Share 0
Post 0

Section Editor’s Profile

Profile Image

Prof. Mohsen Mhadhbi

Designation : Associate Professor

Affiliation : National Institute of Research and Physicochemical Analysis Ariana, TN, Tunisia, 2020

Expertise: Structural Materials & Mechanical Properties

Institution Profile Link :

Offical Email :

Personal Email :

Role: Section Editor

Journal: Journal of Materials & Metallurgical Engineering

About Me

Associate Professor in Laboratory of Useful Materials at
National Institute of Research and Physicochemical Analysis, Ariana, TN, Tunisia
My expertise are Structural Materials & Mechanical Properties

Recent Publications

1. Mohsen Mhadhbi, Mohamed Khitouni, Myriam Azabou and Abdelwaheb Kolsi,
Characterization of Al and Fe powders synthesized by high energy mechanical milling,
Materials Characterization 59 (2008) 944 – 950.
2. M. Mhadhbi, M. Khitouni, L. Escoda, J.J. Suñol, X-ray studies of structure defects in
nanostructured FeAl alloy, Materials Letters 64 (2010) 1802-1805.
3. M. Mhadhbi, M. Khitouni, L. Escoda, J.J. Suñol, M. Dammak, Microstructure evolution
and mechanical properties of nanocrystalline FeAl obtained by mechanical alloying and cold
consolidation, Journal of Alloys and Compounds 509 (2011) 3293-3298.
4. M. Mhadhbi, M. Khitouni, L. Escoda, J.J. Suñol, M. Dammak, Characterization of
mechanically alloyed nanocrystalline Fe(Al): Crystallite size and dislocation density, Journal
of Nanomaterials, 2010 (2010) 1-8.
5. M. Mhadhbi, M. Khitouni, L. Escoda, J.J. Suñol, Recovery, grain growth and
recrystallization of mechanically alloyed FeAl alloy, Materials Science and Engineering, 13
(2010) 1-5.
Curriculum Vitae of Mohsen MHADHBI Page 4
6. Mohamed Khitouni, Rakia Daly, Mohsen Mhadhbi, Abdelwaheb Kolsi, Structural
evolution in nanocrystalline Cu obtained by high energy mechanical milling: Phase
formation of copper oxides, Journal of Alloys and Compounds 475 (2008) 581-586.
7. M. Mhadhbi, J.J. Suñol, M. Khitouni, Influence of heat treatments on the structure of
FeAl powders mixture obtained by mechanical alloying, Physics Procedia 40 (2013) 38-44.
8. M. Krifa, M. Mhadhbi, L. Escoda, J. Saurina, J.J. Suñol, N. Llorca-Isern, C. ArtiedaGuzmán, M. Khitouni, Nanocrystalline (Fe60Al40)80Cu20 alloy prepared by mechanical
alloying, Journal of Alloys and Compounds 554 (2013) 51–58.
9. M. Krifa, M. Mhadhbi, L. Escoda, J. Saurina, J.J. Suñol, N. Llorca-Isern, C. ArtiedaGuzmán, M. Khitouni, Phase transformations during mechanical alloying of Fe–30%Al–
20%Cu, Powder Technology 246 (2013) 117–124.
10. Abderrahmene SEKRI, Mohsen MHADHBI, Luiza ESCODA, Juan Josep SUÑOL,
Mohamed KHITOUNI, Thabet MAKHLOUF, Synthesis and structural characterization of
nanocrystalline Fe-Ni-Zr-B alloy prepared by powder metallurgy, Journal of the Tunisian
Chemical Society, 2015, 17, 49-56.
11. M. Masmoudi, M. Mhadhbi, L. Escoda, J.J. Suñol, M. Khitouni, Microstructural
evolution and corrosion behavior of nanocrystalline FeAl synthesized by mechanical
alloying, Journal of Alloys and Compounds 657 (2016) 330-335.
12. Mohsen Mhadhbi, Book on Phase Change Materials and Their Applications, IntechOpen
Science (2018).
13. Eleonora Santecchia and Mohsen Mhadhbi, Book Chapter on “Introductory Chapter:
The new era of sintering”. IntechOpen Science (2018).
14. Mohsen Mhadhbi, Editorial, Ti-based Alloys for Biomedical Applications, Current
Scientific Research in Biomedical Sciences Vol.2 (1) April 09, 2019.
15. Mhadhbi M., “Ceramics in Dentistry”. Curr Sci Res Biomed Sciences 2020, 3(2): 180016.
16. Mohsen Mhadhbi, “Nanotechnology Versus Coronavirus”, MAR Case Reports 1.5(2020).
17. Mohsen Mhadhbi, “Dental Ceramics”, MAR Case Reports 1.6 (2020).
18. Mohsen Mhadhbi, “Relationship Between the Diffraction Peak Intensity and
Composition in (Ti1-xWx)C Powders”, Global Research and Development Journal for Engineering,
Volume 5, Issue 12, November 2020: ISSN- 2455-5703.
19. Mohsen Mhadhbi and Miloud Driss, Review on Titanium carbide: Synthesis, Proprieties
