pH-Responsive Smart Polymer Nanocomposites for Anti-Corrosive Coatings

Notice

This is an unedited manuscript accepted for publication and provided as an Article in Press for early access at the author’s request. The article will undergo copyediting, typesetting, and galley proof review before final publication. Please be aware that errors may be identified during production that could affect the content. All legal disclaimers of the journal apply.

Year : 2026 | Volume : 14 | 03 | Page :
    By

    S Ajith Arul Daniel,

  • M. Bala Theja,

  • Hari kumar Andem,

  • Ankush B. Khansole,

  • S. Mohamed Rabeek,

  • Santosh Kumar Nathsharma,

  1. Assistant Professor, Department of mechanical engineering, Vels institute of science technology and advanced studies, Chennai, Tamil Nadu, India
  2. Associate Professor, Mechanical Engineering, Santhiram Engineering College (Autonomous), Nandyal, Andhra Pradesh, India
  3. Assistant Professor, Department of Mechanical Engineering, Kakatiya Institute of Technology and Science, Hasanparthy, Hanamkonda, Telangana, India
  4. Assistant Professor, Department of Mechanical Engineering, CSMSS, Chhatrapati Shahu College of Engineering, Kachan Wadi, Chhatrapati Sambhaji nagar, Maharashtra, India
  5. Assistant Professor, PG and Research Department of Chemistry, Jamal Mohamed College (Autonomous), Affiliated to Bharathidasan University, Trichy, Tamil Nadu, India
  6. Lecturer, Department of Chemistry, Stewart Science College, Cuttack, Odisha, India

Abstract

Metallic corrosion under adverse marine and industrial conditions imposes gigantic financial burdens and risks worldwide. Conventional waterproofing waterborne epoxy has passive barrier protection, but is also inherently microporous, lacking intrinsic repair ability against mechanical damage and thus rapidly decays. This is a critical gap that this work tries to bridge by designing a new pH-responsive hybrid polymer nanocomposite by using polyethyleneimine-tannic acid-cerium functionalized boron nitrate nanosheets with chitosan-capped mesoporous silica particles loaded with corrosion inhibitors in a water-borne epoxy matrix. The synergistic structure will enhance passive barrier properties through tortuous pathways created by two-dimensional nanofillers and active self-healing by means of pH-dependent on-demand release of corrosion-inhibitors in reaction to local acidity created upon the onset of corrosion. The electrochemical impedance spectrophotometry had revealed that the hybrid nanocomposite coating had a very high impedance modulus of the low frequency (9.8109 ohms/cm 2) of 75 days at low concentration (3.5 wt%) of NaCl solution, which is more than two orders of magnitude greater than the pure waterborne epoxy. In addition, the artificially scribed samples exhibited high healing properties under prolonged salt spray environments and corrosion proceeded very slowly even after 100 days in salt spray. Simulations with the help of molecular dynamics have confirmed the presence of much lower diffusion coefficients of water, oxygen and chloride ions and lower fractional free volume. These results compose scalable, environmentally benignant next-generation intelligent anticorrosive coating that can combine superior long-term barrier performance with autonomous active healing with enormous potential to increase the service life in problematic settings.

Keywords: pH-responsive smart coatings, Self-healing anticorrosive coatings, Active corrosion protection, Waterborne epoxy coatings, Hybrid polymer nanocomposites

How to cite this article:
S Ajith Arul Daniel, M. Bala Theja, Hari kumar Andem, Ankush B. Khansole, S. Mohamed Rabeek, Santosh Kumar Nathsharma. pH-Responsive Smart Polymer Nanocomposites for Anti-Corrosive Coatings. Journal of Polymer & Composites. 2026; 14(03):-.
How to cite this URL:
S Ajith Arul Daniel, M. Bala Theja, Hari kumar Andem, Ankush B. Khansole, S. Mohamed Rabeek, Santosh Kumar Nathsharma. pH-Responsive Smart Polymer Nanocomposites for Anti-Corrosive Coatings. Journal of Polymer & Composites. 2026; 14(03):-. Available from: https://journals.stmjournals.com/jopc/article=2026/view=244965


References

[1]      L. Yi, S. Song, and Y. Liu, “Fabrication of functionalized boron nitride modified self-healing composite coating for corrosion and wear protection,” Compos. Part A Appl. Sci. Manuf., vol. 191, p. 108747, Apr. 2025, doi: 10.1016/J.COMPOSITESA.2025.108747.

