An Analysis of Machining Parameters for Metal Matrix Composite

Year : 2025 | Volume : 13 | Special Issue 02 | Page : 76 85
    By

    Kamalkishor Maniyar,

  • Shobha Rupanar,

  • Farook Sayyad,

  • Chetankumar Sedani,

  • Jagannath Gawande,

  • Prajakta Pawar,

  1. Assistant Professor, Department of Mechanical Engineering, Dr. D. Y. Patil Institute of Technology, Pimpri, Pune, Maharashtra, India
  2. Assistant Professor, Department of Applied Science, Ajeenkya D. Y. Patil School of Engineering, Lohegaon, Pune, Maharashtra, India
  3. Principal and Professor, Department of Mechanical Engineering, Ajeenkya D. Y. Patil School of Engineering, Lohegaon, Pune, Maharashtra, India
  4. Director and Professor, Department of Mechanical Engineering, P K Technical Campus, Chakan, Pune, Maharashtra, India
  5. Professor, Department of Mechanical Engineering, Ajeenkya D. Y. Patil School of Engineering, Lohegaon, Pune, Maharashtra, India
  6. Assistant Professor, Department of Mechanical Engineering, Dr. D. Y. Patil Institute of Technology, Pimpri, Pune, Maharashtra, India

Abstract

The electro-discharge machining analysis of hybrid Composite is presented in this work. Variables are chosen for the input process parameters. The material removal rate is acknowledged as an output parameter, together with the current, graphite and silicon carbide percentage and pulse on time. We used the Taguchi Method to conduct our experiments. To create the theoretical model and look into how process parameters affect the rate at which material is removed from hybrid Composite pieces, analysis of variance was used. The outcomes showed that the material removal rate accuracy of hybrid Composite is highly influenced by current, silicon carbide percentage, and graphite content. Additionally, the machining theoretical model is constructed and shows the effectiveness within the allowable range. The model is a great tool for accurately estimating the correction factors needed to machine complexly shaped hybrid Composite parts, it is concluded at the end. Aluminum and its alloys are widely employed in a wide range of technical applications due to their excellent mechanical qualities. However, strong reinforcement has been added to further increase its tribological properties. This strong aluminum metal matrix composite was complicated to manufacture and machine at the same time. The most common modern solution for overcoming this was the Electrical Discharge Machine. Nevertheless, in theory or experiment, there is insufficient data to machine it at the ideal parameter. These were designed to concentrate on assessing and enhancing the EDM process parameters.

Keywords: Hybrid composite, stir casting approach, elctro discharge machining mechanical properties, tribological characteristics.

[This article belongs to Special Issue under section in Journal of Polymer and Composites (jopc)]

aWQ6MTk1NDIyfGZpbGVuYW1lOjk4YjBjNjNhLWZpLXBuZy53ZWJwfHNpemU6dGh1bWJuYWls
How to cite this article:
Kamalkishor Maniyar, Shobha Rupanar, Farook Sayyad, Chetankumar Sedani, Jagannath Gawande, Prajakta Pawar. An Analysis of Machining Parameters for Metal Matrix Composite. Journal of Polymer and Composites. 2025; 13(02):76-85.
How to cite this URL:
Kamalkishor Maniyar, Shobha Rupanar, Farook Sayyad, Chetankumar Sedani, Jagannath Gawande, Prajakta Pawar. An Analysis of Machining Parameters for Metal Matrix Composite. Journal of Polymer and Composites. 2025; 13(02):76-85. Available from: https://journals.stmjournals.com/jopc/article=2025/view=195434