and Applications, Journal of Brillilant Engineering, 2 (2021) 1-11.
20. Mohsen Mhadhbi. “The Nanotechnology Revolution in Human Health”. EC Emergency
Medicine and Critical Care 4.9 (2020): 08-20.
21. Mohsen Mhadhbi, “Modelling of the High-Energy Ball Milling Process”, Advances in
Materials Physics and Chemistry, 2021, 11, 31-44, https://doi.org/10.4236/ampc.2021.111004.
22. Mohsen Mhadhbi, “Structural and Morphological Studies of Nanostructured TiC
Powders Prepared by Mechanical Alloying”, Modern Approaches on Material Science, 3(5)-
2021. MAMS.MS.ID.000174. DOI: 10.32474/MAMS.2021.03.000174.
23. Mohsen Mhadhbi, Faïçal Khlissa and Chaker Bouzidi, Chapter on “Recent Advances in
Ceramic Materials for Dentistry”, IntechOpen Science, 2021 pp 1-29. DOI:
http://dx.doi.org/10.5772/intechopen.96890.
24. Mohsen Mhadhbi and Khalil Khamassi. “Nanotechnology against COVID-19”. EC
Emergency Medicine and Critical Care 5.4 (2021): 98-106.
25. Mohsen Mhadhbi, Book on “Ceramic Materials”, IntechOpen Science, 2021.
List of communications
1. M. Mhadhbi, R. Daly, M. Khitouni, A.W. Kolsi, Characterization of the nanosrtuctured
Fe, Al and Cu powders elaborated by high-energy mechanical milling. 14th National Days of
Chemistry, from 18 to 21 December 2006 at the Sol Azur Beach Hotel in Hammamet,Tunisia.
Curriculum Vitae of Mohsen MHADHBI Page 5
2. M. Mhadhbi, M. Khitouni, M. Azabou, A.W. Kolsi, Characterization of Al and Fe
nanosized powders synthesized by high-energy mechanical milling. 2nd Tunisian conference on
Materials, from 7 to 10 April 2007 at the Abou-Nawas Hotel in Hammamet, Tunisia.
3. Mohsen Mhadhbi, Mohamed Khitouni, Abdelwaheb Kolsi, Synthesis of bulk Fe40at.%Al nanostructured materials by high energy mechanical milling followed by cold
pressing consolidation. XI Maghrebian days of materials sciences, from 4 to 8 November 2008 at the
Hotel Vincci Nour Palace Hotel in Mahdia, Tunisia.
4. M. Mhadhbi, M. Khitouni, L. Escoda, J.J. Suñol, A.W. Kolsi, The mechanism of
nanocrystalline structure formation during mechanical alloying followed by cold
consolidation of Fe-40at.%Al. 2
nd
International Days of the physics of materials and Applications,
JIPMA 2009, from 20 to 24 December 2009 at the Hotel Jugurtha Palace hotel in Gafsa, Tunisia
5. M. Mhadhbi, M. Khitouni, L. Escoda, J.J. Suñol, M. Dammak, Microstructural studied of
the mechanically alloyed FeAlCu alloy. 16th National Days of Chemistry, from 19 to 22 December
2010, at the Laico Hotel in Yasmine Hammamet, Tunisia.
6. M. Mhadhbi, M. Khitouni, L. Escoda, J.J. Suñol, A.W. Kolsi, Microstructure evolution
after thermal treatments of nanocrystalline Fe(Al) prepared by mechanical alloying. 3th
International Days of the Physics of Materials and Applications, from 04 to 07 November 2010, at the
Hotel Thalassa Mahdia, Tunisia.
7. M. Mhadhbi, M. Khitouni, L. Escoda, J. J. Suñol, M. Dammak, Microstructure evolution
and mechanical properties of nanocristalline FeAl powders obtained by mechanical alloying
and cold consolidation. The First International Conference on “Research to Applications Markets”,
from 23 to 25 June 2011 in Monastir, Tunisia.
8. M. Mhadhbi, J.J. Suñol, M. Khitouni, Influence of heat treatments on the structure of
FeAl powders mixture obtained by mechanical alloying. European Conference on NanoFilms 2
(ECNF 2012), from 17 to 21 June 2012 in Ancona, Italy.
9. M. Mhadhbi, J.J. Suñol, M. Khitouni, Hardening and softening of FeAl powders during
mechanical alloying followed by cold consolidation and annealing. 17th National Days of
Chemistry, organized by Tunisian Chemical Society from 17 to 19 December 2012 at the Amir Palace
Hotel in Monastir, Tunisia.
10. M. Krifa, M. Mhadhbi, L. Escoda, J.J. Suñol, M. Khitouni, Phases transformations and
magnetic properties of nanocrystalline mechanically alloyed Fe-Al-Cu. 17th National Days of
Chemistry, organized by Tunisian Chemical Society from 17 to 19 December 2012 at the Amir Palace
Hotel in Monastir, Tunisia.
