DESIGN AND FABRICATION OF THERMAL INSULATED OVERHEAD WATER TANKS

Year : 2025 | Volume : 03 | Issue : 02 | Page : 32 40
    By

    Pravesh Chandra,

  • Vardanshi Varma,

  • Arun Kumar,

  • Deepak Saini,

  1. Assistant Professor, Department of Mechanical Engineering Moradabad Institute of Technology, Moradabad, Uttar Pradesh, India
  2. UG Student, Department of Mechanical Engineering Moradabad Institute of Technology, Moradabad, Uttar Pradesh, India
  3. UG Student, Department of Mechanical Engineering Moradabad Institute of Technology, Moradabad, Uttar Pradesh, India
  4. UG Student, Department of Mechanical Engineering Moradabad Institute of Technology, Moradabad, Uttar Pradesh, India

Abstract

Overhead water containers are essential for storing water in residential and commercial structures, but because of varying weather, they are sometimes subject to extreme temperature swings. During the summer, the average temperature regularly surpasses 50°C. In residential and commercial structures, above water tanks are essential for water garages; but, due to changing climate conditions, they may be subjected to high temperature changes on a regular basis. The tanks are primarily situated on building roofs, where they are exposed to the sun’s direct rays and lack insulation or shade. The material of the tank cannot lessen the impact of sunlight. This objective focuses on creating cutting-edge insulation devices that reduce temperature fluctuations and ensure that water remains at a comfortable and usable temperature throughout the year. By reducing thermal loss by at least 50% as compared to uninsulated tanks, the suggested insulating solution offers a practical and affordable method for preserving strength and improving water usability. A thorough examination of insulation materials, selection of a durable and climate-resistant solution, and design of a prototype specifically designed for overhead water tanks are all part of the task. The effectiveness of the device will be compared through rigorous testing in both summer and winter conditions. If it works, the solution might be scalable for a wide range of tank sizes, opening the door for massive deployment. An urgent need for green water and sustainable parking systems is addressed in this study.

Keywords: Thermal insulation, Temperature regulation, Weather-resistant materials, Prototype design, Innovation

[This article belongs to International Journal of Energy and Thermal Applications ]

How to cite this article:
Pravesh Chandra, Vardanshi Varma, Arun Kumar, Deepak Saini. DESIGN AND FABRICATION OF THERMAL INSULATED OVERHEAD WATER TANKS. International Journal of Energy and Thermal Applications. 2025; 03(02):32-40.
How to cite this URL:
Pravesh Chandra, Vardanshi Varma, Arun Kumar, Deepak Saini. DESIGN AND FABRICATION OF THERMAL INSULATED OVERHEAD WATER TANKS. International Journal of Energy and Thermal Applications. 2025; 03(02):32-40. Available from: https://journals.stmjournals.com/ijeta/article=2025/view=230910


References

[1] Gupta, A., and Kumar, R. (2018). “Thermal performance of polyurethane foam as an insulating material.” Journal of Thermal Sciences International, 130, 186-196 a thorough investigation into polyurethane foam’s capacity to control temperature.

[2] Abbas, M., and Zia, H. (2020). “Energy-efficient water storage systems: A review of insulation technologies.” Reviews of Sustainable and Renewable Energy, 123, 109776 examines the energy-saving advantages of various water tank insulation systems.

[3] Sahoo, N., Sahoo, S.K., 2008, “Design of water tank”, B.E., Project work, Dept. of Civil Engineering, NIT, Rourkela, India.

[4] Meier, S., 2010, “Steel Water storage Tanks: Design, Construction, Maintenance, and Repair”, ISBN: 9780071549387, American Water Works Association.

[5] Air Force Manual, 1985, “Water supply, water storage”, TM 5-813- 4, AFM 88-10, Vol 4, Departments of the Army and the Air Force, Washington DC.

[6] Dwivedi, V., Counsell, J., 2009, “Thermal Modeling and Control of Domestic Hot Water Tank”, Master’s Thesis, Dept. of Mechanical Engineering, University of Strathclyde, United Kingdom.

[7] Cruickshank, C.A., Harrison, S.J., 2010, “Heat loss characteristics for a typical solar domestic hot water storage”, Energy and Buildings, Volume 42, Issue 10, pp 1703-1710.

https://doi.org/10.1016/j.enbuild.2010.04.013.

[8] Devore,N., Yip, H., and Rhee, J., 2013, “Domestic Hot Water Storage Tank: Design and Analysis for Improving Thermal Stratification, “Journal of Solar Energy Engineering” ,Vol. 135 Issue 4. https://doi.org/10.1115/1.4025517.

[9] Niskanen, M., 2003, “The Design, Construction, and Maintenance of a Gravity Fed Water System in the Dominican Republic”, Master’s Thesis, Dept. of Civil Engineering, Michigan Technological University.

[10] Hepbasli, A., Alsuhaibani, Z., 2011, “A key review on present status and future directions of solar energy studies and applications in Saudi Arabia”, Renewable and Sustainable Energy Reviews, Volume 15, pp 5021-2050.

https://doi.org/10.1016/j.rser.2011.07.052.

[11] Al-Masoud A.H., Gandayh, M. H., 2015, “Future of solar energy in Saudi Arabia”, Journal of King Saud University – Engineering Sciences, Volume 27, pp 153-157.

[12] Abdullah S. G., 2010, “Numerical simulation of water temperature in intermittent water supply systems”, International Journal of Civil and Environmental Engineering, Vol 10, no. 2.

[13] Al-Juruf R. S., Ahmed, F. A., Alam, I. A., and Abdel Rahman, H.H., 1988, “Development of heat insulating materials using date palm leaves”, Journal of Building Physics, Vol 11, No. 3.

https://doi.org/10.1177/109719638801100304.

[14] Fouli, H., Alshaikh, A. A., Nurdin, J., Alam, S., and Alnaimat, H., 2014, “Evaluating the use of Palm based insulators for reducing peak water temperatures during summer and for saving energy during winter in existing overhead storage water tanks”, Arabian Journal for Science and Engineering, Vol 39, Issue 6.

[15] Heisler, G.M., 1986, “Effects of individual trees on the solar radiation climate of small buildings”, Urban Ecology, Vol 9. https://doi.org/10.1016/0304-4009(86)90008-2.

[16] Mohammad F.S., Salleh, E., and Musatafa, K.M.S., 2007, “Effect of tea canopies on solar radiation filtration in a tropical microclimatic environment”, PLEA2007 Conference, Singapore.

[17] http://solarelectricityhandbook.com/solar-irradiance.html, acessed on 11.48am, December 3, 2016.

[18] Incropera, F. P., Dewitt, D. P., Bergman, T. L., and Lavine, A. S. 2006. Fundamentals of Heat and Mass Transfer, fourth Edition, John Wiley & Sons, Inc., New York.

[19] Stamps, R.H., 2009, “Use of colored shade netting in horticulture”, HortScience, Vol 44, No.

[20] Goswami, D. Y., and Kreith, F. (2007). Heat transfer principles. Cengage Education gives a basic understanding of insulating materials    and thermal conductivity.

[21] J. Parker (2015). An Overview of the Science of Building Materials. Springer explains the characteristics and uses of construction materials, such as thermal insulation.

Regular Issue Subscription Original Research
Volume 03
Issue 02
Received 01/10/2025
Accepted 31/10/2025
Published 05/11/2025
Publication Time 35 Days
166

Login


My IP

PlumX Metrics