Usage of Fly Ash and Slag as Supplementary Cementitious Materials in Engineered Cementitious Composites (ECCs): A Review

Open Access

Year : 2023 | Volume : | : | Page : –
By

S. Naveen1

Govardhan Bhat

  1. PhD Scholar Department Civil Engineering, National Institute of Technology Raipur Chhattisgarh India
  2. Assistant Professor Department Civil Engineering National Institute of Technology Raipur Chhattisgarh India

Abstract

Researchers evolved Engineered Cementitious Composite (ECC) in the nineties, which belong to the family of high-performance fibre-reinforced cementitious composites. ECC is additionally known as bendable concrete as a ductile alternative to conventional concrete. ECC requires a huge amount of supplementary cementitious material (fly ash), contributing to sustainable development. In this study, a review of ECC has been studied with supplementary cementitious materials which include fly ash and slag. ECC has better tensile strength, ductility and durability properties than other kinds of fibre reinforced concrete (FRC). The results are primarily based on the properties of ECC with fly ash and slag. This research work affords an exhaustive overview of ECC with the aid of incorporating fly ash and slag as supplementary cementitious substances. The impact of fly ash fineness, the calcium content of fly ash, fly ash content, and slag on various properties of ECC are taken into consideration. Also studied the effect on the strength of ECC with fly ash at increased temperature.

Keywords: ECC, supplementary cementitious materials, fly ash, slag, calcium content fineness, ductility

How to cite this article: S. Naveen1, Govardhan Bhat. Usage of Fly Ash and Slag as Supplementary Cementitious Materials in Engineered Cementitious Composites (ECCs): A Review. International Journal of Concrete Technology. 2023; ():-.
How to cite this URL: S. Naveen1, Govardhan Bhat. Usage of Fly Ash and Slag as Supplementary Cementitious Materials in Engineered Cementitious Composites (ECCs): A Review. International Journal of Concrete Technology. 2023; ():-. Available from: https://journals.stmjournals.com/ijct/article=2023/view=90217

Full Text PDF Download

References

1. Mustafa Sahmaran, Gurkan Yildirim, Erdem Tahir K. Self-healing capacity of cementitious composite incorporating different supplementary cementitious materials. Cem Concr Compos. 2013; 35: 89–101.
DOI: 10.1016/j.cemconcomp.2012.08.013
2. Gurkan Yildirum, Ozlem Kaasap Keskin, Suleyman Bahadir Keskin, Mustafa Sahmaran. Review of intrinsic self-healing capacity of engineered cementitious composites: Recovery of transport and mechanical properties. Constr Build Mater. 2015; 101: 10–21. DOI: 10.1016/j.Conbuildmat.2015.10.018.
3. Jiangato Yu, Jianhui Lin, Zhigang Zhang, Li Victor C. Mechanical performance of ECC with high volume fly ash after sub-elevated temperatures. Constr Build Mater. 2015; 99: 82–89. DOI: 10.1016/j. Conbuildmat. 2015.10.018.
4. Li-li Kan, Ruo-Xin Shi, Jin Zhu. Effect of fineness and calcium content of fly ash on the mechanical properties of ECC. Constr Build Mater. 2019; 209: 476–484. DOI: 10.1016/j.conbuildmat.2019.03.129.
5. Hezhi Liu, Qian Zhang, Chongshi Gu, Huaizhi Su, Victor Li. Self -healing of microcracks in Engineered Cementitious Composites under sulfate and chloride environment. Constr Build Mater. 2017; 153: 948–956. DOI: 10.1016/j.conbuildmat.2017.07.126
6. Mustafa Sahmaran, Erdogan Ozbay, Yucel Hasan E, Mohamed Lachemi, Li Victor C. Frost resistance and microstructure of Engineered Cementitious Composites: Influence of fly ash and micro poly-vinyl-alcohol fiber. Cem Concr Compos. 2012; 34: 156–165. DOI: 10.1016/j.cemconcomp.2011.10.002
7. Yu Zhu, Yingzi Yang, Yan Yao. Use of slag to improve mechanical properties of engineered cementitious composites (ECCs) with high volumes of fly ash. Constr Build Mater. 2012; 36: 1076– 1081. DOI: 1016/j.conbuildmat.2012.04.031.
8. Kamile Tosun-Felekoglu, Eren Godek, Muhammer Keskinates, Burak Felekoglu. Utilization and selection of proper fly ash in cost-effective green HTPP-ECC design. J Clean Prod. 2017; 149: 557– 568. DOI: 10.1016/j.jclepro.2017.02.117
9. Rashad Alaa M. An exploratory study on high-volume fly ash concrete incorporating silica fume subjecting to thermal load. J Clean Prod. 2015; 87: 735–744. DOI: 10.1016/j.jclepro.2014.09.018 10. Paris Jerry M, Roessler Justin G, Ferraro Christopher C, DeFord Harvey D, Townsend Timothy G. A review of waste products utilized as supplements to Portland cement in concrete. J Clean Prod. 2016; 121: 1–18. DOI: 10.1016/j.jclero.2016.02.013.
11. Megat Johari MA, Brooks JJ, Shahid Kabir, Patrice Rivard. Influence of supplementary cementitious materials on engineering properties of high strength concrete. Constr Build Mater. 2011; 25: 2639–2648. DOI: 10.1016/j.conbuildmat.2010.12.013
12. Yu Zhu, Zhacai Zhang, Yingzi Yang, Yan Yao. Measurement and correlation of ductility and compressive strength for engineered cementitious composites (ECC) produced by binary and ternary systems of binder materials: fly ash, slag, silica fume and cement. Constr Build Mater. 2014; 68: 192–198. DOI: 10.1016/j.conbuildmat.2014.06.080
13. Tahir Kemal Erdem. Specimen size effect on the residual properties of engineered cementitious composites subjected to high temperatures. Cem Concr Compos. 2014; 45: 1–8. DOI: 10.1016/j.cemconcomp.2013.09.019
14. Yu Ke-quan, Lu Zhou-dao, Yu Jiangtao. Residual compressive properties of strain-hardening cementitious composite with different curing ages exposed to high temperature. Constr Build Mater. 2015; 98: 146–155. DOI: 10.1016/j.conbuildmat.2015.08.041.


Open Access Article
Volume
Received March 19, 2021
Accepted April 22, 2021
Published April 22, 2023