[2]      L. Wang et al., “An active self–healing and UV–resistant anticorrosion coating based on loading–enhanced nanocontainers tailored for Q235 carbon steel protection,” Prog. Org. Coat., vol. 201, p. 109128, Apr. 2025, doi: 10.1016/J.PORGCOAT.2025.109128.

[3]      P. Xu et al., “Polyethyleneimine-assisted supramolecular self-assembly of cerium-phenol-amine system on boron nitride surfaces for anticorrosive coatings with active pH responsive behavior and enhanced barrier performance,” Advanced Composites and Hybrid Materials 2026, Apr. 2026, doi: 10.1007/S42114-026-01789-5.

[4]      H. Jiang et al., “Rapid exfoliation and surface hydroxylation of high-quality boron nitride nanosheets enabling waterborne polyurethane with high thermal conductivity and flame retardancy,” Advanced Composites and Hybrid Materials 2024 7:1, vol. 7, no. 1, pp. 8-, Jan. 2024, doi: 10.1007/S42114-023-00818-X.

[5]      D. He et al., “Chitosan microspheres encapsulating phenolphthalein for epoxy coatings: pH-responsive release and smart corrosion warning,” Prog. Org. Coat., vol. 214, May 2026, doi: 10.1016/J.PORGCOAT.2026.110003.

[6]      N. Saha, G. Brunetti, M. N. Armenise, and C. Ciminelli, “A Compact, Highly Sensitive pH Sensor Based on Polymer Waveguide Bragg Grating,” IEEE Photonics J., vol. 15, no. 2, Apr. 2023, doi: 10.1109/JPHOT.2023.3242820.

[7]      A. Lopez Aldaba, González-Vila, M. Debliquy, M. Lopez-Amo, C. Caucheteur, and D. Lahem, “Polyaniline-coated tilted fiber Bragg gratings for pH sensing,” Sens. Actuators B Chem., vol. 254, pp. 1087–1093, Jan. 2018, doi: 10.1016/J.SNB.2017.07.167.

[8]      Y. Sang et al., “Synthetic polyaniline-boron nitride-aqueous epoxy resin composite coating for improving the corrosion resistance of hot-dip galvanized steel plates,” Appl. Surf. Sci., vol. 592, p. 153229, Aug. 2022, doi: 10.1016/J.APSUSC.2022.153229.

[9]      J. Cao, G. Xiao, M. Wang, X. Ma, J. Gou, and H. Yan, “Construction of waterborne epoxy smart anti-corrosion coating based on mPDA/Ti3C2Tx nanocomposites – Synergistic barrier effect and self-repair mechanisms,” Prog. Org. Coat., vol. 207, p. 109427, Oct. 2025, doi: 10.1016/J.PORGCOAT.2025.109427.

[10]    S. He et al., “Enhancement of corrosion resistance and wear resistance of waterborne epoxy resin by polydopamine-modified siloxene,” Ceram. Int., vol. 51, no. 23, pp. 40244–40260, Sep. 2025, doi: 10.1016/J.CERAMINT.2025.06.257.

[11]     X. Wang and Z. Lin, “Robust, hydrophobic anti-corrosion coating prepared by PDMS modified epoxy composite with graphite nanoplatelets/nano-silica hybrid nanofillers,” Surf. Coat. Technol., vol. 421, p. 127440, Sep. 2021, doi: 10.1016/J.SURFCOAT.2021.127440.

[12]    R. Zou et al., “High barrier and durable self-healing composite coating: Boron nitride combined with cyclodextrin for enhancing the corrosion protection properties of waterborne epoxy coating,” Colloids Surf. A Physicochem. Eng. Asp., vol. 653, p. 129896, Nov. 2022, doi: 10.1016/J.COLSURFA.2022.129896.

