Comprehensive Review of EPDM (Ethylene Propylene Diene Monomer) Rubber

Year : 2025 | Volume : 12 | Issue : 02 | Page : 27 34
    By

    Sandeep Rai,

  • Pradeep Uthale,

  1. General Manager, R&D, Dyne Chemicals LLP, 3312/18, Chhatral GIDC, Phase-IV, Taluka – Kalol, District – Gandhinagar, Gujarat, India

Abstract

The terpolymer elastomer known as ethylene propylene diene monomer (EPDM) is made up of ethylene and propylene with trace amounts of a non-conjugated diene as a third monomer. This elastomer was created using the idea of limited olefinic functionality, which is brought about by diene monomer incorporating unsaturation into the polymer backbone. This random elastomeric copolymer, which has a fully saturated polymer backbone, has intriguing qualities such as good heat resistance and weathering stability, good insulating qualities, and good resistance to chemicals, moisture, and steam. The synthetic elastomer known as Ethylene Propylene Diene Monomer (EPDM) rubber is a member of the thermoset rubber family. It is extensively utilized in a variety of industries, including roofing, electrical, construction, and automobiles. EPDM exhibit exceptional resistance to weathering, aging, and extreme temperatures, along with good electrical insulating properties and resistance to water, ozone, and harsh chemicals. This review aims to provide an in-depth understanding of EPDM, including its composition, manufacturing process, properties, applications, and future prospects.

Keywords: EPDM, Rubber, Weather Resistance, Roofs, Solution Polymerization

[This article belongs to Emerging Trends in Chemical Engineering ]

How to cite this article:
Sandeep Rai, Pradeep Uthale. Comprehensive Review of EPDM (Ethylene Propylene Diene Monomer) Rubber. Emerging Trends in Chemical Engineering. 2025; 12(02):27-34.
How to cite this URL:
Sandeep Rai, Pradeep Uthale. Comprehensive Review of EPDM (Ethylene Propylene Diene Monomer) Rubber. Emerging Trends in Chemical Engineering. 2025; 12(02):27-34. Available from: https://journals.stmjournals.com/etce/article=2025/view=206235


