conference Series: Materials Science and Engineering. 2020 Dec 16;988:012088.
  30. Rayhan SB, Rahman MM. Modeling elastic properties of unidirectional composite materials using Ansys Material Designer. Procedia Structural Integrity. 2020;28:1892–900.
  31. Ahmed PS, Fadhil BM, Mohamed AAK. Effect of Unidirectional and Woven Fibers on Impact Properties of Epoxy. Research Journal of Applied Sciences, Engineering and Technology [Internet]. 2016 [cited 2024 Jul 30];12(2):197–205. Available from: https://maxwellsci.com/jp/mspabstract.php?jid=RJASET&doi=rjaset.12.2321
  32. Sheikh S. Impact Strength Analysis of Polymer Composite Materials (PCM) Fiber Reinforced in the Fiberboat Application – Material Science Research India [Internet]. [cited 2024 Jul 30]. Available from: https://www.materialsciencejournal.org/vol17no2/impact-strength-analysis-of-polymer-composite-materials-pcm-fiber-reinforced-in-the-fiberboat-application/
  33. Tita V, de Carvalho J, Vandepitte D. Failure analysis of low velocity impact on thin composite laminates: Experimental and numerical approaches. Composite Structures. 2008 Jun;83(4):413–28.
  34. Heimbs S, Heller S, Middendorf P. Simulation of Low Velocity Impact on Composite Plates with Compressive Preload. 2008 Jan 1;
  35. Sharma RS. Design and Fabrication of Equipment for Low Velocity Impact Testing of Composite Sandwich Panels. wwwacademiaedu [Internet]. 2011 Jan 1
  36. ZIKE S, KALNINS K, OZOLINS O, KNITE M. An Experimental and Numerical Study of Low Velocity Impact of Unsaturated Polyester/Glass Fibre Composite. Materials Science. 2011 Nov 24;17(4).
  37. Balasubramani, S. Rajendra Boopathy. Damage area prediction of laminated composite plates after low velocity impact in ANSYS. 2013 Jan 1; 534-540.
  38. Taraghi I, Fereidoon A, Taheri-Behrooz F. Low-velocity impact response of woven Kevlar/epoxy laminated composites reinforced with multi-walled carbon nanotubes at ambient and low temperatures. Materials & Design. 2014 Jan;53:152–8.
  39. Buang ZB, Kashif SM. Simulation of Low Velocity Impact Test on Carbon/Epoxy Composite Plates. Advanced Materials Research. 2015 Jul;1115:523–6.
  40. N., Faizal. W.M., Iamie.M., Izatti.N., Hasni, N. THE DESIGN AND DEVELOPMENT DROP WEIGHT IMPACT TEST RIG PART 4. Second Integrated Design Project Conference (IDPC); December 2015. Universiti Malaysia Pahang 1-9.
  41. Jen1 MH, Cai DY, Chang CK, Hsu FC. Numerical Analysis and Experimental Verification of Ti/APC-2/Kevlar Hybrid Composite Laminates due to Low-Velocity Impact [Internet]. [cited 2024 Jul 30]. Available from: https://www.sci-en-tech.com/ICCM2018/PDFs/3117-11176-1-PB.pdf
  42. Ahmad F, Abbassi F, Park MK, Hong JW. Numerical investigation to evaluate effect of fiber orientation on penetration-resistance of an aircraft composite material. Mechanics of Advanced Materials and Structures [Internet]. 2018 [cited 2024 Jul 30];26(19):1613.
  43. Concli F, Gonzalez-Jimenez A, Manes A, Giglio M. Experimental testing and Numerical modelling of a Kevlar woven – epoxy matrix composite subjected to a punch test. Procedia Structural Integrity. 2019;24:3–10.
  44. Wang R, Chen DD, Zhu M, Xing SL. Dynamic effects of low-velocity impact on composite plates. IOP Conference Series Materials Science and Engineering. 2019 Oct 1;657(1):012058–8.
  45. Özdemir Z, Türkbas S, Yılmaz D. Low Velocity Impact Damage Response of Carbon Fiber Reinforced Composites at Low Temperatures. Dicle Üniversitesi Fen Bilimleri Enstitüsü Dergisi [Internet]. 2019 Dec 31 [cited 2024 Jul 30];8(3):35–60. Available from: https://dergipark.org.tr/en/pub/dufed/issue/50918/631485
  46. Canyi H, Lina C, Hong X, Yiping Q, Qing-Qing N. A numerical study on the low-velocity impact behavior of the Twaron® fabric subjected to oblique impact. Reviews on Advanced Materials Science [Internet]. 2021 Dec 1 [cited 2024 Jul 30];60(1):980–94. Available from: https://doaj.org/article/206b76432acd4dfe95a64dcc79cfd21c
  47. Mahesh V, Joladarashi S, Kulkarni SM. Comparative study on kevlar/carbon epoxy face sheets with rubber core sandwich composite for low velocity impact response: FE approach. Materials Today: Proceedings. 2021;44:1495–9.