[13]    L. Pei et al., “A multifunctional and long-term waterborne anti-corrosion coating with excellent ‘hexagonal warrior’ properties,” Chemical Engineering Journal, vol. 457, p. 141158, Feb. 2023, doi: 10.1016/J.CEJ.2022.141158.

[14]    T. Chen, Y. Li, W. Zhang, F. Liu, and E. H. Han, “Sustainable photothermal-responsive anti-corrosion nanocomposite coating with distinguished self-healing performance and ultrahigh mechanical properties,” Prog. Org. Coat., vol. 200, p. 109070, Mar. 2025, doi: 10.1016/J.PORGCOAT.2025.109070.

[15]    J. Du, H. Wang, Z. Wang, X. Li, and H. Song, “A smart self-healing coating utilizing pH-responsive dual nanocontainers for corrosion protection of aluminum alloy,” Surf. Coat. Technol., vol. 494, p. 131305, Oct. 2024, doi: 10.1016/J.SURFCOAT.2024.131305.

[16]    Y. Deng et al., “pH-drive responsive and controlled release system of smart nanocontainers for corrosion protection of epoxy resin,” Prog. Org. Coat., vol. 200, p. 109068, Mar. 2025, doi: 10.1016/J.PORGCOAT.2025.109068.

[17]    D. C. Okolo, J. Anumudu, N. C. Omekawum, and A. I. Ndukwe, “Fundamental and sustainability of nanoengineered green corrosion inhibitors,” Discover Electrochemistry 2026 3:1, vol. 3, no. 1, pp. 34-, Apr. 2026, doi: 10.1007/S44373-026-00123-4.

[18]    J. Jomy, D. Prabhu, and P. R. Prabhu, “Inhibitors Incorporated Into Water-Based Epoxy Coatings on Metals for Corrosion Protection: A Review,” Journal of Bio- and Tribo-Corrosion 2022 8:2, vol. 8, no. 2, pp. 44-, Feb. 2022, doi: 10.1007/S40735-022-00643-7.

[19]    F. Guo, H. Yin, H. Liu, J. Ma, H. Luo, and H. Li, “Hollow ZIF-8 microcapsules loaded with tannic acid for smart self-healing anticorrosion coatings,” Surface Science and Technology 2026 4:1, vol. 4, no. 1, pp. 16-, Mar. 2026, doi: 10.1007/S44251-025-00118-0.

[20]    S. Wan, H. Chen, B. Liao, and X. Guo, “Enhanced anti-corrosive capability of waterborne epoxy coating by ATT exfoliated boron nitride nanosheets composite fillers,” Prog. Org. Coat., vol. 186, p. 108089, Jan. 2024, doi: 10.1016/J.PORGCOAT.2023.108089.

[21]    Q. Hong, Y. Xia, C. Wang, Y. Li, Q. Shen, and H. Yang, “Heterogeneous assembly of zirconium-doped CeO2 and boron nitride nanosheets as functional nanofillers for excellent corrosion protection and enhanced UV resistance of epoxy nanocomposite coatings,” Appl. Surf. Sci., vol. 732, p. 166485, Jun. 2026, doi: 10.1016/J.APSUSC.2026.166485.

[22]    Z. Shi et al., “Active anti-corrosion and fluorescence self-detection coatings with mussel-inspired hexagonal boron nitride-based multifunctional nanocontainers,” Prog. Org. Coat., vol. 210, p. 109733, Jan. 2026, doi: 10.1016/J.PORGCOAT.2025.109733.

[23]    J. Jomy, D. Prabhu, and P. R. Prabhu, “Inhibitors Incorporated Into Water-Based Epoxy Coatings on Metals for Corrosion Protection: A Review,” Journal of Bio- and Tribo-Corrosion 2022 8:2, vol. 8, no. 2, pp. 44-, Feb. 2022, doi: 10.1007/S40735-022-00643-7.

[24]    X. Liu, C. Gu, Z. Wen, and B. Hou, “Improvement of active corrosion protection of carbon steel by water-based epoxy coating with smart CeO2 nanocontainers,” Prog. Org. Coat., vol. 115, pp. 195–204, Feb. 2018, doi: 10.1016/J.PORGCOAT.2017.10.015.