Browse Figures

References

  1. Sarde, B.; Patil, Y.D. Recent Research Status on Polymer hybrid Composite Used in Concrete—An Overview. Mater. Today Proc. 2019, 18, 3780–3790.
  2. Yahaya, R.; Sapuan, S.; Jawaid, M.; Leman, Z.; Zainudin, E. Mechanical performance of woven kenaf-Kevlar hybrid Hybrid Composite s. J. Reinf. Plast. Compos. 2014, 33, 2242–2254.
  3. Hsissou, R.; Benhiba, F.; Echihi, S.; Benkhaya, S.; Hilali, M.; Berisha, A.; Briche, S.; Zarrouk, A.; Nouneh, K.; Elharfi, A. New epoxy hybrid Composite polymers as a potential anticorrosive coatings for carbon steel in 3.5% NaCl solution: Experimental and computational approaches. Chem. Data Collect. 2021, 31, 100619.
  4. Valino, A.D.; Dizon, J.R.C.; Espera, A.H.; Chen, Q.; Messman, J.; Advincula, R.C. Advances in 3D printing of thermoplastic polymer hybrid Composite s and nanoHybrid Composite s. Prog. Polym. Sci. 2019, 98, 101162.
  5. Hsissou, R.; Bekhta, A.; Dagdag, O.; El Bachiri, A.; Rafik, M.; Elharfi, A. Rheological properties of hybrid Composite polymers and hybrid nanoHybrid Composite s. Heliyon 2020, 6, e04187.
  6. Mehra, N.; Mu, L.; Ji, T.; Yang, X.; Kong, J.; Gu, J.; Zhu, J. Thermal transport in polymeric materials and across hybrid Composite Appl. Mater. Today 2018, 12, 92–130.
  7. Thomason, J. A review of the analysis and characterisation of polymeric glass fibre sizings. Polym. Test. 2020, 85, 106421.
  8. Shlykov, E.S.; Ablyaz, T.R.; Oglezneva, S.A. Electrical Discharge Machining of Polymer hybrid Composite s. Russ. Eng. Res. 2020, 40, 878–879.
  9. Ablyaz, T.R.; Muratov, K.R.; Shlykov, E.S.; Shipunov, G.S.; Shakirzyanov, T.V. Electric-Discharge Machining of Polymer hybrid Composite s. Russ. Eng. Res. 2019, 39, 898–900.
  10. Yao, Y.; Wang, B.; Wang, J.; Jin, H.; Zhang, Y.; Dong, S. Chemical machining of Zerodur material with atmospheric pressure plasma jet. CIRP Ann. 2010, 59, 337–340.
  11. Shimpi, J.R.; Sidhaye, D.S.; Prasad, B.L. Digestive Ripening: A Fine Chemical Machining Process on the Nanoscale. Langmuir 2017, 33, 9491–9507.
  12. Romoli, L.; Tantussi, G.; Dini, G. Experimental approach to the laser machining of PMMA substrates for the fabrication of microfluidic devices. Opt. Lasers Eng. 2011, 49, 419–427.
  13. Li, Z.; Zheng, H.; Lim, G.; Chu, P.; Li, L. Study on UV laser machining quality of carbon fibre reinforced hybrid Composite s. Compos. Part A Appl. Sci. Manuf. 2010, 41, 1403–1408.
  14. Samant, A.N.; Dahotre, N.B. Laser machining of structural ceramics—A review. J. Eur. Ceram. Soc. 2009, 29, 969–993.
  15. Pham, D.T.; Dimov, S.S.; Ji, C.; Petkov, P.V.; Dobrev, T. Laser milling as a ‘rapid’ micromanufacturing process. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2004, 218, 1–7.
  16. Shi, B.; Dai, Y.; Xie, X.; Li, S.; Zhou, L. Arc-Enhanced Plasma Machining Technology for High Efficiency Machining of Silicon Carbide. Plasma Chem. Plasma Process. 2016, 36, 891–900.
  17. Malhotra, R.; Saxena, I.; Ehmann, K.F.; Cao, J. Laser-induced plasma micro-machining (LIPMM) for enhanced productivity and flexibility in laser-based micro-machining processes. CIRP Ann. 2013, 62, 211–214.
  18. Maniyar KG, Ingole DS. Multi response optimization of EDM process parameters for aluminium hybrid composites by GRA. Mater Today Proc. 2018; 5:1983643. https://doi.org/10.1016/j.matpr.2018.06.347
  19. Maniyar KG, Ingole DS. Investigation of EDM process parameters for hybrid metal matrix composites. IOP Conf Ser Mater Sci Eng. 2018; 377:012204. https://doi.org/10.1088/1757-899X/377/1/012204
  20. Maniyar KG, Ingole DS. Mathematical modeling and optimization of EDM process parameters for aluminium hybrid composites. Mater Today Proc. 2018; 5:27700-9. https://doi.org/10.1016/j.matpr.2018.10.004
  21. Maniyar KG, Ingole DS. Influence of EDM control factors for aluminium hybrid Composites. Lect Notes Multidiscipl Indust Eng. 2018; 275-84. https://doi.org/10.1007/978-3-319-76276-0_27
  22. Maniyar KG. An experimental analysis of aluminium hybrid metal matrix composites, Mater Today Proc. 2024. https://doi.org/10.1016/j.matpr.2024.01.021
