Amit Pathak
Anoop H. Budhrani
Alpesh S. Adeshara
Hardik M. Pandya
Deepak M. Varu
- Assistant Professor, Electrical Engineering Department, Vyavasayi Vidya Pratishthan (VVP) Engineering College, Rajkot, Gujarat, India
- Assistant Professor, Electrical Engineering Department, Vyavasayi Vidya Pratishthan (VVP) Engineering College, Rajkot, Gujarat, India
- Associate Professor, Electrical Engineering Department, Vyavasayi Vidya Pratishthan (VVP) Engineering College, Rajkot, Gujarat, India
- Assistant Professor, Electrical Engineering Department, Vyavasayi Vidya Pratishthan (VVP) Engineering College, Rajkot, Gujarat, India
- Assistant Professor, Electrical Engineering Department, Vyavasayi Vidya Pratishthan (VVP) Engineering College, Rajkot, Gujarat, India
Abstract
The rapid growth in energy demand poses a fundamental challenge for the whole power industry in fulfilling the increased demand. An exhaustive energy audit recommends substituting energy-efficient gadgets with conventional ones, which function with low efficiency and waste a significant amount of electricity. Electric motors are quite common in contemporary life, providing energy to a wide range of devices, including both domestic and industrial machinery. Nevertheless, they bear the responsibility for substantial energy usage, amounting to as much as 40% of worldwide power consumption. Hence, it is imperative to enhance the efficacy of electric motors to decrease energy consumption and the corresponding emissions of greenhouse gases. This study will analyse the key elements associated with the design of energy-efficient electrical motors. Furthermore, this document will examine several prevalent variants of electric motors, encompassing their structure, properties, and practical uses.
Keywords: Electrical motor, energy-efficient, efficiency, economical, motor design
[This article belongs to International Journal of Electrical Machine Analysis and Design(ijemad)]
References
Pritish Kumar Ghosh, Pradip Kumar Sadhu, Raju Basak, Amarnath Sanyal. Energy efficient design of three phase induction motor by water cycle Algorithm, Ain Shams Engineering Journal 2020; 11 (4) 1139–1147.
Prakht, Vladimir, Mohamed N. Ibrahim, and Vadim Kazakbaev. 2023. “Energy Efficiency Improvement of Electric Machines without Rare-Earth Magnets” Energies 16, no. 8: 3573. https://doi.org/10.3390/en16083573
Zhu, Guojin, Yu Ding, and Yajun Cao. 2023. “The Effect of Block-Matrix Interface of SRM with High Volumetric Block Proportion on Its Uniaxial Compressive Strength” Applied Sciences 13, no. 6: 3463. https://doi.org/10.3390/app13063463
Husnayain, Faiz, Toshihiko Noguchi, Ryosuke Akaki, and Feri Yusivar. 2023. “Improved Current and MTPA Control Characteristics Using FEM-Based Inductance Maps for Vector-Controlled IPM Motor” Energies 16, no. 12: 4712. https://doi.org/10.3390/en16124712
Gonzalez-Abreu, Artvin-Darien, Roque-Alfredo Osornio-Rios, Arturo-Yosimar Jaen-Cuellar, Miguel Delgado-Prieto, Jose-Alfonso Antonino-Daviu, and Athanasios Karlis. 2022. “Advances in Power Quality Analysis Techniques for Electrical Machines and Drives: A Review” Energies 15, no. 5: 1909. https://doi.org/10.3390/en15051909
Shokoohi and H. Bevrani, “PSO based droop control of inverter interfaced distributed generations,” 2013 Smart Grid Conference (SGC), Tehran, Iran, 2013, pp. 204–209, doi: 10.1109/SGC.2013.6733809.
-H. Kim, H. -D. Jun, J. -W. Moon, R. -E. Kim, S. -H. Rhyu and S. -Y. Jung, “Motor Efficiency Determination of SynRM and Measurement Uncertainty,” 2019 International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) & 2019 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), Istanbul, Turkey, 2019, pp. 233–239, doi: 10.1109/ACEMP-OPTIM44294.2019.9007174.
Hanitsch R. Energy efficient electric motors. Energy. 2002; 645:227.
Raj CT, Srivastava SP, Agarwal P. Energy Efficient Control of Three-Phase Induction Motor-A Review. International journal of computer and electrical engineering. 2009 Apr 1;1(1):61.
| Volume | 01 |
| Issue | 01 |
| Received | December 13, 2023 |
| Accepted | December 20, 2023 |
| Published | January 18, 2024 |