References

  1. Malas, A.; Das, C.K. Carbon black–clay hybrid nanocomposites based upon EPDM elastomer. Mater. Sci. 2012, 47, 2016–2024. [CrossRef]
  1. Nazir, M.T.; Phung, B.T.; Sahoo, A.; Yu, S.; Zhang, Y.; Li, S. Surface Discharge Behaviours, Dielectric and Mechanical Properties of EPDM based Nanocomposites containing Nano-BN. Nanosci. 2019, 9, 1981–1989. [CrossRef]
  2. Nazir, M.T.; Butt, F.T.; Phung, B.T.; Yeoh, G.H.; Yasin, G.; Akram, S.; Bhutta, M.S.; Hussain, S.; Nguyen, T.A. Simulation and Experimental Investigation on Carbonized Tracking Failure of EPDM/BN-Based Electrical Insulation. Polymers 2020, 12, 582. [CrossRef] [PubMed]
  3. Nazir, M.T.; Phung, B.T.; Kabir, I.; Yuen, A.C.Y.; Yeoh, G.H.; Zhang, Y.; Yu, S.; Li, S. Investigation on Dry Band Arcing Induced Tracking Failure on Nanocomposites of EPDM Matrix. In Proceedings of the 2019 2nd International Conference on Electrical Materials and Power Equipment (ICEMPE), Guangzhou, China, 7–10 April 2019; IEEE: Piscataway, NJ, USA, 2019; pp. 309–312.
  4. Ahamad, A.; Kumar, P. Effect of Reinforcing Ability of Halloysite Nanotubes in Styrene-Butadiene Rubber Nanocomposites. Commun. 2020, 22, 100440. [CrossRef]
  5. Attia, N.F.; Saleh, B.K. Novel Synthesis of Renewable and Green Flame-Retardant, Antibacterial and Reinforcement Material for Styrene–Butadiene Rubber Nanocomposites. Therm. Anal. Calorim. 2020, 139, 1817–1827. [CrossRef]
  6. Silva, M.J.; Sanches, A.O.; Cena, C.R.; Nagashima, H.N.; Medeiros, E.S.; Malmonge, J.A. Study of the Electrical Conduction Process in Natural Rubber-Based Conductive Nanocomposites Filled with Cellulose Nanowhiskers Coated by Polyaniline. Compos. 2020, 42, 1519–1529. [CrossRef]
  7. Silva, M.J.; Cena, C.R.; Sanches, A.O.; Mattoso, L.H.C.; Malmonge, J.A. DBSA to Improve the Compatibility, Solubility, and Infusibility of Cellulose Nanowhiskers Modified by Polyaniline in Reinforcing a Natural Rubber-Based Nanocomposite. Bull. 2019, 76, 3517–3533. [CrossRef]
  8. Silva, M.J.; Dias, Y.J.; Zaszczyn´ska, A.; Kołbuk, D.; Kowalczyk, T.; Sajkiewicz, P.Ł.; Yarin, A.L. Three-phase bio-nanocomposite natural-rubber-based microfibers reinforced with cellulose nanowhiskers and 45S5 bioglass obtained by solution blow spinning.
    1. Polym. Sci. 2023, 140, e54661. [CrossRef]
  1. Stelescu, M.D.; Manaila, E.; Georgescu, M.; Nituica, M. New Materials Based on Ethylene Propylene Diene Terpolymer and Hemp Fibers Obtained by Green Reactive Processing. Materials 2020, 13, 2067. [CrossRef]
  2. Razak, J.; Mohamad, N.; Mahamood, M.A.; Jaafar, R.; Othman, I.S.; Ismail, M.M.; Tee, L.K.; Junid, R.; Mustafa, Z. On the Preparation of EPDM-g-MAH Compatibilizer via Melt-Blending Method. Mech. Eng. Sci. 2019, 13, 5424–5440. [CrossRef]
  3. Abdel-Aziz, M.M.; Amer, H.A.; Atia, M.K.; Rabie, A.M. Effect of Gamma Radiation on the Physicomechanical Characters of EPDM Rubber/Modified Additives Nanocomposites. Vinyl Addit. Technol. 2017, 23, E188–E200. [CrossRef]
  4. Ismail, H.; Che Mat, N.S.; Othman, N. Curing Characteristics, Tear, Fatigue, and Aging Properties of Bentonite-filled Ethylenepropylene-diene (EPDM) Rubber Composites. Vinyl Addit. Technol. 2018, 24, E77–E84. [CrossRef]
  5. Jahed, M.; Naderi, G.; Hamid Reza Ghoreishy, M. Microstructure, Mechanical, and Rheological Properties of Natural Rubber/Ethylene Propylene Diene Monomer Nanocomposites Reinforced by Multi-wall Carbon Nanotubes. Compos. 2018, 39, E745–E753. [CrossRef]
  6. Fazli A, Rodrigue D. Waste rubber recycling: A review on the evolution and properties of thermoplastic elastomers. Materials. 2020 Feb 8;13(3):782.
  7. Karpeles R, Grossi AV. EPDM Rubber technology. InHandbook of elastomers 2000 Nov 2 (pp. 863-894). CRC Press.
  8. Technology Profile: Production of EPDM Rubber, Intratec Solutions, April 1, 2022 https://www.chemengonline.com/technology-profile-production-of-epdm-rubber/
  9. Salimi A, Abbassi-Sourki F, Karrabi M, Ghoreishy MH. Investigation on viscoelastic behavior of virgin EPDM/reclaimed rubber blends using Generalized Maxwell Model (GMM). Polymer Testing. 2021 Jan 1;93:106989.
  10. Hough P, van der Aar N, Qiu Z. Compounding and mixing methodology for good performance of EPDM in tire sidewalls. Tire Science and Technology. 2020 Jan 1;48(1):2-1.
  11. Ciesielski A. An introduction to rubber technology. iSmithers Rapra publishing; 1999..
  12. Study on Increasing Vulcanization Rate of Ethylene-propylene Rubber, Kun Zhou 2019 IOP Conf. Ser.: Mater. Sci. Eng. 585 012045
  13. Sisanth KS, Thomas MG, Abraham J, Thomas S. General introduction to rubber compounding. InProgress in rubber nanocomposites 2017 Jan 1 (pp. 1-39). Woodhead Publishing..
  14. De SK, White JR, editors. Rubber technologist’s handbook. iSmithers Rapra Publishing; 2001.
  15. Chandrasekaran vc. Rubber as a construction material for corrosion protection: a comprehensive guide for process equipment designers. John wiley & sons; 2010 dec 13.
  16. Noordermeer JW. Recent advances in sponge technology of EPDM-rubber in automotive weatherstrips: A review. Cellular polymers. 1997 Sep;16(5):331-48.
  17. Zhao Q, Li X, Gao J. Aging of ethylene–propylene–diene monomer (EPDM) in artificial weathering environment. Polymer Degradation and Stability. 2007 Oct 1;92(10):1841-6.
  18. Burger K, Smit HP. The natural rubber market: review, analysis, policies and outlook.
Regular Issue Subscription Review Article
Volume 12
Issue 02
Received 24/03/2025
Accepted 27/03/2025
Published 06/04/2025
Publication Time 13 Days
206

Login


My IP

PlumX Metrics