Effect of Carbon Fiber on Mechanical Properties and Corrosion Behavior of Aluminium-6061 for Aerospace Applications

Open Access

Year : 2024 | Volume :11 | Special Issue : 13 | Page : 154-159
By

Praveen N.

Anil Kumar Nayaka M.

Sneha*

Purushotham G

  1. Assistant Professor Department of Aeronautical Engineering, Nitte Meenakshi Institute of Technology, Govindapura, Bengaluru Karnataka India
  2. Student Department of Aeronautical Engineering, Gopalan College of Engineering and Management, Bengaluru, Karnataka Karnataka India
  3. Student Department of Aeronautical Engineering, Gopalan College of Engineering and Management, Bengaluru Karnataka India
  4. Professor Department of Aeronautical Engineering, Gopalan College of Engineering and Management, Bengaluru, Karnataka India

Abstract

Composite materials have brought about a revolution in numerous industries due to their superior mechanical, electrical, and thermal properties. As a result, composites have emerged as a promising class of materials. In the present experimental study, we will compare sandwiched composite panels made from aluminum 6061 alloy and aluminum-carbon fiber-reinforced polymer (CFRP) with varying load-carrying capacities in terms of their mechanical properties and corrosion behavior. These specimens are prepared using a hand-layup process followed by vacuum bagging, and they are allowed to cure for a minimum of 24 hours. Several configurations were tested, and specimen samples were created to assess mechanical properties and corrosion behavior. To perform these assessments, a Universal Testing Machine (UTM)was used with the dial gauges placed on both sides of the panel to measure displacement around the panel’s center. Additionally, the test was carried out on the corrosion behavior of various specimens and analyzed to compare the outcomes between the two types of panels.

Keywords: Keywords: Composites, Aluminium Alloy, Carbon Fiber, Hand Lay-Up, Corrosion

[This article belongs to Special Issue under section in Journal of Polymer and Composites(jopc)]

How to cite this article: Praveen N., Anil Kumar Nayaka M., Sneha*, Purushotham G. Effect of Carbon Fiber on Mechanical Properties and Corrosion Behavior of Aluminium-6061 for Aerospace Applications. Journal of Polymer and Composites. 2024; 11(13):154-159.
How to cite this URL: Praveen N., Anil Kumar Nayaka M., Sneha*, Purushotham G. Effect of Carbon Fiber on Mechanical Properties and Corrosion Behavior of Aluminium-6061 for Aerospace Applications. Journal of Polymer and Composites. 2024; 11(13):154-159. Available from: https://journals.stmjournals.com/jopc/article=2024/view=142188

Full Text PDF Download

Browse Figures

References

  1. Khanna, Virat, Vanish Kumar, and Suneev Anil Bansal. “Aluminium-carbon fibre metal matrix composites: a review.” IOP Conference Series: Materials Science and Engineering. Vol. 1033. No. 1. IOP Publishing, 2021.
  2. Abhilash, E., and M. A. Joseph. “Carbon fibre reinforced aluminum matrix composite: Development & Evaluation of Mechanical Behaviors.” Proceedings of the Materials Science and Technology (MS&T) (2008).
  3. Shahrdami, L., A. Sedghi, and M. H. Shaeri. “Microstructure and mechanical properties of Al matrix nanocomposites reinforced by different amounts of CNT and SiCW.” Composites Part B: Engineering 175 (2019): 107081.
  4. Bi, S., et al. “Enhancing strength-ductility synergy of carbon nanotube/7055Al composite via a texture design by hot-rolling.” Materials Science and Engineering: A 806 (2021): 140830.
  5. Deng, C. F., et al. “Processing and properties of carbon nanotubes reinforced aluminum composites.” Materials Science and engineering: A1-2 (2007): 138-145.
  6. Syamsir, Agusril, and Norazman Mohamad Nor. “COMPARATIVE STUDY ON ALUMINIUM ALLOY AND CARBON FIBER REINFORCED POLYMER (CFRP) FOR MILITARY BRIDGES.” World engineering conference. 2010.
  7. Sharma, Arun Kumar, et al. “A study of fabrication methods of aluminum based composites focused on stir casting process.” Materials today: proceedings 27 (2020): 1608-1612.
  8. Nagavally, Rahul Reddy. “Composite materials-history, types, fabrication techniques, advantages, and applications.” J. Mech. Prod. Eng 5.9 (2017): 82-87.
  9. Johnyjames, S., and A. Raja Annamalai. “Fabrication of aluminium metal matrix composite and testing of its property.” Mechanics, Materials Science & Engineering MMSE Journal. Open Access 9 (2017).
  10. Madheshiya, Sushil, et al. “A review on fabrication and characterization of composite material and its buckling analysis through FEM.” International Journal 1 (2014): 185-193.
  11. Christy, T. V., N. Murugan, and S. Kumar. “A comparative study on the microstructures and mechanical properties of Al 6061 alloy and the MMC Al 6061/TiB2/12p.” Journal of Minerals & Materials Characterization & Engineering1 (2010): 57-65.
  12. Leon, J. Stephen, and V. Jayakumar. “Investigation of mechanical properties of aluminium 6061 alloy friction stir welding.” International Journal of Students’ Research in Technology & Management04 (2014): 140-144.
  13. Peng, Can, et al. “The corrosion behavior of the 6061 Al alloy in simulated Nansha marine atmosphere.” Journal of Materials Research and Technology 19 (2022): 709-721.
  14. Arunkumar, T., et al. “Influence of nanoparticles reinforcements on aluminium 6061 alloys fabricated via novel ultrasonic aided rheo-squeeze casting method.” Metals and Materials International1 (2022): 145-154.
  15. Thakur, Ankit, Varun Sharma, and Shailendra Singh Bhadauria. “Investigation of metallurgical characterization and mechanical properties of double-sided friction stir welding of aluminum 6061 T6 alloy.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture1-2 (2023): 16-30.
  16. Girish, B. M. “Fractography, Fluidity and tensile properties of aluminium/Haematite particle composite.” Journal of Mateials Engineering and performance3 (1999): 309-314.
  17. Kennedy, A. R., and S. M. Wyatt. “The effect of processing on the mechanical properties and interfacial strength of aluminium/TiC MMCs.” Composites science and technology2 (2000): 307-314.
  18. Surappa, Mirle Krishnegowda. “Aluminium matrix composites: Challenges and opportunities.” Sadhana 28 (2003): 319-334.
  19. Youssef, Y. M., R. J. Dashwood, and P. D. Lee. “Effect of clustering on particle pushing and solidification behaviour in TiB2 reinforced aluminium PMMCs.” Composites Part A: Applied Science and Manufacturing6 (2005): 747-763.
  20. Elatharasan, G., and VS Senthil Kumar. “An experimental analysis and optimization of process parameter on friction stir welding of AA 6061-T6 aluminum alloy using RSM.” Procedia Engineering 64 (2013): 1227-1234.
Special Issue Open Access Original Research
Volume 11
Special Issue 13
Received October 28, 2023
Accepted December 22, 2023
Published March 8, 2024
Views: 42