Influence of Center Cut Geometry and Power Law Index on the Free Vibration of Functionally Graded Shells

Open Access

Year : 2024 | Volume :12 | Special Issue : 04 | Page : 194-209
By
vector

Ramu Inala,

vector

Chandra Sekhar J,

vector

Venu M,

vector

Battina N. Malleswararao,

vector

Manikanta NVV,

  1. Assistant Professor, Mechanical Engineering, Vishnu Institute of Technology, Bhimavaram, Andhra Pradesh, India
  2. Assistant Professor, Mechanical Engineering, Vishnu Institute of Technology, Bhimavaram, Andhra Pradesh, India
  3. Assistant Professor, Mechanical Engineering, Vishnu Institute of Technology, Bhimavaram, Andhra Pradesh, India
  4. Associate Profesor, Mechanical Engineering, Shri Vishnu Engineering College for Women, Bhimavaram, Andhra Pradesh, India
  5. Assistant Professor, Mechanical Engineering, Vishnu Institute of Technology, Bhimavaram, Andhra Pradesh, India

Abstract document.addEventListener(‘DOMContentLoaded’,function(){frmFrontForm.scrollToID(‘frm_container_abs_120803’);});Edit Abstract & Keyword

This study explores the influence of power law variations and center cut geometries on the vibrational characteristics of functionally graded material (FGM) shells using finite element analysis (FEA). Stainless steel-alumina oxide (Al2O3) composites serve as the FGM, offering a unique blend of ceramic heat resistance and metallic toughness. Power law functions within APDL tailor material properties across the shell thickness. The research investigates vibrations under various boundary conditions (CCCC, CCFF, CFFF) for FGM shells with distinct center cuts (rectangular, circular, square). Key findings reveal a strong correlation between center cut geometry and natural frequencies. Square cuts induce the highest frequencies, while circular cuts exhibit the lowest. Rectangular cuts fall between these extremes. This emphasizes the center cut’s role in modulating vibrations. Furthermore, increasing the power law index systematically lowers frequencies across all cut sections. Boundary conditions significantly impact bending and torsional frequencies, with all sides clamped configurations yielding the highest values. This work provides valuable insights into tailoring vibration characteristics of FGM shells for diverse engineering applications.

Keywords: Functionally graded materials, Shell, Centre Cuts, Vibration, Finite element method.

[This article belongs to Special Issue under section in Journal of Polymer and Composites (jopc)]

aWQ6MTg0OTc3fGZpbGVuYW1lOmQwYmNlYmNmLWZpLXBuZy53ZWJwfHNpemU6dGh1bWJuYWls
How to cite this article:
Ramu Inala, Chandra Sekhar J, Venu M, Battina N. Malleswararao, Manikanta NVV. Influence of Center Cut Geometry and Power Law Index on the Free Vibration of Functionally Graded Shells. Journal of Polymer and Composites. 2024; 12(04):194-209.
How to cite this URL:
Ramu Inala, Chandra Sekhar J, Venu M, Battina N. Malleswararao, Manikanta NVV. Influence of Center Cut Geometry and Power Law Index on the Free Vibration of Functionally Graded Shells. Journal of Polymer and Composites. 2024; 12(04):194-209. Available from: https://journals.stmjournals.com/jopc/article=2024/view=0


Full Text PDF

Browse Figures

References
document.addEventListener(‘DOMContentLoaded’,function(){frmFrontForm.scrollToID(‘frm_container_ref_120803’);});Edit

  1. Naebe M, Shirvanimoghaddam. Functionally Graded Materials: A review of fabrication and properties. Materials Today 2016, 5: 223-245p.
  2. Ramu I and Mohanty SC. Modal analysis of functionally graded material plates using finite element method. Procedia Materials Science 2014, 6: 460-7p.
  3. Ramu I and Mohanty SC. Buckling analysis of rectangular functionally graded material plates under uniaxial and biaxial compression load. Procedia Engineering 2014, 86: 748-757p.
  4. Rao DK, Blessington PJ, Tarapada R. Finite element modelling and analysis of functionally graded (FG) composite shell structures. Procedia Engineering, 2012, 38:3192-9p.
  5. Sharma AK, Sharma P, Chauhan PS, et al. Study on harmonic analysis of functionally graded plates using FEM. Int J Applied Mechanics and Engineering, 2018, 23(4):941-961p.
  6. Ghassabi AA. Free vibration analysis of functionally graded rectangular nano-plates considering spatial variation of the non-local parameter. MSc Thesis, Middle East Technical University, Turkey, 2017.
  7. Ramu I and Mohanty SC. Free Vibration and Dynamic Stability of Functionally Graded Material Plates on Elastic Foundation. Defence Science Journal 2015, 65, no. 3, pp. 245-251p.
  8. Bhandari M, Purohit K. Analysis of functionally graded material plate under transverse load for various boundary conditions. IOSR Journal of Mechanical and Civil Engineering 2014, 10(5): 46-55p.
  9. Alif Ngimbi Diambu and Mehmet Çevik. Finite element analysis of a functionally graded plate. Third International Students Science Congress Proceedings, ,2019: 517-523p.
  10. Alif Ngimbi Diambu and Mehmet Çevik. Finite Element Vibration Analysis of a Functionally Graded Plate, 5th International Students Science Congress Proceedings, 2021,332-344p.
  11. Tawakol AE. Stress concentration analysis in functionally graded plates with elliptic holes under biaxial loadings. AinShams EngineeringJournal5 2014, (3):839-850p.
  12. Ramu Inala. Influence of Hygrothermal Environment and FG Material on Natural Frequency and Parametric Instability of Plates. Mechanics of Advanced Composite Structures‎, 2020, 7(1): 89-101p.
  13. Merdaci S, Mostefa AH, Merazi M, et al. Free vibration analysis of ceramic-metal functionally graded rectangular solar plates with porosities using high-order shear theory: Solar plate FG composed of (Al/Al2O3) and (Al/ZrO2) influence by porosity. 11thInternational Renewable Energy Congress (IREC), 2020.
  14. Liew KM, Kitipornchai S Leung, AYT, et al. Analysis of the free vibration of rectangular plates with central cut-outs using the discrete Ritz method. International Journal of Mechanical Sciences, 2003, 45: 941–959p.
  15. Kanak Kalita, Salil Haldar. Free vibration analysis of rectangular plates with central cutout. Cogent Engineering, .2016, 3(1),1163781p.
  16. Anjibabu Merneedi, Mohan Rao Nalluriand, Subba Rao VV. Free vibration analysis of a thin rectangular plate with multiple circular and rectangular cut-outs, Journal of Mechanical Science and Technology, 2017, 31: 5185–5202p.
  17. Khudhayer J Jadee, Balsam H Abed, Ali Adel Battawi. Free vibration of isotropic plates with various cutout configurations using finite elements and design of experiments. IOP Conference Series: Materials Science and Engineering, 2020, 745, 012080p.
  18. Lee HL, Lim SP, & Chow ST. Prediction of natural frequencies of rectangular plates with rectangular cutouts. Computers and Structures, 1990, 36: 861–9p.
  19. Torabi K and Azadi AR. Vibration analysis for rectangular plate having a circular central hole with point support by Rayleigh-Ritz method, Journal of Solid Mechanics, 2014, 6 (1): 28–42p.
Special Issue Open Access Original Research
Volume 12
Special Issue 04
Received 01/05/2024
Accepted 31/05/2024
Published 18/07/2024
157