[25]    R. Yu and X. Yuan, “Rising of boron nitride: A review on boron nitride nanosheets enhanced anti-corrosion coatings,” Prog. Org. Coat., vol. 186, p. 107990, Jan. 2024, doi: 10.1016/J.PORGCOAT.2023.107990.

[26]    I. Antohe, L. I. Jinga, V. A. Antohe, and G. Socol, “Sensitive ph monitoring using a polyaniline-functionalized fiber optic—surface plasmon resonance detector,” Sensors, vol. 21, no. 12, p. 4218, Jun. 2021, doi: 10.3390/S21124218/S1.

[27]    Y. Lu, Y. Li, and J. Yang, “Multiple synergistic anti-corrosion nanocontainers: endowing coatings with long-term anticorrosion performance and UV resistance,” Mater. Today Chem., vol. 50, p. 103119, Dec. 2025, doi: 10.1016/J.MTCHEM.2025.103119.

[28]    A. Dashan, F. Norouzi, M. Ramezanzadeh, and B. Ramezanzadeh, “Hybrid 3D/2D NH2-UIO-66/h-BN nanostructures for smart epoxy coatings with enhanced anti-corrosion and mechanical performance,” Journal of Materials Research and Technology, vol. 37, pp. 2084–2104, Jul. 2025, doi: 10.1016/J.JMRT.2025.06.101.

[29]    Y. Li et al., “Self-healing and early corrosion warning bi-functional waterborne epoxy coatings via intercomponent synergy between pH-sensitive Phen/BTA- loaded CaCO3 nanocontainer@ZIF-8 and graphene oxide for long-lasting protection of Q235 carbon steel,” Colloids Surf. A Physicochem. Eng. Asp., vol. 728, p. 138568, Jan. 2026, doi: 10.1016/J.COLSURFA.2025.138568.

[30]    L. Cheng, D. Jiao, L. Cao, K. Deng, P. Hou, and C. Liu, “Triple-action long-term anti-corrosion coating enabled by functional zinc molybdate-based nanosheets towards high-efficiency barrier, self-detection and self-healing properties,” Chemical Engineering Journal, vol. 507, p. 160426, Mar. 2025, doi: 10.1016/J.CEJ.2025.160426.

[31]    S. M. Z. Mehdi et al., “Emerging boron nitride nanosheets: A review on synthesis, corrosion resistance coatings, and their impacts on the environment and health,” Reviews on Advanced Materials Science, vol. 63, no. 1, Jan. 2024, doi: 10.1515/RAMS-2024-0075.

[32]    R. Xu and H. Shi, “An Active Protective Waterborne Epoxy Coating with Mesoporous Silica-1,10-Phenanthroline Microcontainers on Carbon Steel,” Coatings, vol. 16, no. 4, p. 477, Apr. 2026, doi: 10.3390/COATINGS16040477/S1.

[33]    C. Li, X. Guo, and G. S. Frankel, “Corrosion inhibition of AA2024-T3 by a coating containing dual-pH sensitive, corrosion inhibitor loaded microspheres,” Corros. Sci., vol. 192, p. 109835, Nov. 2021, doi: 10.1016/J.CORSCI.2021.109835.

[34]    S. Stoukatch, M. Debliquy, F. Dupont, and J. M. Redouté, “Low-Cost Optical pH Sensor with a Polyaniline (PANI)-Sensitive Layer Based on Commercial Off-the-Shelf (COTS) Components,” Micromachines 2023, Vol. 14, Page 2197, vol. 14, no. 12, p. 2197, Nov. 2023, doi: 10.3390/MI14122197.

[35]    F. Zhong, Y. He, P. Wang, C. Chen, and Y. Wu, “Novel pH-responsive self-healing anti-corrosion coating with high barrier and corrosion inhibitor loading based on reduced graphene oxide loaded zeolite imidazole framework,” Colloids Surf. A Physicochem. Eng. Asp., vol. 642, p. 128641, Jun. 2022, doi: 10.1016/J.COLSURFA.2022.128641.

Ahead of Print Subscription Original Research
Volume 14
03
Received 16/05/2026
Accepted 23/05/2026
Published 25/05/2026
Publication Time 9 Days
25

Login


My IP

PlumX Metrics