  23. Maniyar KG, Marode RV, Chikalthankar SB. Optimization of EDM process parameters on MRR and TWR of Tungsten Carbide by Taguchi Method. Int J Eng Adv Technol. 2016; 5:112-16. https://doi.org/10.1016/j.matpr.2024.01.021
  24. Maniyar KG. Analysis of EDM process parameters on material removal rate of WC. 2nd Nat Conf Recent Inno Sci Eng. 2017; 5(9):37-9.
  25. Maniyar KG, Agrawal SK, Ingole DS. Optimization of multiple performance characteristics in EDM: A critical literature review. Int J Innov Technol Explor Eng. 2016; 5(10):27-33.
  26. Maniyar KG, Deore HV. Design and testing of carbon fiber composite material with comparative analysis. Int Res J Eng Tech. 2020; 7(8):1120-2.
  27. Maniyar KG, Ingole DS. Current research development in machining of hybrid metal matrix composites: A review. Int J Recent Innov Trends Comput Commun. 2016; 4(7):150-4.
  28. Pallavi Abhinandan Jadhav, Kamalkishor Maniyar, Evaluation and characterization of aluminum silicon carbide Metal Matrix Composites. AIP Conf Proc. 2024. https://doi.org/10.1063/5.0227945
  29. Maniyar K, Jadhav P, Biradar R, Gawande J. An experimental study of process parameters for nano composites. NanoWorld J. 2024; 10(S1):S209-11.
  30. Maniyar K, Jadhav P, Biradar R, Gawande J. Effect of nano-lubricants on journal bearing for performance enhancement. NanoWorld J. 2024; 10(S1):S206-8.
  31. Maniyar K, Suhane S. Parametric analysis of electric discharge machining for nano composites. NanoWorld J. 2024; 10(S1):S63-5.
  32. Maniyar K, Puri A, Pawar P, Patil V, Jadhav P, Patil G, et al. The comprehensive study for machining of metal matrix composites. AIP Conf Proc. 2024; 3196:040005– 5. https://doi.org/10.1063/5.0227955
  33. Maniyar K, Warke P, Jadhav P, Waware S, Harsur S, Biradar R. An extensive study of mechanical properties and tribological characteristics for hybrid composites. AIP Conf Proc. 2024; 3203:030038-8. https://doi.org/10.1063/5.0224994
  34. Maniyar K, Pawar P, Kolhe P, Ingale M, Patil P, Sarode G. The comprehensive study of synthesis and characterization of hybrid nano fluids. AIP Conf Proc. 2024; 3149: 030048. https://doi.org/10.1063/5.0224988
  35. Priti R. Ghutepatil; Sarika Khapare; Rujuta Barve Joshi; Kamalkishor G. Maniyar. A critical review of nanotechnology in various fields of engineering. AIP Conf Proc. 2024 3149: 030002. https://doi.org/10.1063/5.0224984
  36. Vaishnavi Thamke; Namrata Saravade; Snehal Banarase; Kamalkishor Maniyar. Seismic performance and cost analysis of AAC blocks vs. fly ash bricks: A comparative study utilizing STAAD pro. AIP Conf Proc. 2024 3196: 060006. https://doi.org/10.1063/5.0227895
  37. Snehal Banarase; Mayur Banarase; Namrata Saravade; Vashnavi Thamke; Kamalkishor Maniyar. Evaluation of concrete building strengthening through non-destructive testing methods – A case study. AIP Conf Proc. 2024 3196: 040001.https://doi.org/10.1063/5.0227927
  38. KamalKishor Maniyar, SunilKumar Harsur, Sagar N. Shinde, Jahier Abbas Shaaikh, Chandan M.N., Shobha Rupanar. An Experimental Investigation of Machining Parameters on Aluminum Composites. Journal of Polymer and Composites. 2024; 12(06):8-13.
  39. KamalKishor Maniyar, SunilKumar Harsur. Experimental Findings of the EDM Process Parameters for Metal Matrix Composites. Journal of Polymer and Composites. 2024; 12(06):14-18.
  40. Ramzi Saifan, Layan Abu Ali , Areej Abu Shreikh , Sharhabeel H. Alnabelsi, “Smart Walk: Case Studies on Hybrid Power Generation System of Piezoelectricity and Solar Power”. 2019 International Conference on Electrical and Computing Technologies and Applications (ICECTA)-2019
  41. Saravade, N., Sedani, C., Maniyar, K., Nandkishore, D., Deshmukh, S., Rupanar, S., Gidhad, B., & Surase, S. (2024). Study on Heavy Machinery Utilizing the Most Recent Technologies for Excavation of Road Construction and Mining. Journal of Mines, Metals and Fuels, 72(7), 667–673. https://doi.org/10.18311/jmmf/2024/45327
  42. Patil, G. H., Mishra, E., Maniyar, K., Rawoot, M., & Satarkar, M. F. A. R. (2024). Study on Prediction of Lightning Impulses on Transmission Line Tower Due to Harsh Field and Variable Working Condition, Environmental Condition and Tower Footing Resistances. Journal of Mines, Metals and Fuels, 72(7), 763–769. https://doi.org/10.18311/jmmf/2024/45322