11. S. Kallel, M. Mhadhbi, L. Escoda, J.J. Suñol, M. Khitouni, Structural evolution in Ti3AlB alloy obtained by mechanical alloying. 17th National Days of Chemistry, organized by Tunisian
Chemical Society from 17 to 19 December 2012 at the Amir Palace Hotel in Monastir, Tunisia.
12. M. Mhadhbi, J.J. Suñol, M. Khitouni, Effect of annealing temperature on the structural
and magnetic properties of nanocrystalline Fe-Al powders fabricated by mechanical alloying.
«Third Tunisian Cristallographic Meeting: TCM3» organized by the Tunisian Association of
Crystallography, from 07 to 09 April 2013 at the Amir Palace Hotel in Monastir, Tunisia.
13. M. Mhadhbi, J.J. Suñol, M. Khitouni, Magnetic properties of FeAl powders produced by
mechanical alloying and annealing. Eighth International Conference on magnetic and
Superconducting Materials MSM 13, from 01 to 05 September 2013 at the Mouradi Hotel, in
Hammamet, Tunisia.
14. M. Mhadhbi and M. Abdellaoui, Synthesis and structural characterization of
nanocrystalline LaNi4.7Al0.3 alloy prepared by mechanical alloying. International Conference
and Exhibition on Nanoscience and Nanotechnology “NANOTECH TUNISIA 2014”: From 24 to 26
April 2014 at the Royal Hotel in Hammamet, Tunisia.
Curriculum Vitae of Mohsen MHADHBI Page 6
15. M. Mhadhbi, G. Jomaa, M. Abdellaoui, Characterization of CaAl2 powders synthesized
by mechanical alloying of elemental Ca and Al, Fifth Conference on Materials organized by
Tunisian Materials Research Society: Tu-MRS, from 22 to 26 Mars 2015, at Nour Palace Hotel in
Mahdia, Tunisia.
16. M. Mhadhbi, Fabrication of nanocrystalline TiCrC powders by mechanical alloying, The
Third International Conference on Research to Applications and Markets: From 16 to 18 September
2016, at the Mehari Hotel in Hammamet, Tunisia.
17. Mohsen MHADHBI Fabrication of dental prostheses from metal alloys, 2nd seminarcompetition of the best innovative projects in Biotechnology of health and well-being: from 24 to 26
November 2016, at the Mehari Hotel in Hammamet, Tunisia.
18. Mohsen Mhadhbi, Comparative study of TiC and TiCrC carbides produced by
mechanical alloying, African and Francophone Congress on Analytical Sciences and Applications:
from 27 to 30 November 2017, at the Radisson Blu Hotel in Hammamet, Tunisia.
19. Mohsen MHADHBI, Microstructural changes in nanocrystalline (Ti0.9Cr0.1)C powders
obtained by mechanical alloying, 8th International Solid State Chemistry Conference 17-20
December 2017 – Royal Thalassa Monastir Hotel, Skanes-Monastir, Tunisia.
20. Mohsen MHADHBI, Modeling of the planetary ball milling process for the case of TiC
powder, 8th International Solid State Chemistry Conference 17-20 December 2017 – Royal Thalassa
Monastir Hotel, Skanes-Monastir, Tunisia.
21. Mohsen MHADHBI, Houyem ABDERAZZAK, Mechanism of synthesizing
nanocrystalline TiCrC powders in different milling atmospheres, Tunisia Chemistry
Conference (TCC) 16-20 December 2018 – Bel Azur Hotel, Hammamet, Tunisia.
22. Mohsen MHADHBI, Mohamed KHITOUNI, Relationship between the diffraction peak
intensity and composition in (Ti1-xWx)C powders, Tunisia Chemistry Conference (TCC) 16-
20 December 2018 – Bel Azur Hotel, Hammamet, Tunisia.
23. Mohsen MHADHBI, 6th Thematic School on the “Surfaces and Interfaces: Applications to
Sensors”, From 8 to 9 March 2019 at the Higher Institute of Computer Science and Mathematics,
Monastir- Tunisia.
24. Mohsen Mhadhbi, Houyem Abderazzak, Microstructural changes of nanocrystalline
NbC0.93 powders prepared by high-energy ball milling, 4th International Symposium on
Materials and Sustainable Development (ISMSD2019), From 12 to 14 November 2019 in
Boumerdes, Algeria.
25. Mohsen Mhadhbi, “Phase Change Material for Energy Storing”, AFRICA DAY 2020, 7th
November 2020, Jena Germany Digital International Transdisciplinary Conference on Africa (ITCA
2020).
26. Mohsen Mhadhbi, Frédéric Schoenstein, Noureddine Jouini, “Analysis of TiC-based
Alloys Prepared by Mechanical Alloying and Spark Plasma Sintering”, LECO Analytical
Applications Poster Competition 2020.

Support