This is an unedited manuscript accepted for publication and provided as an Article in Press for early access at the author’s request. The article will undergo copyediting, typesetting, and galley proof review before final publication. Please be aware that errors may be identified during production that could affect the content. All legal disclaimers of the journal apply.
Oluwanifemi,
Abstract
The problem of environmental contamination, which is important for both public health and the economy, has been addressed through a great deal of research on the sterilization and disinfection of pollutants and microorganisms. Many types of pollutants and hazardous materials, such as microorganisms and toxic gases, are discharged into the environment and can enter the human body through ingestion, adsorption, or inhalation. Numerous respiratory conditions, strokes, lung cancer, and heart problems linked to these pollutants increase the mortality rate among humans. Therefore, in order to save lives, it is imperative to control environmental pollution by using cost-effective and efficient sterilization and disinfection techniques. Along with more sophisticated methods, there are many types of conventional physical and chemical sterilization and disinfection treatments, including ethylene oxide, ozone, hydrogen peroxide, radiation, filtration, dry and moist heat, and more. suggested both traditional and cutting-edge methods of disinfection and sterilization, along with their applications and mechanisms of action. Even though advanced sterilization and disinfection technologies provide an effective solution, combined sterilization and disinfection technologies have been shown to be a more effective innovation for protecting both indoor and outdoor environments. Nowadays, the importance of sterilization and disinfection for human health is a major concern because of the COVID-19 pandemic. For these methods, people are receiving a lot more attention. Natural resources have been drastically depleted in recent years due to the fast urbanization and industrialization processes, which include mining, transportation, manufacturing, construction, and petroleum refining.
Keywords: Sterilization, Disinfection, Environmental Contamination, Public Health, Hazardous Waste
[This article belongs to Journal of Catalyst & Catalysis (jocc)]
Oluwanifemi. Comprehensive Review on Sterilization Methods and Material Considerations. Journal of Catalyst & Catalysis. 2025; 12(02):-.
Oluwanifemi. Comprehensive Review on Sterilization Methods and Material Considerations. Journal of Catalyst & Catalysis. 2025; 12(02):-. Available from: https://journals.stmjournals.com/jocc/article=2025/view=0
References
-
Amit Kumar, Harveer Singh Pali, Manoj Kumar, “A comprehensive review on the production of alternative fuel through medical plastic waste,” Sustainable Energy Technologies and Assessments, Volume 55, 2023, 102924.
-
Mubarak Taiwo Mustapha, Dilber Uzun Ozsahin, Berna Uzun, Ilker Ozsahin, “Application of fuzzy TOPSIS in the sterilization of medical devices,” in Applications of Multi-Criteria Decision-Making Theories in Healthcare and Biomedical Engineering, Ilker Ozsahin, Dilber Uzun Ozsahin, Berna Uzun (Eds.), Academic Press, 2021, pp. 197-216.
-
S. Martin, E. Duncan, “Sterilisation considerations for implantable sensor systems,” in Implantable Sensor Systems for Medical Applications, Andreas Inmann, Diana Hodgins (Eds.), Woodhead Publishing Series in Biomaterials, Woodhead Publishing, 2013, pp. 253-278.
-
W.J. Rogers, “The effects of sterilization on medical materials and welded devices,” in Joining and Assembly of Medical Materials and Devices, Y. Zhou, Mark D. Breyen (Eds.), Woodhead Publishing Series in Biomaterials, Woodhead Publishing, 2013, pp. 79-130.
-
Joseph Tranquillo, Jay Goldberg, Robert Allen, “Detailed design,” in Biomedical Engineering Design, Joseph Tranquillo, Jay Goldberg, Robert Allen (Eds.), Biomedical Engineering, Academic Press, 2023, pp. 235-285.
-
Vinny R. Sastri, “Material requirements for plastics used in medical devices,” in Plastics in Medical Devices (Third Edition), Vinny R. Sastri (Ed.), Plastics Design Library, William Andrew Publishing, 2022, pp. 65-112.
-
Ilker Ozsahin, Dilber Uzun Ozsahin, “Decision-making models in healthcare applications,” in Applications of Multi-Criteria Decision-Making Theories in Healthcare and Biomedical Engineering, Ilker Ozsahin, Dilber Uzun Ozsahin, Berna Uzun (Eds.), Academic Press, 2021, pp. 165-196.
-
M.D. Breyen, Y. Zhou, “Advanced techniques in medical device assembly,” in Joining and Assembly of Medical Materials and Devices, Y. Zhou, Mark D. Breyen (Eds.), Woodhead Publishing Series in Biomaterials, Woodhead Publishing, 2013, pp. 131-160.
-
Andreas Inmann, Diana Hodgins, “Trends in implantable sensor technology,” in Implantable Sensor Systems for Medical Applications, Andreas Inmann, Diana Hodgins (Eds.), Woodhead Publishing Series in Biomaterials, Woodhead Publishing, 2013, pp. 279-310.
-
Robert Allen, Joseph Tranquillo, “Innovations in biomedical engineering design,” in Biomedical Engineering Design, Joseph Tranquillo, Jay Goldberg, Robert Allen (Eds.), Biomedical Engineering, Academic Press, 2023, pp. 201-234.
| Volume | 12 |
| Issue | 02 |
| Received | 10/02/2025 |
| Accepted | 14/02/2025 |
| Published | 15/02/2025 |
async function fetchCitationCount(doi) {
let apiUrl = `https://api.crossref.org/works/${doi}`;
try {
let response = await fetch(apiUrl);
let data = await response.json();
let citationCount = data.message[“is-referenced-by-count”];
document.getElementById(“citation-count”).innerText = `Citations: ${citationCount}`;
} catch (error) {
console.error(“Error fetching citation count:”, error);
document.getElementById(“citation-count”).innerText = “Citations: Data unavailable”;
}
}
fetchCitationCount(“.v12i02.0”);