  43. Jathar, A., Maniyar, K., Nawghare, B., Ansari, S., Priti Ghute Patil, Mali, C., Biradar, R., Deshmukh, S., Surase, S., & Gaikar, S. (2024). An Extensive Study of Nanomaterial and Nanotechnology in the Various Fields of Engineering. Journal of Mines, Metals and Fuels, 72(10), 1067–1074. https://doi.org/10.18311/jmmf/2024/45658
  44. Nawghare, B., Maniyar, K., Jathar, A., Mali, C., Pawar, D., Jadhav, S. P., Deshmukh, S., Rupanar, S., Biradar, R., Gawande, J., & Warghat, S. (2024). An Extensive Study of Nano Fluids and their Applications in Real Life. Journal of Mines, Metals and Fuels, 72(10), 1119–1124. https://doi.org/10.18311/jmmf/2024/45407
  45. Raut, P., Maniyar, K., Kakade, S., Rupanar, S., Bhalake, S., Mali, C., Deshmukh, S., & Biradar, R. (2024). A Comprehensive Analysis of the Synthesis, Properties and Uses of Nanofluid. Journal of Mines, Metals and Fuels, 72(9), 965–971. https://doi.org/10.18311/jmmf/2024/45524
  46. Warghat, S., Sedani, C., Rasane, A., Maniyar, K., Dhanwate, V., Jadhav, S. P., Deshmukh, S., Gawande, J., & Biradar, R. (2024). An Extensive Study of Metal Matrix Composites and their Various Properties for Different Uses. Journal of Mines, Metals and Fuels, 72(9), 949–955. https://doi.org/10.18311/jmmf/2024/45554
  47. Mali, C., Maniyar, K., Rupanar, S., Jathar, A., Nawghare, B., Kakade, N., Modak, G., Bhambere, V., Deshmukh, S., Gawande, J., & Biradar, R. (2024). An Analysis of Nanoparticles in Composite Materials. Journal of Mines, Metals and Fuels, 72(11), 1215–1223. https://doi.org/10.18311/jmmf/2024/45579
  48. Patil, G., Mishra, E., Maniyar, K., & Warke, P. (2024). Four Quadrant Operation of Induction Motor Using H-Bridge in Harsh and Noxious Environment Field with Dust, Voltage Fluctuation and Major Load Variations. Journal of Mines, Metals and Fuels, 72(11), 1225–1231. https://doi.org/10.18311/jmmf/2024/45557
  49. Mhaske, B. Gidhad, K. Maniyar and G. Ghuge, The Role of Linear Algebra in Developing Machine Learning Solutions,” 2024 3rd International Conference for Advancement in Technology (ICONAT), GOA, India, 2024, pp. 1-5, doi: 10.1109/ICONAT61936.2024.1077514
  50. Shahanwaz Khana, Rajsekhar Panuab, Probir Kumar Bose, Combined effects of piston bowl geometry and spray pattern on mixing,combustion and emissions of a diesel engine: A numerical approach, Fuel (2018)
  51. Maher, I.; Ling, L.H.; Sarhan, A.A.D.; Hamdi, M. Improve wire EDM performance at different machining parameters—ANFIS modeling. IFAC-PapersOnLine 2015, 48, 105–110.
  52. Wu, C.; Cao, S.; Zhao, Y.J.; Qi, H.; Liu, X.; Liu, G.; Guo, J.; Li, H.N. Preheating assisted wire EDM of semi-conductive CFRPs: Principle and anisotropy. J. Mater. Process. Technol. 2021, 288, 116915.
  53. Abbas, N.M.; Solomon, D.G.; Bahari, F. A review on current research trends in electrical discharge machining (EDM). Int. J. Mach. Tools Manuf. 2007, 47, 1214–1228.
  54. Abdallah, R.; Soo, S.L.; Hood, R. A feasibility study on wire electrical discharge machining of carbon fibre reinforced plastic hybrid Composite s. Procedia CIRP 2018, 77, 195–198.
  55. Dutta, H.; Debnath, K.; Sarma, D.K. Investigation on cutting of thin carbon fiber-reinforced polymer hybrid Composite plate using sandwich electrode-assisted wire electrical-discharge machining. Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng. 2021.
  56. Mohri, N.; Fukuzawa, Y.; Tani, T.; Saito, N.; Furutani, K. Assisting Electrode Method for Machining Insulating Ceramics. CIRP Ann. 1996, 45, 201–204.
  57. Mohri, N.; Fukusima, Y.; Fukuzawa, Y.; Tani, T.; Saito, N. Layer Generation Process on Work-piece in Electrical Discharge Machining. CIRP Ann. 2003, 52, 157–160.
  58. Lauwers, B.; Kruth, J.; Liu, W.; Eeraerts, W.; Schacht, B.; Bleys, P. Investigation of material removal mechanisms in EDM of hybrid Composite ceramic materials. J. Mater. Process. Technol. 2004, 149, 347–352.
Special Issue Subscription Original Research
Volume 13
Special Issue 02
Received 07/08/2024
Accepted 22/10/2024
Published 22/01/2025
Publication Time 168 Days
342

Login


My IP

PlumX Metrics