Share 0
Post 0

Associate Editor in Chief’s Profile

Profile Image

Prof. Pooja Bhati

Designation : Assistant Professor

Affiliation : Indira Gandhi Delhi Technical University, New Delhi Delhi, India, 110006

Expertise:

Institution Profile Link : https://pooja1380.wixsite.com/biomaterial

Offical Email :

Personal Email :

Role: Associate Editor in Chief

Journal: Journal of Thin Films, Coating Science Technology & Application

About Me

Assistant Professor in Mechanical & Automation Engineering at
Indira Gandhi Delhi Technical University, New Delhi, Delhi, India

Recent Publications

  1. Srivastava A, Aggarwal.M, Bhati P, et al “A Review on Poly-Lactic Acid-based Composite in Biomedical Engineering ” Polymer Engineering and Science Journal 2024 64(3), 1003-1044.
  2. Srivastava A, Aggarwal.M , Bhati P, et al. “Fabrication and Characterisation of PLLA/PCL/Mg-Zn-Y Alloy Composite Stent” Polymer Engineering and Science 2024 64 (1), 243-253.
  3. Chauhan P, Bhati P, et al. “Enhanced Osseointegration of Drug Eluting Nanotubular Dental Implants: An in-vitro and Invivo study” Bioactive Materials. 2023;28; 432-447
  4. Srivastava A, Aggarwal.M , Bhati P, et al. “Fabrication and characterization of Bioresorbable Radiopaque PLLA/PCL/Mg alloy composite tubes for cardiovascular stent application ” Journal of Polymeric Material and Polymeric Biomaterial 2023;
  5. Bhati, P, et al. “Physicochemical Properties of UV-Irradiated, Biaxially Oriented PLA Tubular Scaffolds” Polymers. 2023; 15(5):1097.
  6. Bhati, P, et al. “Physicochemical Characterization and Mechanical Performance Analysis of Biaxially Oriented PLA /PCL Tubular scaffolds for Intended Stent Application” SN Appl. Sci. 2, 2089 (2020).
  7. Srivastava A, Ahuja R, Bhati P, et al. “Fabrication and Characterization of PLLA/Mg Composite Tube as the potential Bioresorbable/biodegradable stent(BRS).” Materialia. March 2020:100661.
  8. Ahuja R, Bhati P, et al. “Biocompatibility Analysis of PLA based Candidate Materials for Cardiovascular Stents in a Rat Subcutaneous Implant Model” Acta Histochemica. 122 (2020) 151615.
  9. Bhati, P, et al. “Design Methodology of Balloon Expandable Polymeric Stents” Journal of Biomedical Engineering and Medical Devices” Volume 4, Issue 2 (2019)
  10. Bhati, P, and Bhatnagar, N. “Effect of Processing Parameters on Surface Hydrophilicity of Porous PLA Tubes Prepared by Gas-Assisted Microcellular Extrusion Foaming Technique.” Materials Letters 209 (2017): 602-605.
  11. Bhati, P, et al. “Evaluating the Effect of Manufacturing Method on the Radial Compressive Force of the Bioresorbable Tubes.” Materials Letters 235 (2019): 23-26.
  12. Jindal, M. Jindal and P. Bhati, “Artificial Intelligence in cancer survivorship care plans: what lies beyond diagnostics?,” 2022 4th International Conference on Artificial Intelligence and Speech Technology (AIST), Delhi, India, 2022, pp. 1-7,
  13. Sinha, S. Roy, A. Singh, V. Srivastava and P. Bhati, “Surface Wettability Prediction using ML/AI,” 2022 4th International Conference on Artificial Intelligence and Speech Technology (AIST), Delhi, India, 2022, pp. 1-6, doi: 10.1109/AIST55798.2022.10064943.
  14. Bhati, P, et al. Comparative Analysis and Development of Voice-based Chatbot System for Differentlyabled” 2022 J. Phys.: Conf. Ser. 2273 012003
  15. Bhati, P, et al. “Simulation Studies on Effect of Geometrical Variation on Bending Angle of a Soft Robotic Gripper”. ASMET 2021
  16. Bhati, P, et al. “Comparative Computational Analysis on the Bending Behavior of Soft Gripper Embodying Auxetic Metamaterial”. ASMET 2021
  17. Arora, K, J, Bhati, P. “Fabrication and Characterization of 3D Printed PLA Scaffolds” PPS 35,26-30 May Izmir Turkey, AIP Conference Proceedings 2205, 020065 (2020).
  18. Bhati, P, et al. “Design and Fabrication of 3D printed Bioresorbable Nerve Guide Conduit (NGC) for Peripheral Nerve Repair.” Adv. Sci. Eng. Med. 12, 1431–1436 (2020)
  19. Bhati, P, et al “Design of Pneumatic System for Automatic Door Opening and Closing” Adv. Sci. Eng. Med. 12, 1427–1430 (2020) (Awarded Best paper)