[{“box”:0,”content”:”
n
n
- n t
n
Dr. Ashis Acharjee, Abhishek Bhadauria, Krushnakant Borude
[/foreach]
n
n
n
- [foreach 286] [if 1175 not_equal=””]n t
- Assistant Professor, Student, Student, Department of Mechanical, NIT Agartala, Department of Mechanical, NIT Agartala, Department of Mechanical, NIT Agartala, West Tripura, West Tripura, West Tripura, India, India, India
n[/if 1175][/foreach]
n
Abstract
nHome chimneys remove pollution by products of fossil fuels from the atmosphere. Today’s environmental problems are worsening rapidly due to technology and population growth. Thus, researchers developed a hybrid micro kitchen chimney to help rural residents at a low cost. This small hybrid chimney simplifies rural cooking. A kitchen chimney is the best way to remove smoke, grease, stink, stains, oil droplets, and more from the kitchen. It helps ventilate the kitchen. Choosing the best option is difficult. This study introduces a hybrid mini-kitchen chimney for rural areas to improve performance, reduce household air pollution, and save energy. Our present work uses CFD to estimate and assess the flow mechanics in and around the kitchen chimney region. CFD study results will inform kitchen plan refinement. Sunlight powers the hybrid chimney
n
Keywords: hybrid mini kitchen chimney, rural areas, CFD, Solar power, optimum performance.
n[if 424 equals=”Regular Issue”][This article belongs to International Journal of Energy and Thermal Applications(ijeta)]
n
n
n
n
n
nn
nn[if 992 equals=”Open Access”] Full Text PDF[else] nvar fieldValue = “[user_role]”;nif (fieldValue == ‘indexingbodies’) {n document.write(‘Full Text PDF‘);n }nelse if (fieldValue == ‘administrator’) { document.write(‘Full Text PDF‘); }nelse if (fieldValue == ‘ijeta’) { document.write(‘Full Text PDF‘); }n else { document.write(‘ ‘); }n [/if 992] [if 379 not_equal=””]nn
Browse Figures
n
n
n[/if 379]n
References
n[if 1104 equals=””]n
- Bruce N, Dora C, Krzyzanowski M, Adair-Rohani H, Morawska L, Wangchuk T et al. Household Air Pollution Is A Major Avoidable Risk Factor For Cardiorespiratory Disease, 2013, 125: 138–145.
- Chu L., Ahemad M., Ossenn D. ,Hamid et al. Effective solar chimney cross section ventilation performance in Malaysia M., International conference Green Architecture for Sustainable Living and Environment, 2014, 7: 215–233.
- Chae M.,Chung B. (2015); Heat transfer effects of chimney height, diameter, and Prandtl number, International Communications in Heat and Mass Transfer, 2015, 17: 185–194.
- Faras O., Jara F., Betancourt R et al. Theoretical and experimental study of the natural draft in chimneys of buildings for domestic gas appliances, 2006, 19: 163–172.
- Jing H., Chen Z., Li A et al. Experimental study of the prediction of the ventilation flow rate through solar chimney with large gap-to-height ratios, Building and Environment, 2015, 11: 475-486.
- Krzaczek M., Florczuk J. , Tejchman J et al. Field investigations of stack ventilation in a residential building with multiple chimneys and tilted window in cold climate ,Energy and Buildings, 2015, 32: 1189–1200.
- Lal S , S. Kaushik , R Hans (2015); Experimental investigation and CFD simulation studies of a laboratory scale solar chimney for power generation, Sustainable Energy Technologies and Assessments, 2015, 17: 143-167.
- Li A. , Zhao Y., Jiang D., Hou X et al. Measurement of temperature, relative humidity, concentration distribution and flow field in four typical Chinese commercial kitchens, Building and Environment, 2012, 7: 17-27.
- Martin WJ, Glass RI, Balbus JM, Collins FS. (2011); One hundred million improved cook stoves in China: How was it done?, 2011, 5: 142-161.
- Pallarés F., Ivorra S., Pallarés L., Adam J et al. State of the art of industrial masonry chimneys: A review from construction to strengthening, Construction and Building Materials, 2011, 17: 131- 147.
- Patel S, Prasad S, Ahmed R. (2013); Computational studies on the effect of geometric parameters on the performance of a solar chimney power plant, Energy Conversion and Management, 2013, 7: 19-27.
