Study on Evaluation of Mechanical Properties of Kerb Stone Incorporating Polypropylene Material for Enhanced Durability and Performance

Notice

This is an unedited manuscript accepted for publication and provided as an Article in Press for early access at the author’s request. The article will undergo copyediting, typesetting, and galley proof review before final publication. Please be aware that errors may be identified during production that could affect the content. All legal disclaimers of the journal apply.

Year : 2025 | Volume : 13 | 05 | Page :
    By

    Vansh Gupta,

  • Karan Babbar,

  1. M. Tech Scholar, Department of Civil Engineering, Quantum University, Roorkee, Uttarakhand, India
  2. Assistant Professor, Department of Civil Engineering, Quantum University, Roorkee, Uttarakhand, India

Abstract

document.addEventListener(‘DOMContentLoaded’,function(){frmFrontForm.scrollToID(‘frm_container_abs_202104’);});Edit Abstract & Keyword

This study evaluates the mechanical properties of kerb stone incorporating polypropylene (PP) material, to enhance durability and performance. In the wake of increasing environmental concerns and the need for sustainable construction practices, the reuse of plastic waste, particularly polypropylene, has emerged as a promising solution. Polypropylene, known for its durability, resistance to chemical attacks, and low water absorption, offers significant potential when integrated into concrete products.

 

In this research, standard kerb stone specimens were modified with varying percentages of PP waste (0%, 2%, 4%, 6%, and 8%) and subjected to a series of mechanical tests, including compressive strength, flexural strength, and water absorption. The results showed that the inclusion of PP material, especially in the range of 4–6%, led to an improvement in both compressive and flexural strength compared to conventional kerb stones. Additionally, water absorption was marginally reduced, indicating improved durability. The study demonstrates that PP-modified kerb stones exhibit enhanced mechanical behavior and could serve as a sustainable alternative in pavement and roadside applications. The use of plastic waste not only enhances the properties of concrete but also provides an effective strategy for managing plastic waste, supporting circular economy principles. However, challenges such as the uniform dispersion of PP in concrete and long-term performance under environmental stressors warrant further investigation.

 

Overall, the study concludes that incorporating polypropylene waste into kerb stone production is both technically feasible and environmentally beneficial, paving the way for more sustainable and durable urban infrastructure solutions.

Keywords: Polypropylene Waste, Kerb Stone, Mechanical Properties, Compressive Strength, Flexural Strength, Water Absorption, Sustainable Construction.

aWQ6MjIzMTU1fGZpbGVuYW1lOjNkNDA2OWZlLWZpLmF2aWZ8c2l6ZTp0aHVtYm5haWw=
How to cite this article:
Vansh Gupta, Karan Babbar. Study on Evaluation of Mechanical Properties of Kerb Stone Incorporating Polypropylene Material for Enhanced Durability and Performance. Journal of Polymer and Composites. 2025; 13(05):-.
How to cite this URL:
Vansh Gupta, Karan Babbar. Study on Evaluation of Mechanical Properties of Kerb Stone Incorporating Polypropylene Material for Enhanced Durability and Performance. Journal of Polymer and Composites. 2025; 13(05):-. Available from: https://journals.stmjournals.com/jopc/article=2025/view=0


document.addEventListener(‘DOMContentLoaded’,function(){frmFrontForm.scrollToID(‘frm_container_ref_202104’);});Edit

References

 [1]. Al-Manaseer, A. A., and Dalal, T. R., “Concrete containing plastic aggregates,” Concrete International, vol. 19, no. 8, pp. 47–52, 1997.

[2]. Saikia, N., and de Brito, J., “Mechanical properties and abrasion behavior of concrete containing shredded plastic waste as a partial substitution of natural aggregate,” Construction and Building Materials, vol. 61, pp. 107–115, 2014.

[3]. Frigione, M., “Recycling of PET bottles as fine aggregate in concrete,” Waste Management, vol. 30, no. 6, pp. 1101–1106, 2010.

