Open Access
Sumedh Kishor Limaye,
, Umesh L. Deshpande,
- P.G. Student (Civil-Structural Engineering), Government College of Engineering Karad, Maharashtra, India
- Associate Professor, Department of Applied Mechanics, Government College of Engineering Karad, Maharashtra, India
Abstract
Study of behavior of composite building with Concrete-Encased Steel (CES) columns for blast loading is done. This is compared with the behavior of conventional building having reinforced concrete (RC) columns. In the following study, both composite and RC buildings are subjected to 0.1 ton, 0.3 ton and 0.5 ton TNT equivalent charge weight of blast load with a standoff distance of 20 m, 30 m and 40 m. To study the static properties due to variation in standoff distance and blast intensity, (G+4) buildings with composite and RC columns are analyzed using parameters like storey displacement, storey drift, bending moment are compared. The Linear Static Analysis is carried out by using ETABS 2018 software. From the results obtained, it is observed that the vulnerability of a multi-storey structure is least for a low intensity blast generated at a comfortably longer standoff distance.
Keywords: Blast, TNT, loading, CES-column, composite, standoff distance, ETABS
Sumedh Kishor Limaye, , Umesh L. Deshpande. Analytical Study of Concrete-encased Steel Column Building against Blast Load. Journal of Structural Engineering and Management. 2023; ():-.
Sumedh Kishor Limaye, , Umesh L. Deshpande. Analytical Study of Concrete-encased Steel Column Building against Blast Load. Journal of Structural Engineering and Management. 2023; ():-. Available from: https://journals.stmjournals.com/josem/article=2023/view=90271
References
1. Nourzadeh D, Humar Jagmohan, Braimah Abass. Comparison of response of building structures to Blast Loading and seismic excitations. Procedia Eng. December 2017;210:320–5. doi: 10.1016/j.proeng.2017.11.083.
2. Abdullah Mohammad M, Osman Bashir H. Numerical analysis of steel building under Blast Loading. Int J Eng Res Technol. November 2014.
3. Sevim Barış, Toy Ahmet Tuğrul. Blasting response of a two storey RC building under different charge weight of TNT explosives. Iran J Sci Technol Trans Civ Eng. 2020;44(2):565–77. doi:
10.1007/s40996–019–00256–0.
4. Goel Manmohan Dass, Matsagar Vasant A. Blast-resistant design of structures. Pract Period Struct Des Constr ASCE-ISSN. August 2013:1084–0680/04014007.
5. Wu Ke-Chiang, Li B, Tsai K. The Effects of explosive mass ratio on residual compressive capacity of contact blast damaged composite columns. J Constr Steel Res. 2011;67(4):602–12. doi: 10.1016/j.jcsr.2010.12.001.
6. Guzas Emily L, Earls Christopher J. Simulating blast effects on steel beam-column members: methods. Comput Struct. September 2011;89(23–24):2133–48. doi: 10.1016/j.compstruc.2011.08.014.
7. Denny Jack W, Clubley Simon K. Long-duration blast loading and response of steel column sections at different angles of incidence. Eng Struct. 2019;178:331–42. doi: 10.1016/j.engstruct.2018.10.019.
8. Khan Sameer, Saha Sandip Kumar et al. Fragility of steel frame buildings under Blast Load. J Perform Constr Facil ASCE ISSN. February 2017;3828:0887.
9. Lai Binglin, Richard Liew JY, Wang Tongyun. Buckling behaviour of high strength concrete encased steel composite columns. J Constr Steel Res. 2019;154:27–42. doi: 10.1016/j.jcsr.2018.11.023.
10. Figuli Lucia, Bedon Chiara, Zvaková Z, Jangl Š, Kavický V. Dynamic analysis of a blast loaded steel structure. Procedia Eng. 2017;199:2463–9. doi: 10.1016/j.proeng.2017.09.388.
11. Unified Facilities Criteria (UFC) Manual 2008. Structures to Resist the Effects of Accidental Explosions. United States and America: Department of Defense.
Journal of Structural Engineering and Management
Volume | |
Received | 15/02/2021 |
Accepted | 20/04/2021 |
Published | 20/04/2023 |