Review On BIM-Based (Revit+Robot Software) Comparative Wind Load Analysis of High-Rise RCC Buildings in Zone-III, IV and V

Notice

This is an unedited manuscript accepted for publication and provided as an Article in Press for early access at the author’s request. The article will undergo copyediting, typesetting, and galley proof review before final publication. Please be aware that errors may be identified during production that could affect the content. All legal disclaimers of the journal apply.

Year : 2026 | Volume : 13 | 02 | Page :
    By

    Pratibha Namdev Khillare,

  • Prof. Satish S. Manal,

  1. M.Tech Student, Department of Civil Engineering, Chh.Shahu College of Engineering. Chh. Sambhajinagar, Maharashtra, india
  2. Assistant Professor, Department Of Civil Engineering,Chh. Shahu College of Engineering. Chh. Sambhajinagar, Maharashtra, India

Abstract

Wind load is one of the most critical factors influencing the design and serviceability of high-rise reinforced concrete (RCC) buildings. As building height increases, wind-induced effects such as storey drift, lateral displacement, and structural stiffness become dominant design considerations. Numerous studies have been conducted using conventional and advanced techniques such as Finite Element Method (FEM), Computational Fluid Dynamics (CFD), and Building Information Modelling (BIM). However, limited research focuses on comparative analysis across different wind zones using an integrated BIM–FEM approach.This paper presents a comprehensive review of existing research on wind behaviour of high-rise buildings. The influence of building geometry, structural systems, material properties, and analysis tools on wind response is critically examined. The review also identifies key research gaps and highlights the need for a consistent modelling approach and multi-zone comparative analysis. The findings emphasize that aerodynamic shapes, increased structural stiffness, and advanced analysis tools significantly improve wind performance. Furthermore, this study extends the discussion by outlining the importance of standardized design methodologies that can be uniformly applied across varying geographical wind conditions. It also underscores the role of hybrid modelling techniques that integrate BIM with FEM to enhance accuracy, efficiency, and data interoperability during analysis and design stages. The paper highlights the necessity for incorporating real-time environmental data and dynamic loading conditions to achieve more reliable predictions of structural behaviour. Additionally, future research directions are proposed, focusing on performance-based design approaches, optimization of structural configurations, and the development of resilient and sustainable high-rise structures capable of withstanding extreme wind events.

Keywords: Wind Load, High-Rise Buildings, BIM, FEM, Storey Drift, Displacement, Wind Zones

How to cite this article:
Pratibha Namdev Khillare, Prof. Satish S. Manal. Review On BIM-Based (Revit+Robot Software) Comparative Wind Load Analysis of High-Rise RCC Buildings in Zone-III, IV and V. Journal of Structural Engineering and Management. 2026; 13(02):-.
How to cite this URL:
Pratibha Namdev Khillare, Prof. Satish S. Manal. Review On BIM-Based (Revit+Robot Software) Comparative Wind Load Analysis of High-Rise RCC Buildings in Zone-III, IV and V. Journal of Structural Engineering and Management. 2026; 13(02):-. Available from: https://journals.stmjournals.com/josem/article=2026/view=243764


References

[1] T. Mazarakou and A. Papalou, “Aerodynamic behavior of tall buildings under wind loads,” Journal of Wind Engineering and Industrial Aerodynamics, Elsevier, 2025.

[2] R. Singh and P. Verma, “Wind load reduction techniques in high-rise structures,” International Journal of Civil Engineering, Springer, 2025.

[3] Sudarshan Suryanarayan, “BIM-Based Comparative Structural Analysis of High-Rise Buildings,” International Research Journal of Engineering and Technology (IRJET), 2025.

[4] S. V. B. Reddy, “Comparison of STAAD.Pro and ETABS for wind analysis,” International Journal of Engineering Research & Technology (IJERT), 2024.

[5] Khushbu Jani and Paresh V. Patel, “Analysis of diagrid structures under wind loads,” Procedia Engineering, Elsevier, 2024.