[4]. Siddique, R., Khatib, J., and Kaur, I., “Use of recycled plastic in concrete: A review,” Waste Management, vol. 28, no. 10, pp. 1835–1852, 2008.

[5]. Ismail, Z. Z., and Al-Hashmi, E. A., “Use of waste plastic in concrete mixture as aggregate replacement,” Waste Management, vol. 28, no. 11, pp. 2041–2047, 2008.

[6]. Ochi, T., Okubo, S., and Fukui, K., “Development of recycled PET fiber and its application as concrete-reinforcing fiber,” Cement and Concrete Composites, vol. 29, no. 6, pp. 448–455, 2007.

[7]. Koli, D. M., Memde, S. B., and Ghusurde, V. D., “Effect of polypropylene fiber on properties of concrete,” International Journal of Innovative Research in Science, Engineering and Technology, vol. 5, no. 2, pp. 2114–2119, 2016.

[8]. Modani, P. O., and Vyawahare, M. R., “Utilization of waste plastic in flexible pavement and its impact on properties of bitumen,” Procedia Engineering, vol. 51, pp. 207–213, 2013.

[9]. Zhang, M. H., Lastra, R., and Malhotra, V. M., “Rice-husk ash paste and concrete: Some aspects of hydration and the microstructure of the interfacial zone between the aggregate and paste,” Cement and Concrete Research, vol. 26, no. 6, pp. 963–977, 1996.

[10]. Alhozaimy, A. M., Soroushian, P., and Mirza, F., “Mechanical properties of polypropylene fiber reinforced concrete and the effect of pozzolanic materials,” Cement and Concrete Composites, vol. 18, no. 2, pp. 85–92, 1996.

[11]. Bentur, A., and Mindess, S., Fibre Reinforced Cementitious Composites, 2nd ed., CRC Press, 2006.

[12]. Mouli, M., and Taibi, H., “Mechanical properties of rubber waste-filled cementitious composites,” Construction and Building Materials, vol. 20, no. 10, pp. 823–827, 2006.

[13]. Kou, S. C., and Poon, C. S., “Properties of self-compacting concrete prepared with recycled glass aggregate,” Cement and Concrete Composites, vol. 31, no. 2, pp. 107–113, 2009.

[14]. Rahmani, E., Dehestani, M., Beygi, M. H. A., Allahyari, H., and Nikbin, I. M., “On the mechanical properties of concrete containing waste PET particles,” Construction and Building Materials, vol. 47, pp. 1302–1308, 2013.

[15]. Vaitkevicius, V., Vejelis, S., and Keriene, J., “Influence of plastic waste polymer addition on properties of plastering mortar,” Procedia Engineering, vol. 57, pp. 775–780, 2014.

[16]. Yung, W. H., Yung, L. C., and Hua, L. H., “A study of the durability properties of waste tire rubber applied to self-compacting concrete,” Construction and Building Materials, vol. 41, pp. 665–672, 2013.

[17]. Ravindrarajah, R. S., and Tam, C. T., “Properties of concrete made with crushed concrete as coarse aggregate,” Magazine of Concrete Research, vol. 37, no. 130, pp. 29–38, 1985.

[18]. Singh, M., and Siddique, R., “Effect of waste plastic on compressive strength and permeability of concrete,” Construction and Building Materials, vol. 146, pp. 594–602, 2017.

[19]. Bureau of Indian Standards, IS 516:1959 – Method of Tests for Strength of Concrete, New Delhi, India.

[20]. Bureau of Indian Standards, (Part 1):2005 – Concrete Masonry Units – Part 1: Hollow and Solid Concrete Blocks, New Delhi, India.

Ahead of Print Subscription Original Research
Volume 13
05
Received 20/06/2025
Accepted 04/07/2025
Published 01/08/2025
Publication Time 42 Days
36

[last_name]

My IP

PlumX Metrics