  48. Roberts GD, Revilock DM, Binienda WK, Nie WZ, Mackenzie SB, Todd KB. Impact Testing and Analysis of Composites for Aircraft Engine Fan Cases. Journal of Aerospace Engineering [Internet]. 2002 Jul;15(3):104–10. Available from: https://ntrs.nasa.gov/api/citations/20020061387/downloads/20020061387.pdf
  49. Karahan M. Comparison of Ballistic Performance and Energy Absorption Capabilities of Woven and Unidirectional Aramid Fabrics. Textile Research Journal. 2008 Aug;78(8):718–30.
  50. Kumar S, Durga Shankar Gupta, Singh I, Sharma A. Behavior of Kevlar/Epoxy Composite Plates Under Ballistic Impact. Journal of Reinforced Plastics and Composites. 2009 Sep 8;29(13):2048–64.
  51. Ali A, Shaker ZR, Khalina A, Sapuan SM. Development of Anti-Ballistic Board from Ramie Fiber. Polymer-Plastics Technology and Engineering. 2011 Apr 13;50(6):622–34.
  52. Sikarwar R, Velmurugan R, Madhu V. Experimental and analytical study of high velocity impact on Kevlar/Epoxy composite plates. Open Engineering. 2012 Jan 1;2(4).
  53. Ramadhan AA, Abu Talib AR, Mohd Rafie AS, Zahari R. High velocity impact response of Kevlar-29/epoxy and 6061-T6 aluminum laminated panels. Materials & Design [Internet]. 2013 Jan 1;43:307–21. Available from: https://www.sciencedirect.com/science/article/pii/S0261306912004074
  54. Kamel H, Harraz O, Yacoub M. Developing a Custom Anthropometric Test Device for Experimental Evaluation of Blast Mitigation Seats. International Journal of Automotive and Mechanical Engineering. 2021 Mar 2;18(1)
  55. Soydan AM, Tunaboylu B, Elsabagh AG, Sarı AK, Akdeniz R. Simulation and Experimental Tests of Ballistic Impact on Composite Laminate Armor. Advances in Materials Science and Engineering. 2018 Aug 23;2018:1–12.
  56. Jensin Joshua, Singh D, Y. Murali Krishna, P. Sivaprakasam, D. Raja Joseph, Venkatanarayanan PS. Estimation of Impact Strength of Kevlar/Basalt and Kevlar/Glass Interwoven Composite Laminate after High-Velocity Bullet Impact. Advances in Materials Science and Engineering. 2023 Nov 20;2023:1–8.
  57. Hu Y, He Z, Xuan H. Impact Resistance Study of Three-Dimensional Orthogonal Carbon Fibers/BMI Resin Woven Composites. Materials. 2020 Oct 1;13(19):4376.
  58. Narendiranath BT, Singh AP, Reddy NS, Murpani D. SIMULATION OF BALLISTIC IMPACT ON DIFFERENT COMPOSITE SAMPLES OF BULLET PROOF VEST. IOP Conference Series: Materials Science and Engineering. 2021 Apr 1;1123(1):012030.
  59. Zhu Z, Li X, Yang R, Xie W, Zhang D. The energy dissipation mechanism of bi-metal Kevlartitanium fiber metal laminate under high-velocity impact. European Journal of Mechanics – A/Solids. 2023 Jul 1;100:104956–6.
  60. Giannopoulos IK, Mehdi Yasaee, Nikolaos Maropakis. Ballistic Impact and Virtual Testing of Woven FRP Laminates. Journal of composites science. 2021 Apr 22;5(5):115–5.
  61. Madika B, Syahrial AZ. Study of aluminum/kevlar fiber composite laminate with and without TiC nanoparticle impregnation and aluminum/carbon fiber composite laminate for anti-ballistic materials. International Journal of Lightweight Materials and Manufacture [Internet]. 2024 Jan 1 [cited 2024 Feb 28];7(1):62–71.
  62. Patterson BA, Busch CE, Bratcher M, Cline J, Harris DE, Masser KA, et al. Influence of temperature dependent matrix properties on the high-rate impact performance of thin glass fiber reinforced composites. Composites Part B: Engineering. 2020 Jul 1;192:108009–9.
  63. Li X, Zhang X, Guo Y, Shim VPW, Yang J, Chai GB. Influence of fiber type on the impact response of titanium-based fiber-metal laminates. International Journal of Impact Engineering. 2018 Apr;114:32–42.
  64. Stephen C, Mourad Abdel-HamidI, Shivamurthy B, Selvam R. Energy absorption and damage assessment of non-hybrid and hybrid fabric epoxy composite laminates: experimental and numerical study. Journal of Materials Research and Technology. 2021 Sep;14:3080–91.
Special Issue Subscription Review Article
Volume 13
Special Issue 02
Received 02/07/2024
Accepted 13/09/2024
Published 24/01/2025
Publication Time 206 Days
384

Login


My IP

PlumX Metrics