[6] K. Chaithanya and P. Sarika, “Wind analysis using STAAD.Pro and SAP2000,” International Journal of Scientific Research in Engineering and Technology (IJSRET), 2024.

[7] S. Ranch and N. Gupta, “Wind analysis of irregular buildings,” International Journal of Advanced Structural Engineering, Springer, 2024.

[8] M. Zia and H. Khan, “Wind behaviour of steel buildings,” Journal of Constructional Steel Research, Elsevier, 2024.

[9] K. Patel and A. Mishra, “Effect of plan shape on wind performance,” International Journal of Civil Engineering and Technology (IJCIET), 2024.

[10] S. Singh and A. Kumar, “CFD and FEM based wind analysis,” Journal of Wind Engineering and Industrial Aerodynamics, Elsevier, 2023.

[11] P. Rao, M. Ali, T. Thomas and S. Roy, “Effect of façade geometry on wind response,” Engineering Structures, Elsevier, 2023.

[12] S. Khan and T. Deshmukh, “Wind analysis of regular and irregular buildings,” International Journal of Engineering Research & Technology (IJERT), 2023.

[13] R. Patel, “Dynamic wind response of RCC buildings,” Asian Journal of Civil Engineering, Springer, 2023.

[14] P. Sharma, “Modal analysis under wind loading,” International Journal of Structural Stability and Dynamics, World Scientific, 2023.

[15] D. Mehta, “Comparison of RCC and steel buildings,” Journal of Structural Engineering, ASCE, 2023.

[16] J. Rao, “CFD analysis of wind pressure,” Journal of Wind Engineering and Industrial Aerodynamics, Elsevier, 2023.

[17] F. Ali, “Evaluation of IS 875 wind provisions,” International Journal of Civil Engineering, Springer, 2023.

[18] A. Thomas, “Effect of building orientation on wind response,” Engineering Structures, Elsevier, 2023.

[19] S. Roy, “Bracing systems in high-rise buildings,” International Journal of Advanced Structural Engineering, Springer, 2023.

[20] B. Nayak, “Wind vs seismic load comparison,” International Journal of Civil Engineering, Springer, 2023.

[21] Kiran Kumar, “Effect of façade geometry on wind performance,” Journal of Wind Engineering and Industrial Aerodynamics, Elsevier, 2023.

[22] Sanjay Verma and Kiran Lokhande, “Wind analysis of irregular buildings,” International Journal of Engineering Research & Technology (IJERT), 2023.

[23] Hameed Siddiqui and Mohsin Pathan, “Wind behaviour of triangular buildings,” International Journal of Civil Engineering and Technology (IJCIET), 2023.

[24] Deepak Rajan and Lawrence Francis, “Wind behaviour of composite structures,” Engineering Structures, Elsevier, 2023.

[25] Vinay Bhashyam and Suresh Kulkarni, “Wind analysis of polygonal buildings,” International Journal of Structural Engineering, Inderscience, 2023.

[26] Ramesh Krishnan and Parvez Salim, “Effect of bracing on wind response,” International Journal of Advanced Structural Engineering, Springer, 2023.

[27] Sandeep Patidar and Jitendra Pande, “Effect of corner modification on wind load,” Journal of Wind Engineering and Industrial Aerodynamics, Elsevier, 2023.

[28] Prakash Adhikari and Thomas Lewis, “Building orientation and wind response,” Engineering Structures, Elsevier, 2023.

[29] Khalid Mohammed and Rashid Ahmed, “Core-wall vs tube structures under wind,” Journal of Structural Engineering, ASCE, 2023.

[30] Anthony D’Souza and Michael Vincent, “Wind interference effects in tall buildings,” Journal of Wind Engineering and Industrial Aerodynamics, Elsevier, 2023.

Ahead of Print Subscription Review Article
Volume 13
02
Received 25/04/2026
Accepted 30/04/2026
Published 06/05/2026
Publication Time 11 Days
1

Login


My IP

PlumX Metrics