Amit Shishodia,
- Student, Department of Mechanical Engineering, Noida International University, Sector 17A, Greater Noida, Gautam Budh Nagar, Uttar Pradesh, India
Abstract
Design for Additive Manufacturing (DFAM) is a new methodology that focuses on maximizing the special potential of 3D printing technologies to optimize machine components. Contrasting to traditional manufacturing processes, additive manufacturing (AM) makes it feasible to create complicated shapes that would be impossible or difficult to do using standard methods like casting or machining. This study explores the principles of DFAM, including the advantages it offers in terms of design flexibility, material efficiency, and performance optimization. The research highlights how engineers and designers can leverage 3D printing to improve the function, strength, and cost- effectiveness of machine components. Furthermore, it discusses key considerations in DFAM, such as material selection, the impact of part orientation, support structures, and post-processing. To illustrate how DFAM has been utilized efficiently in sectors including aerospace, automotive, and medical devices, instances of use are given. The difficulties and potential paths for DFAM as the technology develops are covered in the conclusion of the study.
Keywords: Additive manufacturing, DFAM, direct metal laser sintering, 3D printing
[This article belongs to International Journal of Machine Systems and Manufacturing Technology ]
Amit Shishodia. Design for Additive Manufacturing (DFAM) Leveraging 3D Printing to Optimize Machine Components. International Journal of Machine Systems and Manufacturing Technology. 2024; 02(02):9-14.
Amit Shishodia. Design for Additive Manufacturing (DFAM) Leveraging 3D Printing to Optimize Machine Components. International Journal of Machine Systems and Manufacturing Technology. 2024; 02(02):9-14. Available from: https://journals.stmjournals.com/ijmsmt/article=2024/view=196755
References
1. Berman B. 3D Printing: The New Industrial Revolution. Bus Horiz. 2012; 55(2): 155–162. Elsevier.
DOI: 10.1016/j.bushor.2011.11.003
2. Ngo TD, Kashani A, Imbalzano G, Nguyen KT, Hui D. Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications, and Challenges. Compos B: Eng. 2018; 143: 172– 196. Elsevier. DOI: 10.1016/j.compositesb.2018.02.012
3. Gibson I, Rosen DW, Stucker B. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing. 2nd Edn. New York: Springer; 2015. ISBN: 978-1- 4939-2113-3
4. Thompson MK, Moroni G, Van der Meer T, Williams CK. Design for Additive Manufacturing: Trends, Opportunities, and Challenges. Procedia CIRP. 2016; 50: 21–26. Elsevier. DOI: 10.1016/j.procir.2016.04.068
5. Tsai CY, Cheng CW, Lee AC, Tsai MC. Synchronized multi-spot scanning strategies for the laser powder bed fusion process. Addit Manuf. 2019;27:1–7. DOI: 10.1016/j.addma.2019.02.009.
6. Rosen DW. Computer-Aided Design for Additive Manufacturing of Cellular Structures. Comput- Aided Des. 2011; 43(7): 808–819. Elsevier. DOI: 10.1016/j.cad.2011.01.004
7. Leicht A, Klotz L, Richter U. Design for Additive Manufacturing in the Aerospace Industry: A Review of Challenges and Opportunities. Procedia CIRP. 2016; 57: 173–178. Elsevier. DOI: 10.1016/j.procir.2016.11.062
8. Zhang Y, Zhang M. Topology Optimization for Additive Manufacturing: A Review of Methods and Applications. Arch Comput Methods Eng. 2020; 27(4): 957–987. Springer. DOI: 10.1007/s11831-019-09393-9
9. Wang Y, Xie T, Deng J. Additive Manufacturing and Design for Additive Manufacturing: A Review. Adv Mat Res. 2018; 1139: 3–10. Trans Tech Publications.
DOI: 10.4028/www.scientific.net/AMR.1139.3
10. Friedrich J, Greil P. Additive Manufacturing of Complex Ceramics: Opportunities and Challenges. J Eur Ceram Soc. 2014; 34(1): 5–10. Elsevier. DOI: 10.1016/j.jeurceramsoc.2013.08.017
| Volume | 02 |
| Issue | 02 |
| Received | 19/11/2024 |
| Accepted | 22/11/2024 |
| Published | 30/11/2024 |
Login
PlumX Metrics