[{“box”:0,”content”:”
n
n
[/foreach]
n
n
- [foreach 286] [if 1175 not_equal=””]n
- Professor, Professor,Rivers State University Port, Rivers State University Port Harcourt,,
n [/if 1175][/foreach]
n
Abstract
n The application of reliability to monitor and predict the performance of mobile air compressor component of radiator unit was considered in this research. This study demonstrated some of the root cause of the radiator unit failure as effect of temperature and the nature of coolers used, because these
two parameters cause corrosion, shortage on fluid level and in turn influence the internal heat generated by radiator unit of the mobile air compressor. Adequate measures are projected by the maintenance team to ensure that these two factors identified do not cause shutdown of the gas plant
and the period of investigation it was revealed that the downtime values were increasing with decrease in the mean time between failure. The study further demonstrate that the reliability of the radiator unit component of the mobile air compressor decreases with time as cost of unreliability increase. This
menace can be controlled on the condition of regular check on each radiator fluid level and internal temperature circulation to avoid heating that may reduce the thermal properties of tube and shell components of the radiator unit in the mobile air compressor.n
n
Keywords: Evaluating, performance, mobile air compressor, component, radiator unit, application reliability
n [if 424 equals=”Regular Issue”][This article belongs to International Journal of Pollution: Prevention & Control(ijppc)]n
n
n
n
n
n
n
n
Full Text
n [if 992 equals=”Open Access”] nhttps://storage.googleapis.com/journals-stmjournals-com-wp-media-to-gcp-offload/2023/07/307d6662-39-43-evaluating-the-performance-of-mobile-air-compressor-component-1.pdf [else]nnvar fieldValue = “[user_role]”;nif (fieldValue == ‘indexingbodies’) {n document.write(‘https://storage.googleapis.com/journals-stmjournals-com-wp-media-to-gcp-offload/2023/07/307d6662-39-43-evaluating-the-performance-of-mobile-air-compressor-component-1.pdf’);n }nelse if (fieldValue == ‘administrator’) { document.write(‘https://storage.googleapis.com/journals-stmjournals-com-wp-media-to-gcp-offload/2023/07/307d6662-39-43-evaluating-the-performance-of-mobile-air-compressor-component-1.pdf’); }n else { document.write(‘ ‘); }nn[/if 992]nn [if 379 not_equal=””]n
Browse Figures
n
n [/if 379]n
n Referencesn
n [if 1104 equals=””]n
1. Amit, K. J, Maehul, R. & Ashok, K. G (2015) Air Driven Engine: A Case Study. International Journal of Innovation in Engineering Research and Management 2(2): 1-10
2. Ankit, S, &Manpreet, S. (2015) Parametric Analysis of an Air Driven Engine: A Critical Review. International Journal of Advanced Research in Engineering and Technology 6(4): 1-9.
3. Arjit, M, Arif, K, Darshika, B. &Nainsi, G. (2014) Modified Compressed Air Engine Two Stroke Engine Working On The Design Of A Four Stroke Petrol Engine. International Journal on Theoretical and Applied Research in Mechanical Engineering 3(4): 1-3
4. Bair, S. (2003). Miniature Scale Engines, Georgia Institute of Technology, Research FacultyJournal of Tribology
5. Dekker, S. (2006). The field guide to understand human error.Ashgate publishing company, England 25-30.
6. Ekong, G.I., Ibibom, E.N.,&Bassey, I.U. (2020). Performance Analysis of a Single-acting Reciprocating Compressor Using Thermodynamic Concept. International Journal of Engineering Science Invention (IJESI), 9(5), 20-31.
7. Enrico Da Riva, &Davide Del Col (2011). Performance of a semi-hermetic reciprocating compressor with propane and mineral oil,International journal of refrigeration 34 (3), 752-763.
8. Fujiwara, M., Kasuya, K. Matsunaga, M.,&Watanabe, T. (1984) Computer modeling for performance analysis of rotary screw compressor, International Compressor Engineering Conference at Purdue 1984, 536-543.
9. Gopalakrishnan, B., Gupta, D. Mardikar Y., Chaudhari, S.,&Jadeja J. (2007). Diagnostics for developing energy efficiency measures in compressed air systems, Energy Efficient Manufacturing, Vol.SP-2109,SAE World Congress and Exhibition, Detroit, MI, USA, 16/04/2007. https//doi.org/10.4271/2007-01-1331.
10. Hao, H. B. & Su, C. (2014). Reliability Analysis on Competitive Failure Process under Multiple Failure Modes, Applied Mechanics and Materials, ISSN: 1662-7482, Vol. 442, 257-263. Doi: 10.4028/www.scientific.net/AMM.442.257 © Trans Technology Publication Ltd, Switzerland.
11. Jabardo, J. M. S., Mamani W. G., andIanella M. R., (2002) Modeling and experimental evaluation of an automotive air conditioning system with a variable capacity compressor,International. Journal of Refrigeration, 25, 1157–1172.
