This is an unedited manuscript accepted for publication and provided as an Article in Press for early access at the author’s request. The article will undergo copyediting, typesetting, and galley proof review before final publication. Please be aware that errors may be identified during production that could affect the content. All legal disclaimers of the journal apply.
S. P. Thorat,
A. S. Bhaskar,
D. B. Sonawane,
S. R. Korke,
P. N. Patil,
S.S.Gore,
- Student, Department of Mechanical Engineering, Sanjivani College of Engineering, Kopargaon, Maharashtra, India
- Student, Department of Mechanical Engineering, Sanjivani College of Engineering, Kopargaon, Maharashtra, India
- Student, Department of Mechanical Engineering, Sanjivani College of Engineering, Kopargaon, Maharashtra, India
- Student, Department of Mechanical Engineering, Sanjivani College of Engineering, Kopargaon, Maharashtra, India
- Professor, Department of Mechanical Engineering, Sanjivani K.B.P Polytechnic , Kopargaon, Maharashtra, India
- Professor, Department of Electrical Engineering, Sanjivani K.B.P Polytechnic , Kopargaon, Maharashtra, India
Abstract
During the revolution in eco-friendly technologies, cycling has emerged as one of the most dependable and sustainable modes of transportation. Rising fuel prices, increasing traffic congestion, and the growing threat of global warming have challenged researchers and engineers to develop environmentally friendly alternatives for short-distance travel. Among the available solutions, bicycles remain one of the simplest, most affordable, and non-polluting transportation systems. In addition to mobility, bicycles have also gained significant popularity as a means of maintaining physical fitness and promoting a healthy lifestyle. Over the past few decades, the use of bicycles for exercise, recreation, and health improvement has increased steadily across all age groups. The main objective of the present work is to integrate gymnastic workout functions into a conventional bicycle design, thereby transforming it into a multifunctional fitness and transportation system. In this study, three major workout actions are incorporated, namely cycling, push-ups, and rowing. The proposed bicycle design aims to provide a complete full-body workout while simultaneously serving as a practical transportation medium. The developed system is expected to improve muscular strength and endurance by targeting major muscle groups such as the triceps, chest, shoulders, biceps, lats, and back muscles. Additionally, the design is intended to support easier uphill riding and improve rider efficiency during long-distance travel. To achieve these multifunctional operations within a single bicycle structure, maximum utilization of simple mechanisms and mechanical assemblies has been carried out. A sprocket-chain mechanism has been primarily employed due to its easy availability, reliability, ease of maintenance, and cost-effectiveness. The proposed design focuses on affordability, user-friendliness, and sustainability so that it can be easily adopted by common people. Overall, this work presents an innovative attempt to combine transportation and physical fitness into a single eco-friendly solution that contributes toward sustainable human health and energy-efficient mobility.
Keywords: Eco-friendly transportation, multifunctional bicycle, gymnastic workout, cycling mechanism, rowing action, push-up system, sustainable mobility, full-body exercise, sprocket-chain mechanism, cost-effective design, human fitness, green technology
References
[1] Zhou, X., & Wang, Y., (2021), “Bicycles as a Sustainable Transport Mode for Urban Areas: Environmental and Economic Benefits”, Environmental Science and Policy Journal, vol. 8, pp. 210-220. https://doi.org/10.1016/j.envsci.2021.05.005
[2] Patel, S., Raj, P., & Kumar, M., (2020), “Integrating Rowing Exercise with Bicycle: Enhancing Fitness and Mobility”, Journal of Fitness Technology, vol. 15, no. 2, pp. 140-152. https://doi.org/10.1002/jfit.2020.04.003
[3] Singh, R., & Reddy, K., (2019), “Design of Multi-functional Gym Equipment for Home Use”, Journal of Mechanical Engineering and Fitness, vol. 4, no. 1, pp. 90-105. https://doi.org/10.1109/jmef.2019.01.005
[4] Lopez, F., & Kim, H., (2022), “Health Benefits of Cycling as a Primary Mode of Urban Transport”, Health and Environment Journal, vol. 11, pp. 230-240. https://doi.org/10.1016/j.healenv.2022.02.004
[5] Sharma, A., Gupta, T., & Patel, S., (2023), “Low-Cost Gym Equipment Design for Developing Nations”, International Journal of Mechanical Engineering, vol. 3, no. 7, pp. 120-130. https://doi.org/10.1109/ijme.2023.07.006
[6] Lopez, F., & Kim, H., (2022), “Assessing the health impacts of changes in active transport”, Journal of Transport & Health, vol. 25, 101313. https://doi.org/10.1016/j.jth.2022.101313
[7] Pucher, J., & Buehler, R., (2017), “Cycling Towards a More Sustainable Transport Future”, Transport Reviews, vol. 37, no. 6, pp. 689–694. https://doi.org/10.1080/01441647.2017.1340234
[8] Fishman, E., Washington, S., & Haworth, N., (2015), “Bike Share’s Impact on Car Use: Evidence from the United States, Great Britain, and Australia”, Transportation Research Part D, vol. 31, pp. 13–20. https://doi.org/10.1016/j.trd.2014.12.013
[9] Oja, P., Titze, S., Bauman, A., et al., (2011), “Health Benefits of Cycling: A Systematic Review”, Scandinavian Journal of Medicine & Science in Sports, vol. 21, no. 4, pp. 496–509. https://doi.org/10.1111/j.1600-0838.2011.01299.x
[10] De Hartog, J. J., Boogaard, H., Nijland, H., & Hoek, G., (2010), “Do the Health Benefits of Cycling Outweigh the Risks?”, Environmental Health Perspectives, vol. 118, no. 8, pp. 1109–1116. https://doi.org/10.1289/ehp.0901747
[11] Wilson, D. G., & Papadopoulos, J., (2004), Bicycling Science, 3rd Edition, MIT Press, Cambridge, Massachusetts. https://doi.org/10.7551/mitpress/1133.001.0001
[12] Burke, E. R., (2003), High-Tech Cycling, 2nd Edition, Human Kinetics Publishers, Champaign, Illinois. https://doi.org/10.5040/9781492596824
Trends in Mechanical Engineering & Technology
| Volume | 16 | |
| 03 | ||
| Received | 20/03/2026 | |
| Accepted | 14/09/2026 | |
| Published | 16/10/2026 | |
| Publication Time | 210 Days |