S. U. Belgamwar
Sujit G. Gaikwad
Prasad M. Kulkarni
Chinmay H. Walvekar
Pravin S. Jetithor
- Assistant Professor, Department of Mechanical Engineering, NBN Sinhgad Technical Institutes Campus, Pune, Maharashtra, India
- Student, Department of Mechanical Engineering, NBN Sinhgad Technical Institutes Campus, Pune, Maharashtra, India
- Student, Department of Mechanical Engineering, NBN Sinhgad Technical Institutes Campus, Pune, Maharashtra, India
- Student, Department of Mechanical Engineering, NBN Sinhgad Technical Institutes Campus, Pune, Maharashtra, India
- Student, Department of Mechanical Engineering, NBN Sinhgad Technical Institutes Campus, Pune, Maharashtra, India
Abstract
Rapid prototyping, commonly referred to as 3D printing or additive manufacturing (AM), is the process of creating three-dimensional objects by layer-by-layer addition of material. It is very different from subtractive and conventional forming techniques. The goal of this special issue is to gather research and advancements in additive manufacturing (AM), with an emphasis on novel manufacturing techniques and substitute products and materials for feedstock. Although metal and polymer-based materials have been thoroughly studied in additive manufacturing (AM) methods, there is growing interest in the use of composite, glass, and ceramic materials in both creative and commercial AM processes. The final qualities and performance of AM products are largely determined by the material compositions and processing techniques used to shape and finish them.
Keywords: Additive Manufacturing (AM), Fused Deposition Modeling (FDM), Filament, Feeder System, conventional forming techniques.
[This article belongs to International Journal of Electrical Power and Machine Systems(ijepms)]
Browse Figures
References
- Aamer Nazir, Ozkan Gokcekaya, Kazi MdMasumBillah, Onur Ertugrul, Jingchao Jiang, Jiayu Sun, Sajjad Hussain, “Multi-material additive manufacturing: A systematic review of design, properties, applications, challenges, and 3D printing of materials and cellular metamaterials”, Materials & Design, Volume 226, February 2023, 111661.
- Márton Tamás Birosz, Dániel Ledenyák, Mátyás Andó, “Effect of FDM infill patterns on mechanical properties” Polymer Testing, Volume 113, September 2022, 107654.
- John Solomon, P. Sevvel, J. Gunasekaran, “A review on the various processing parameters in FDM”, Materials Today: Proceedings, Volume 37, Part 2, 2021, Pages 509–514.
- Xing Peng, Lingbao Kong, Jerry Ying Hsi Fuh and Hao Wang, “A Review of Post-Processing Technologies in Additive Manufacturing”, Manufacturing and Materials Processing, 2021, 5, 38.
- Eda Hazal Tümer and Husnu Yildirim Erbil, “Extrusion-Based 3D Printing Applications of PLA Composites:A Review”, Coatings 2021, 11, 390.
- Abdullah Alfaify, Mustafa Saleh, Fawaz M. Abdullah and Abdulrahman M. Al-Ahmari, “Design for Additive Manufacturing: A Systematic Review”, Sustainability, 2020, 12, 7936.
- salem, h.abouchadi, k. El bikri, “design for additive manufacturing”, Journal of Theoretical and Applied Information Technology, 15th October 2020, vol.98. No 19.
- Zocca A, Wilbig J, Waske A, Günster J, Widjaja MP, Neumann C, Clozel M, Meyer A, Ding J, Zhou Z, Tian X. Challenges in the technology development for additive manufacturing in space. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers. 2022 Mar 1;1(1):100018.
- Javaid M, Haleem A. Using additive manufacturing applications for design and development of food and agricultural equipments. International Journal of Materials and Product Technology. 2019;58(2-3):225–38.
- Murr LE, Johnson WL. 3D metal droplet printing development and advanced materials additive manufacturing. Journal of Materials Research and Technology. 2017 Jan 1;6(1):77–89.
| Volume | 01 | |
| Issue | 01 | |
| Received | September 19, 2023 | |
| Accepted | October 10, 2023 | |
| Published | December 16, 2023 |