Editor’s Profile
Dr. Sumant K. Kulkarni
Designation : Professor
Affiliation : REVA University, Bangalore karnataka, India, 560064
Expertise: Chemical Engineering
Institution Profile Link : https://www.reva.edu.in/school-member/sumant-khanderao-kulkarni
Offical Email :
Personal Email :
Role: Editor
Journal: Journal of Materials & Metallurgical Engineering
About Me
Professor in School of Civil Engineering at
REVA University, Bangalore, karnataka, India
My expertise are Chemical Engineering
Recent Publications
Seminars, Short-term Training Programmes and Workshops attended:
• Structural Analysis and Design of Structures – 1-11 July 2008 organized by VNIT, Nagpur.
(India)
• Provisions in IS-456 (Revised 2000) and its Implications held at RSCOE, Pune (India).
• IS 800-2007 Indian Standard General Construction in Steel- Code of Practice (Third Revision)
organized by INSDAG, Kolkata at Mumbai (India) on 17-18 November 2008
• Engineering Mechanics- Effective Teaching Methodology organized on 8th & 9th of January
2009 held at VIIT, Kondhwa, Pune (India).
• Planning Aspects for a Project: Concept to Completion organized by Civil Engineering Dept.,
SCOE, Pune (India) on 7th and 8th March 2009.
• National Workshop on “Design of Steel Structures using Revised IS 800: 2007” organized by
Department of Civil Engineering, SCOE, Pune (India) from 30th June to 04th July 2009.
• A Two day symposium on Pre Engineered Buildings (PEB) organized by SCOE, Pune (India)
in association with Tata Bluescope Steel Limited on 25th and 26th July 2009.
• Delivered a lecture on ANSYS Tutorials for Faculty Development Programme on Finite
Element Analysis at Sinhgad College of Engineering, Pune (India) in December 2013.
• Invited as a Resource Person for guest lecture on “Introduction of IS:800-2007 based on Limit
State Method” in Sinhgad Academy of Engineering, Pune (India).
• Successfully completed a Five Week online non-credit course “Mechanics of Materials III:
Beam Bending” authorized by Georgia Institute of Technology and offered through Coursera
06/06/2020.
• Successfully completed a Ten Days “Online Certification of HIT-Office Construction ERP
for Civil Engineering” conducted by Engineering Design Software and Services Pvt. Ltd.
14/01/2022.
• Presided as Session Chair for the technical session on Structural Engineering at 6th
International Conference on “Smart materials for Sustainable Construction in Civil Engineering”
(ICSMSCE-2022), held during 08th and 09th July 2022.
• Delivered a keynote lecture on “Research Methodology and Interpretation of Results” during
Five Days Faculty Development Programme on Research Awareness and Research Ethics,
held between 18th to 22nd July 2022.
Seminars, Short-term Training Programmes and Workshops conducted:
• Conducted a short-term training programme on ANSYS software in Sinhgad College of
Engineering, Pune (India) dated 20 August to 17 September 2011for M.E. (Structure) Students.
(Role – Coordinator)
• Conducted Two Day State Level Workshop from 04 to 05 June 2017 on Application of Finite
Element Methods in Structural Engineering at Flora Institute of Technology, Pune (India).
(Sponsored by Savitribai Phule Pune University, Pune, India) (Role – Convener)
• Conducted Civil-PGCON 2017 from 13 to 14 June 2017 at Flora Institute of Technology, Pune
(India) at University Level (Savitribai Phule Pune University, Pune, India). (Role – Convener)
• Conducted Two Day National Level Workshop from 01/03/2019 to 02/03/2019 on
Applications of Structural Audit in Civil Engineering at D. Y. Patil Institute of Engineering &
Technology, Ambi, Pune (India) (Sponsored by Savitribai Phule Pune University, Pune, India)
(Role – Convener)
• Conducted International Conference on Insights in Mechanical and Civil Engineering
(ICIMCE) 2019 from 26 to 27 April 2019 (Role – Convener)
• Conducted International Conference on Sustainable Materials and Practices for Advanced
Research in Civil Engineering (SMPARCE 2024) from 12 to 13 July 2024 (Role – Convener)
Technical Reviewer:
•Journal of The Institution of Engineers – India (Series A) (Springer Journal)
• Forensic Engineering (Proceedings of the ICE)
• Materials Today Proceedings (Elsevier Journal)
• Reviewed numerous manuscripts in various International Conferences from April 2019.
