Effects of Sub-Zero Temperatures on the Viscoelastic Properties of Magnetorheological Elastomer

Notice

This is an unedited manuscript accepted for publication and provided as an Article in Press for early access at the author’s request. The article will undergo copyediting, typesetting, and galley proof review before final publication. Please be aware that errors may be identified during production that could affect the content. All legal disclaimers of the journal apply.

Year : 2026 | Volume : 14 | 04 | Page :
    By

    Suziyani Zin,

  • Nur Azmah Nordin,

  • Saiful Amri Mazlan,

  • Mohd Aidy Faizal Johari,

  • Abdul Yasser Abd Fatah,

  • Rehnupreya Hentry Viension,

  • Nur Hairunnisa Kamarudin,

  1. Postgraduate Student, Department of Engineering Materials and Structures (eMast) iKohza, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi, Kuala Lumpur, , Malaysia
  2. Associate Professor, Department of Engineering Materials and Structures (eMast) iKohza / Automotive Development Centre, Institute for Sustainable Transport (IST), Universiti Teknologi, Kuala Lumpur, , Malaysia
  3. Professor, Department of Engineering Materials and Structures (eMast) iKohza / Automotive Development Centre, Institute for Sustainable Transport (IST), Universiti Teknologi, Kuala Lumpur, , Malaysia
  4. Postdoctoral Researcher, Department of Engineering Materials and Structures (eMast) iKohza, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi, Kuala Lumpur, , India
  5. Senior Lecturer, Department of Smart Engineering and Advanced Technology (SEAT), Faculty of Artificial Intelligence (FAI), Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra, 54100, Kuala Lumpur, , Malaysia
  6. Postgraduate Student, Department of Engineering Materials and Structures (eMast) iKohza, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi, Kuala Lumpur, , Malaysia
  7. Postgraduate Student, Department of Engineering Materials and Structures (eMast) iKohza, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi, Kuala Lumpur, , Malaysia

Abstract

Magnetorheological elastomers (MREs) are smart materials capable of tuneable stiffness and damping under applied magnetic fields. This renders the material as a promising candidate for adaptive vibration control and semi-active engineering applications. While their behaviour at elevated temperatures has been widely explored, limited attention has been given to their performance under sub-zero conditions, which are critical for cold-environment applications. As this has become an important concern, the study investigates the influence of sub-zero temperatures on the viscoelastic properties of silicone-based MREs, containing 70 wt.% of carbonyl iron particles. For the rheological study under dynamic shear loading, the MRE samples were fabricated under isotropic condition and subjected to controlled sub-zero conditioning at −15°C, −20°C and −25°C for five days each. Rheological characterization was conducted using oscillatory shear tests under both off-state and on-state magnetic field conditions. Key parameters including initial storage modulus (G′₀), storage modulus (G′) and magnetorheological (MR) effect, were evaluated. Hardness test was then carried out using Shore A hardness, while morphological analysis using scanning electron microscopy (SEM) was performed to correlate microstructural changes with the properties change. The results show a significant increase in stiffness with decreasing temperatures, as indicated by higher storage modulus and hardness values. This finding is attributed to restricted polymer chain mobility and enhanced particle–matrix interactions. However, the relative MR effect decreases at lower temperatures, suggesting reduced field-induced tunability capability due to limited particle interactions within the stiffer matrix. Microstructural observations reveal wrinkles, interfacial debonding and small holes caused by thermal mismatch, contributing to increased rigidity and reduced energy dissipation. Overall, the findings highlight a trade-off between stiffness enhancement and MR performance under sub-zero conditions, providing valuable insights for the design of MRE-based systems for low-temperature applications.

Keywords: Magnetorheological elastomer (MRE), Sub-zero temperatures, Magnetorheological effect, Storage modulus, Surface Wrinkles

773c2fdf fi
How to cite this article:
Suziyani Zin, Nur Azmah Nordin, Saiful Amri Mazlan, Mohd Aidy Faizal Johari, Abdul Yasser Abd Fatah, Rehnupreya Hentry Viension, Nur Hairunnisa Kamarudin. Effects of Sub-Zero Temperatures on the Viscoelastic Properties of Magnetorheological Elastomer. Journal of Polymer & Composites. 2026; 14(04):-.
How to cite this URL:
Suziyani Zin, Nur Azmah Nordin, Saiful Amri Mazlan, Mohd Aidy Faizal Johari, Abdul Yasser Abd Fatah, Rehnupreya Hentry Viension, Nur Hairunnisa Kamarudin. Effects of Sub-Zero Temperatures on the Viscoelastic Properties of Magnetorheological Elastomer. Journal of Polymer & Composites. 2026; 14(04):-. Available from: https://journals.stmjournals.com/jopc/article=2026/view=249427