- Prapas J., Baumgardner M., Marchese A., Willson B., DeFoort M et al. Influence of chimneys on combustion characteristics of buoyantly driven biomass stoves, Energy for Sustainable Development, 2014, 9: 121-137.
- Previdi F , Spelta C., Madaschi M., Belloli D., Savaresi S., Faginoli F., Silani E et al. Active vibration control over the flexible structure of a kitchen hood, Mechatronics, 2014, 13: 141-163.
- Rahmana M., Chua C., Kumaresena S., Yana F., Kima P., Mashudb M et al. Evaluation of the Modified Chimney Performance to Replace Mechanical Ventilation System for Livestock Housing, 10th International Conference on Mechanical Engineering, (ICME), 2013, 17: 171-187.
- Sakonidou V , Karapantsios T. , Balouktsis A., Chassapis D et al. Modeling of the optimum tilt of a solar chimney for maximum air flow, 2007, 11: 113-123.
- Yujiao Zhaoa,*, Dengyu Zhaoa , Bo Zhanga , Liu Chena , Hanling Xuea, Correction and analysis of calculation equations of the thermal plume above kitchen appliances, ScienceDirect, Procedia Engineering 205 (2017) 1186–1192, 10th International Symposium on Heating, Ventilation and Air Conditioning, ISHVAC2017, 19- 22 October 2017, Jinan, China
- Shubhajyoti Saha, Abhijit Guha, Subhransu Roy, Experimental and computational investigation of indoor air quality inside several community kitchens in a large campus, June 2012
- Gao, Y. Li, X. Chen, S. Li, L. Ren and B. Z. Tang, Aggregation-induced emission probe for light-up and in situ detection of calcium Ions at high concentration, ACS Appl. Mater. Interfaces, 2018, 10, 14410–14417
nn[/if 1104][if 1104 not_equal=””]n
- [foreach 1102]n t
- [if 1106 equals=””], [/if 1106][if 1106 not_equal=””],[/if 1106]
n[/foreach]
n[/if 1104]
nn
nn[if 1114 equals=”Yes”]n
n[/if 1114]
n
n
n
n
n
n
n
Volume | 01 |
Issue | 01 |
Received | September 8, 2023 |
Accepted | September 14, 2023 |
Published | December 12, 2023 |
n
n
n
n
n[/foreach]
n[/if 1190] [if 1177 not_equal=””]n
n
n[/foreach]
n[/if 1177]
n
n
n
n function myFunction2() {n var x = document.getElementById(“browsefigure”);n if (x.style.display === “block”) {n x.style.display = “none”;n }n else { x.style.display = “Block”; }n }n document.querySelector(“.prevBtn”).addEventListener(“click”, () => {n changeSlides(-1);n });n document.querySelector(“.nextBtn”).addEventListener(“click”, () => {n changeSlides(1);n });n var slideIndex = 1;n showSlides(slideIndex);n function changeSlides(n) {n showSlides((slideIndex += n));n }n function currentSlide(n) {n showSlides((slideIndex = n));n }n function showSlides(n) {n var i;n var slides = document.getElementsByClassName(“Slide”);n var dots = document.getElementsByClassName(“Navdot”);n if (n > slides.length) { slideIndex = 1; }n if (n (item.style.display = “none”));n Array.from(dots).forEach(n item => (item.className = item.className.replace(” selected”, “”))n );n slides[slideIndex – 1].style.display = “block”;n dots[slideIndex – 1].className += ” selected”;n }n n function myfun() {n x = document.getElementById(“editor”);n y = document.getElementById(“down”);n z = document.getElementById(“up”);n if (x.style.display == “none”) {n x.style.display = “block”;n }n else {n x.style.display = “none”;n }n if (y.style.display == “none”) {n y.style.display = “block”;n }n else {n y.style.display = “none”;n }n if (z.style.display == “none”) {n z.style.display = “block”;n }n else {n z.style.display = “none”;n }n }n function myfun2() {n x = document.getElementById(“reviewer”);n y = document.getElementById(“down2”);n z = document.getElementById(“up2”);n if (x.style.display == “none”) {n x.style.display = “block”;n }n else {n x.style.display = “none”;n }n if (y.style.display == “none”) {n y.style.display = “block”;n }n else {n y.style.display = “none”;n }n if (z.style.display == “none”) {n z.style.display = “block”;n }n else {n z.style.display = “none”;n }n }n”}]