Publications:
• S. K. Kulkarni and M. R. Shiyekar, “Elastic Properties of RCC under Flexural Loading”,
Proceedings of International Conference on Computational Solids and Mechanics ICCMS’09,
IIT, Bombay, 1-5 December 2009.
• S. K. Kulkarni, M. R. Shiyekar and B. Wagh, “Elastic Properties of RCC under Flexural
Loading”, International Journal of Modern Engineering Research, 2(6), November December
2012, pp 4022-4025. (Citations 6)
• S. K. Kulkarni, M. R. Shiyekar and B. Wagh, “Elastic Properties of RCC under Flexural
Loading-FE Approach”, World Research Journal of Civil Engineering, 2(1), 2012, pp 30-33.
(Citations 1)
• S. K. Kulkarni and M. R. Shiyekar, “Elastic Properties of RCC under Axial Loading”,
International Journal of Engineering Associates, February 2012, pp 58-62.
• H. R. Kochar and S. K. Kulkarni, “Lateral Torsional Buckling of Steel Beam”, International
Journal of Computational Engineering Research, 2(6), October 2012, pp 178-181. (Citations 5)
• S. K. Kulkarni, M. R. Shiyekar, S. M. Shiyekar and B. Wagh, “Elastic Properties of RCC under
Flexural Loading- Experimental and Analytical Approach”, Sadhana Academy Proceedings in
Engineering Sciences, 30(3), 2014, pp 677-688. (Scopus Springer Journal) (Citations 11)
• S. S. Kulaskar and S. K. Kulkarni, “Confinement Effect on Flexural Design of RCC Beams”,
International Journal for Science Research in Technology, 1(5), 2015, pp 282-287.
• S. Khalate and S. K. Kulkarni, “Finite Element Analysis of Cold Formed Steel Bolted
Connection”, International Journal of Recent Technology and Engineering, 4(3), 2015, pp 23-
28. (Citations 2)
• Jadhav S. K. Kulkarni and A. A. Galatage, “Comparison of Effect of Earthquake and
Wind Loads on Performance of RC Framed Shear Wall Building with its Different Orientation”,
International Journal Of Advance Research And Innovative Ideas In Education, 2(6), 2016, pp
314-319 (Citations 3)
• N. C. Gaikwad, A. A. Galatage and S. K. Kulkarni, “Scaling of ground motions for performing
incremental dynamic analysis of RC framed structures”, Int. J. Adv. Res. Ideas Innov. Technol.,
3, 2017, pp. 56-68. (Citations 7)
• S. S. Shinde, A. A. Galatage and S. K. Kulkarni, “Evaluation seismic efficiency of
combination of bracing for steel building”, IJARIIT, 2017, pp. 46-55. (Citations 3)
• S. K. Kulkarni, M. R. Shiyekar and S. M. Shiyekar, “Confinement Effect on Material Properties
of RC Beams under Flexure”, Journal of The Institution of Engineers – India (Series A) 98(4),
2017, pp 413-428. (Scopus Springer Journal) (Citations 3)
• S. Vibhute and S. K. Kulkarni, “Analysis of Natural Frequency of Pre-stressed Steel Beam”,
International Journal for Science Research in Technology, 1(5), 2015, pp 84-88.
• A. Nadaf and S. K. Kulkarni, “Application of Quantity Surveying techniques for cost control of
building project”, International Journal of Management, Technology And Engineering, 9(1),
2019, 2221-2226. (Citations 2)
• S. Shinde and S. K. Kulkarni, “Impact of Maha-RERA Act 2016 on the Real Estate Industry”,
International Journal of Engineering Applied Sciences and Technology, 4(3), 2019, 530-532.
(Citations 7)
• A. Bagal and S. K. Kulkarni, “Monte Carlo Simulation For Project Schedule Probability
Analysis Using Excel”, International Journal of Engineering Development and Research, 7(3),
2019, 242-252. (Citations 1)
• A. Belhekar and S. K. Kulkarni, “Survey on Factors Affecting Labour Productivity of a
Construction Project”, International Journal of Research and Analytical Reviews, 6(2), 2019,
817-823.
• M. Toke and S. K. Kulkarni, “Review Paper on Implementation of Green Supply Chain- A
Coparative Analysis between Small Scale Industries in India”, International Conference on
Emerging Trends in Engineering & Sciences (ICETES), Jai Hind College of Engineering,
Kuran, 16-17 January, 2020.