References

  1. Dargahi A, Sedaghati R, Rakheja S. On the properties of magnetorheological elastomers in shear mode: Design, fabrication and characterization. Compos B Eng. 2019; 269–83. 10.1016/j.compositesb.2018.09.080.
  2. Johari MAF, Mazlan SA, Nordin NA, Ubaidillah U, Aziz SAA, Nazmi N, Johari N, Choi SB. The effect of microparticles on the storage modulus and durability behavior of magnetorheological elastomer. Micromachines; 2021; 12:948. 10.3390/mi12080948.
  3. Berasategi J, Salazar D, Gomez A, Gutierrez J, Sebastián MS, Bou-Ali M, Barandiaran JM. Anisotropic behaviour analysis of silicone/carbonyl iron particles magnetorheological elastomers. Rheol Acta; 2020; 59:469–76. 10.1007/s00397-020-01218-4.
  4. Johari MAF, Mazlan SA, Ubaidillah U, Nordin NA, Ahmad Khairi MH, Abdul Aziz SA, Sedlacik N, Leong SAN. Natural Weathering Effects on the Mechanical, Rheological, and Morphological Properties of Magnetorheological Elastomer (MRE) in Tropical Climate. Int J Mol Sci.; 2022; 23. 10.3390/ijms23179929.
  5. Aziz SAA, Mazlan SA, Ubaidillah U, Mohamad N, Choi S-B, Che Aziz MA, Johari MAF, Homma K. Thermal Aging Rheological Behavior of Magnetorheological Elastomers Based on Silicone Rubber. Int J Mol Sci; 2020; 21:9007. 10.3390/ijms21239007.
  6. Wibowo W, Lenggana BW, Ubaidillah U, Ariawan D, Imaduddin F, Mazlan SA, Choi SB. Declining performance of silicone-based magnetorheological elastomers after accelerated weathering. Materials; 2021; 14. 10.3390/ma14216389.
  7. Zhang W, Gong XL, Jiang WQ, Fan YC. Investigation of the durability of anisotropic magnetorheological elastomers based on mixed rubber. Smart Mater Struct. 2010; 19:085008. 10.1088/0964-1726/19/8/085008.
  8. Hemmatian M, Sedaghati R, Rakheja S. Characterization and modeling of temperature effect on the shear mode properties of magnetorheological elastomers. Smart Mater Struct.; 2020; 29:115001. 10.1088/1361-665X/abb359.
  9. Kiarie WM, Gandha K, Jiles DC. Temperature-Dependent Magnetic Properties of Magnetorheological Elastomers. IEEE Trans Magn. Institute of Electrical and Electronics Engineers Inc.; 2022; 58. 10.1109/TMAG.2021.3082302.
  10. Sarma AD, Gowd EB, Das A, Heinrich G. The effect of crosslink density on the cold crystallization behavior of polybutadiene elastomers. Express Polym Lett.; 2023; 17:690–8. 10.3144/expresspolymlett.2023.51.
  11. Wang S, Hou M, Ma K, Li Z, Geng H, Zhang W, Li N. Research on the Influence of Extremely Cold Environment on the Performance of Silicone Rubber and Fluorinated Silicone Rubber. Polymers; 2022; 14. 10.3390/polym14091898
  12. Wan Y, Xiong Y, Zhang S. Temperature effect on viscoelastic properties of anisotropic magnetorheological elastomers under compression. Smart Mater Struct; 2019; 28:015005. 10.1088/1361-665X/aaeaf8.
  13. Tian Y, Hou LX, Zhang XN, Du M, Zheng Q, Wu ZL. Engineering Tough Supramolecular Hydrogels with Structured Micropillars for Tunable Wetting and Adhesion Properties. Nano. Micro Small; 2024; 20. 10.1002/smll.202308570.
  14. Jaafar MF, Mustapha F, Mustapha M. Review of current research progress related to magnetorheological elastomer material. J. Mater. Research and Tech.; 2021; 5010–45. 10.1016/j.jmrt.2021.10.058.
  15. Bastola AK, Hossain M. A review on magneto-mechanical characterizations of magnetorheological elastomers. Compos. B; 2020. 10.1016/j.compositesb.2020.108348.
  16. Wang X, Zhang Y, Ren S, Xu Z, Li K, Hao X, He Q. Effect of zinc oxide/layered double hydroxide on the mechanics of silicone rubber at low temperature. Eur Polym J.; 2023; 200. 10.1016/j.eurpolymj.2023.112478
  17. Wan Y, Xiong Y, Zhang S. Temperature dependent dynamic mechanical properties of Magnetorheological elastomers: Experiment and modeling. Compos Struct. 2018; 202:768–73. 10.1016/j.compstruct.2018.04.010.
  18. Repplinger C, Sellen S, Kedziora S, Zürbes A, Maas S. Material modeling for numerical simulation of elastomer O-rings with experimental verification at low temperatures. Int J Hydrogen Energy; 2024; 80:1046–61. 10.1016/j.ijhydene.2024.06.427.
  19. Agirre-Olabide I, Berasategui J, Elejabarrieta MJ, Bou-Ali MM. Characterization of the linear viscoelastic region of magnetorheological elastomers. J Intell Mater Syst Struct.; 2014; 25:2074–81. 10.1177/1045389X13517310
  20. Soria-Hernández C, Palacios-Pineda L, Elías-Zúñiga A, Perales-Martínez I, Martínez-Romero O. Investigation of the Effect of Carbonyl Iron Micro-Particles on the Mechanical and Rheological Properties of Isotropic and Anisotropic MREs: Constitutive Magneto-Mechanical Material Model. Polymers; 2019; 11:1705. 10.3390/polym11101705.
  21. Dhiman NK, Salodkar SM, Gagandeep, Susheel C. Advances in Modeling and Control of Magnetorheological Elastomers for Engineering Applications. Archives of Comp. Methods in Eng.; 2024; 31:1823–65. 10.1007/s11831-023-10031-0.
  22. Arslan Hafeez M, Usman M, Umer MA, Hanif A. Recent Progress in Isotropic Magnetorheological Elastomers and Their Properties: A Review. Polymers; 2020; 12:3023. 10.3390/polym12123023.
  23. Chen D, Li J, Yuan Y, Gao C, Cui Y, Li S, Liu X, Wang H, Peng C, Wu Z. A Review of the Polymer for Cryogenic Application: Methods, Mechanisms and Perspectives. Polymers; 2021; 13:320. 10.3390/polym13030320.
Ahead of Print Subscription Original Research
Volume 14
04
Received 26/05/2026
Accepted 07/07/2026
Published 10/07/2026
Publication Time 45 Days
27

Login


My IP

PlumX Metrics