Thermal and Mechanical Properties of Zn-Fap Composites

Notice

This is an unedited manuscript accepted for publication and provided as an Article in Press for early access at the author’s request. The article will undergo copyediting, typesetting, and galley proof review before final publication. Please be aware that errors may be identified during production that could affect the content. All legal disclaimers of the journal apply.

Year : 2026 | Volume : 14 | 02 | Page :
    By

    Hazari Naresh,

  • Nagasri Sunkara Saihari,

  • M. S. Srinivasa Rao,

  • Aedula Manoj Kumar,

  • Kyadagiri Shashank,

  • T.S. Krishna Kumar,

  1. Assistant Professor, Department of Mechanical Engineering, VNR Vignana Jyothi Institute of Engineering and Technology, Hyderabad, Telangana, India
  2. Assistant Professor, Department of Mechanical Engineering, VNR Vignana Jyothi Institute of Engineering and Technology, Hyderabad, Telangana, India
  3. Senior Assistant Professor, Department of Mechanical Engineering, VNR Vignana Jyothi Institute of Engineering and Technology, Hyderabad, Telangana, India
  4. Student, Department of Mechanical Engineering, VNR Vignana Jyothi Institute of Engineering and Technology, Hyderabad, Telangana, India
  5. Student, Department of Mechanical Engineering, VNR Vignana Jyothi Institute of Engineering and Technology, Hyderabad, Telangana, India
  6. Assistant Professor, Department of Automobile Engineering, VNR Vignana Jyothi Institute of Engineering and Technology, Hyderabad, Telangana, India

Abstract

The aerospace and automotive industries have experienced a substantial surge in interest in innovative composite systems driven by the ongoing demand for lightweight, high-performance materials. In this study, the mechanical properties of zinc (Zn) matrix composites reinforced with fluorapatite particles (Fap) are examined as a function of thermal treatment. Within the context of this investigation, we endeavoured to create composite materials containing Zinc-Fluorapatite powder. Stir casting was used to produce both Pure zinc composites and Fap composites. A variety of compositions were taken, and all samples underwent mechanical characterization, namely, a tensile test. The samples were heat-treated in the furnace after casting to assess their behaviour. The findings suggest that mechanical properties are highly dependent on the heat treatment used. The ultimate tensile strength of the samples treated at a specific temperature for a specific duration was found to be significantly increased. This was because particle dispersion improved, and interfacial bonding between the Zn matrix and the Fap reinforcement increased. The yield strength of the 1% Fap composites was found to be 40 MPa, while their ultimate tensile strength was found to be 60 MPa. The yield strength of the pure zinc sample is 55MPa, while the ultimate tensile strength of the sample is 70MPa.

Keywords: Zinc- Fluorapatite composites, Thermal Analysis, Mechanical properties, Thermal treatment.

How to cite this article:
Hazari Naresh, Nagasri Sunkara Saihari, M. S. Srinivasa Rao, Aedula Manoj Kumar, Kyadagiri Shashank, T.S. Krishna Kumar. Thermal and Mechanical Properties of Zn-Fap Composites. Journal of Polymer & Composites. 2026; 14(02):-.
How to cite this URL:
Hazari Naresh, Nagasri Sunkara Saihari, M. S. Srinivasa Rao, Aedula Manoj Kumar, Kyadagiri Shashank, T.S. Krishna Kumar. Thermal and Mechanical Properties of Zn-Fap Composites. Journal of Polymer & Composites. 2026; 14(02):-. Available from: https://journals.stmjournals.com/jopc/article=2026/view=240289