• Sumant Kulkarni, “Effect of Compression Reinforcement on Modulus of Elasticity of RC
Beams under Flexure”, Materials Today Proceedings, doi.org/10.1016/j.matpr.2023.03.563,
2023. (Scopus Elsevier Journal) (Citations 2)
•Bajirao Mane, Vrushali Patil and Sumant Kulkarni, “Analysis of Slender Reinforced High
Performance Concrete Columns using ANSYS Software”, AIP Conf. Proc. 2716, 040009,
2023.(Scopus) (Citations 2)
• Sumant Kulkarni, “Performance of Steel and Polypropylene Hybrid Fiber Reinforced
Concrete”, Nova Science and Publishers, 2024, 13-34. (Scopus)
• S. K. Kulkarni, M. R. Shiyekar, S. M. Shiyekar and Z. Kangda, “Effect of Confinement on
Tension Stiffening Effect of RC Beams subjected to Flexure”, Conf. Proc. Recent Advances in
Materials Manufacturing and Machine Learning, 2024, 113-223. (Scopus)
• M.S. Bhagat, V. D. Jadhav, S. K. Kulkarni, P. Satishkumar and R. Saminathan, “Comparative
analysis of alkali-treated natural fibres for improved interfacial adhesion in composite
materials”, Interactions, 245(1), 2024, 206. (Scopus Springer Journal) (Citations 2)
• N. P. Mungle, V. D. Jadhav, S. K. Kulkarni, D. S. Vijayan, R. Saminathan and P. Satishkumar,
“Optimizing mechanical strength and thermal stability of sisal fiber-plastic composites by hightemperature treatment”, Interactions, 246(1), 2025, 1-15. (Scopus Springer Journal)
• S. K. Kulkarni and A. S. Kulkarni, “Behavior of Short Reinforced Concrete Columns with
Varying Tie Spacing and Concrete Grades Under Compression”, Proceedings of the Second
International Conference in Civil Engineering for a Sustainable Planet: ICCESP 2024, 2025,
260-269. https://doi.org/10.21467/proceedings.179.31
Copyrights:
1. “Analysis of Portal Frame using Conventional and Modified Material Property of RCC“,
Registration No. L-116472/2022 received on 29/06/2022.
2. “Seismic Analysis of Multi-Storied Residential Building without Shear Wall”,
Registration L-120019/2022 received on 22/12/2022.
3. “Prototype Model of Steel Portico”, Registration L-120019/2022 received on
19/12/2022.
4. “Effect of Staggered Column on Punching Shear in Flat Slab”, Registration L124060/2023 received on 07/06/2023.
5. “Lateral Torsional Buckling of Steel Beam of 10m Span with Tapered Web”, Registration
L-133593/2023 received on 25/09/2023.
6. “Bond Strength of Steel and Polypropylene Hybrid Fiber Reinforced Concrete”,
Registration L-134076/2023 received on 04/10/2023.
Patents:
1. “A Design of Tapered Castellated Steel Beam for Stadium Roofs and Parking Lots” Patent
Application no. 202341071774 A, patent published on 01/12/2023.
2. “A Construction Site Supervision System based on Internet of Things and Block Chain” Patent
Application number 202341078440, patent published on 23/12/2023.
3. “Investing the impact on the Elastic Modulus of RCC Beams” Patent Application number
202441060157, patent published on 09/08/2024.
4. “Effect of Tension and Compression Reinforcement on Flexural Stiffness of Reinforced
Concrete Beams” Patent Application number 202441070155 A, patent published on
17/09/2024.
Books Published:
1. Design of Concrete Structures II, Techmax Publications, 2016
2. Design of Reinforced Concrete Structures, Techmax Publications, 2016
3. Design of Steel Structure, Techmax Publications, 2016
4. Design of Steel Structure, Techmax Publications, 2017
5. Design of Steel Structures II, Techmax Publications, 2017
6. Building Technology and Materials, Techknowledge Publications, 2019
7. Design of Reinforced Concrete Structures, Techknowledge Publications, 2020
8. Theory of Reinforced Concrete Structures (Sem V), Techknowledge Publications, 2020
9. Theory of Reinforced Concrete Structures (Sem VII), Techknowledge Publications, 2020
10. Theory of Reinforced Concrete Structures (Sem V), Techknowledge Publications, 2021
11. Building Technology and Architectural Planning, Techknowledge Publications, 2021
12. Design and Drawing of Reinforced Concrete Structures, Techknowledge Publications, 2022