12. Kent, R.G (1974). Application of Basic Thermodynamics to Compressor Cycle Analysis; Proceedings of the 1974 international compressor conference, Purdue university, west Lafayette,Indiana, 291-296.
nn [/if 1104][if 1104 not_equal=””]n
- [foreach 1102]n
- [if 1106 equals=””], [/if 1106][if 1106 not_equal=””],[/ifn 1106]
n [/foreach]n
n [/if 1104]n
nn
n [if 1114 equals=”Yes”]n
n [/if 1114]nnn
n
n
n
International Journal of Pollution: Prevention & Control
n
n
n
n
n
| Volume | 01 |
| Issue | 01 |
| Received | June 9, 2023 |
| Accepted | June 20, 2023 |
| Published | June 27, 2023 |
n
n
n
n
n [/foreach]n
n [/if 1190] [if 1177 not_equal=””]n
n
n [/foreach]n
n [/if 1177]n
n
n
nnn.mq{ndisplay: flex; justify-content: space-between; width: 1280px; margin: auto;}n .flx {display: flex;margin: 2px;}n.jcsb {justify-content: space-between;}n.w1280 {width: 1280px; margin: auto;}n.w75p {width: 75%; padding:4px 20px 4px 20px; margin:0 10px 0 0; box-shadow: 0 4px 8px 0 rgba(0, 0, 0, 0.2), 0 6px 20px 0 rgba(0, 0, 0, 0.19);}n.w25p {width: 25%; padding: 4px 10px 4px 10px; margin: 0 0 0 10px; box-shadow: 0 4px 8px 0 rgba(0, 0, 0, 0.2), 0 6px 20px 0 rgba(0, 0, 0, 0.19);}n.dvct {border: 1px solid navajowhite;n padding: 4px;n margin-bottom: 4px;n background: #43ff86;}n.post-views {text-align: center;}n.ALLreveiwers img,n .ALLeditors img {n width: 50px;n height: 50px;n border-radius: 50px;n margin: 10px;n } n.ALLreveiwers,n .ALLeditors {n border-bottom: 1px solid black;}n.modaltext {n color: white;n padding: 0px 30px 0px 30px;n text-decoration: none;n }n.modaltext:hover {n color: black;n background-color: rgb(255 221 204);n color: black;n }n.modal-content {n margin-top: 50%;n }n table,n tr,n td {n padding: 10px;n border: none;n }n h2 {n font-size: 16px !important;n font-family: ‘Roboto’, Slab !important;n line-height: 1.4em;n }n h3 {n font-size: 16px !important;n font-family: ‘Roboto’, Slab !important;n }n h4 {n font-family: ‘Roboto’, Slab !important;n }n p {n font-size: 14px !important;n font-family: ‘Roboto’, Slab !important;n }n a {n color: blue;n font-size: 15px !important;n font-family: ‘Roboto’, Slab !important;n }n li,n p {n font-size: 15px !important;n font-family: ‘Roboto’, Slab !important;n text-align: justify;n }n .authdiv img {n max-width: 17px;n max-height: 17px;n }n.authdiv {n display: flex;n padding: 1px 2px;n }n@media only screen and (max-width:768px){n.mq{display:block; width:100%; padding:4px;}n.w75p{width:100%;}n.w25p{width:100%;}n}nnn function myFunction2() {n var x = document.getElementById(“browsefigure”);n if (x.style.display === “block”) {n x.style.display = “none”;n }n else { x.style.display = “Block”; }n }n document.querySelector(“.prevBtn”).addEventListener(“click”, () => {n changeSlides(-1);n });n document.querySelector(“.nextBtn”).addEventListener(“click”, () => {n changeSlides(1);n });n var slideIndex = 1;n showSlides(slideIndex);n function changeSlides(n) {n showSlides((slideIndex += n));n }n function currentSlide(n) {n showSlides((slideIndex = n));n }n function showSlides(n) {n var i;n var slides = document.getElementsByClassName(“Slide”);n var dots = document.getElementsByClassName(“Navdot”);n if (n > slides.length) { slideIndex = 1; }n if (n (item.style.display = “none”));n Array.from(dots).forEach(n item => (item.className = item.className.replace(” selected”, “”))n );n slides[slideIndex – 1].style.display = “block”;n dots[slideIndex – 1].className += ” selected”;n }nnn function myfun() {n x = document.getElementById(“editor”);n y = document.getElementById(“down”);n z = document.getElementById(“up”);n if (x.style.display == “none”) {n x.style.display = “block”;n }n else {n x.style.display = “none”;n }n if (y.style.display == “none”) {n y.style.display = “block”;n }n else {n y.style.display = “none”;n }n if (z.style.display == “none”) {n z.style.display = “block”;n }n else {n z.style.display = “none”;n }n }n function myfun2() {n x = document.getElementById(“reviewer”);n y = document.getElementById(“down2”);n z = document.getElementById(“up2”);n if (x.style.display == “none”) {n x.style.display = “block”;n }n else {n x.style.display = “none”;n }n if (y.style.display == “none”) {n y.style.display = “block”;n }n else {n y.style.display = “none”;n }n if (z.style.display == “none”) {n z.style.display = “block”;n }n else {n z.style.display = “none”;n }n }n”}]