References

  1. Ma Y, Yang S, Meng X, et al. Heat treatment effects on microstructure and mechanical properties of CVI SiCf/PyC/SiC composites with Cansas-Ⅲ SiC fibers. J Eur Ceram Soc. 2023;43(14):5940–9.
  2. Lim SS, Jung SJ, Kim BK, et al. Combined hot extrusion and spark plasma sintering method for producing highly textured thermoelectric Bi2Te3 alloys. J Eur Ceram Soc. 20;40(8):3042–8.
  3. Ma G, Zhu S, Wang D, et al. Effect of heat treatment on the microstructure, mechanical properties and fracture behaviors of ultra-high-strength SiC/Al–Zn–Mg–Cu composites. Int J Miner Metall Mater. 2024;31(10):2233–43.
  4. Sharma A, Srinivasan K V S, Dixit M, et al. Ballistic performance of functionally graded boron carbide reinforced Al – Zn – Mg – Cu alloy. J Mater Res Technol. 2022;18:4042–59.
  5. Wang Y, Zuo X, Ran S, et al. Effects of semi-solid extrusion and heat treatment on the microstructure, mechanics, and wear resistance of SiC/High aluminum zinc-base alloy composites. Mod Phys Lett B. 2020;34(25):1–14.
  6. Li J, He Y, Zhao X, et al. Evolution of Microstructure and Mechanical Properties of Al-Zn-Mg-Cu Alloy by Extrusion and Heat Treatment. Coatings. 2022;12(6).
  7. Huang W, Shu C, Hua L, et al. Modified bacterial outer membrane vesicles induce autoantibodies for tumor therapy. Acta Biomater. 2020;108(xxxx):300–12.
  8. Murchio S, Dallago M, Zanini F, et al. Additively manufactured Ti–6Al–4V thin struts via laser powder bed fusion: Effect of building orientation on geometrical accuracy and mechanical properties. J Mech Behav Biomed Mater. 2021;119(November 2020):104495.
  9. Li C, Wang X, Li B, et al. Effect of cold rolling and aging treatment on the microstructure and properties of Cu–3Ti–2Mg alloy. J Alloys Compd. 2020;818
  10. Guo F, Zhou Y, Jiang Q, Chen P, Ren B. Influence of Heat Treatment Temperature on Microstructure and Mechanical Properties of TiB2@Ti/AlCoCrFeNi2.1 Eutectic High-Entropy Alloy Matrix Composites. Metals (Basel). 2025;15(7):1–14.
  11. Zhou J, Ye F, Cheng L, Li M, Cui X, Fu Z, et al. Effects of heat treatment on mechanical properties of 3D Si3N4f/BN/Si3N4 composites by PIP. J Eur Ceram Soc. 2021;41(14):6905–14.
  12. Chung PP, EsFahani M, Wang J, et al. Effects of heat treatment on microstructure evolution and corrosion performance of mechanically plated zinc coatings. Surf Coatings Technol. 2019;377(August):124916.
  13. Xu M, Teng X, Yang C, et al. Effect of heat treatment on microstructure and mechanical properties of Mg94Zn2Y4 alloy. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Met Mater Eng. 2016;45(11):2804–8.
  14. Khabiri G, Aboraia AM, Soliman M, et al. A novel α-Fe2O3@MoS2QDs heterostructure for enhanced visible-light photocatalytic performance using ultrasonication approach. Ceram Int. 2020;46(11):19600–8.
  15. Lee H, Song MY, Ryu S, et al. Acetaldehyde oxidation under high humidity using a catalytic non-thermal plasma system over Mn-loaded Y zeolites. Mater Lett. 2020;262(xxxx):127051.
  16. Wu J, Xu X, Zhang X, et al. Effect of Heat Treatment on Microstructure and Mechanical Properties of Multiscale SiCp Hybrid Reinforced 6061 Aluminum Matrix Composites. J Wuhan Univ Technol Sci Ed. 2024;39(1):174–81.
  17. Xie Y, Zeng G, Zhang Y, et al. Time lapsed corrosion behavior of Zn-Mg composites fabricated by low-temperature sintering in simulated body fluid. Compos Commun. 2025;57:102445.
  18. Li M, Zhu Z, Zhang L, et al. Enhancement of mechanical, corrosion, and biocompatibility properties of zinc alloys through magnesium and neodymium alloying for bone implant applications. RSC Adv. 2025;15(53):45438–52.
  19. Vencl A, Šljivić V, Pokusová M, et al. Production, Microstructure and Tribological Properties of Zn-Al/Ti Metal-Metal Composites Reinforced with Alumina Nanoparticles. Int J Met. 2021;15(4):1402–11.
  20. Dai Q, Peng S, Zhang Z, et al. Microstructure and Mechanical Properties of Zinc Matrix Biodegradable Composites Reinforced by Graphene. 2021;9(March):1–14.
  21. Jiang P, Yang Y, Xie S, et al. Highly efficient and selective removal of U(VI) from acidic aqueous solution by chitosan/fluorapatite composite. J Radioanal Nucl Chem [Internet]. 2024;333(8):3921–35. Available from: http://dx.doi.org/10.1007/s10967-024-09553-z
Ahead of Print Subscription Original Research
Volume 14
02
Received 01/10/2025
Accepted 11/02/2026
Published 17/04/2026
Publication Time 198 Days
1

Login


My IP

PlumX Metrics