Total Articles : 127
Chitosan-Based Polymer Coatings for Antimicrobial Catheter Surfaces
Abstract: Catheter-associated infections (CAIs) remain a major clinical challenge. Microbial adhesion and subsequent biofilm formation on catheter surfaces significantly reduce the effectiveness of antimicrobial therapy, resulting in prolonged hospitalization, …
[This section belongs to Journal of Polymer & Composites ]
Durability study of flyash induced polypropylene fiber reinforced concrete
Abstract: The need for sustainable and durable construction materials has led to the use of supplementary cementitious materials and synthetic fibers in concrete. The use of fly ash and polypropylene fibers (PPF) could improve the mechanical properties and …
[This section belongs to Journal of Polymer & Composites ]
Development and Multiscale Characterisation of a Sustainable Hybrid Polymer–Cementitious Composite
Abstract: The development of sustainable polymer–cementitious composites has gained increasing attention as a strategy for reducing virgin resource consumption while improving the mechanical and functional performance of cement-based materials. This study …
[This section belongs to Journal of Polymer & Composites ]
Integration of Green-Synthesized Calcium Nanoparticles in Natural Polymer Matrices by Bio-Nanocomposite Approach to Calcium Fortification
Abstract: Calcium deficiency continues to pose a widespread nutritional challenge, particularly in vulnerable populations. In this study, a bio-nanocomposite-based fortification strategy was developed using calcium nanoparticles (CaNPs) synthesized via green …
[This section belongs to Journal of Polymer & Composites ]
Federated Learning Framework for Sustainable Multi-Scale Design of Recyclable Thermoplastic Graphene Composites in Smart Manufacturing Environments
Abstract: The growing demand for sustainable advanced materials has accelerated the development of recyclable thermoplastic graphene composites for next-generation smart manufacturing systems. The typical central optimization methods have challenges with data …
[This section belongs to Journal of Polymer & Composites ]
Triboelectric Charge Density Enhancement in Zinc Oxide Decorated Polymer Nanogenerators for Energy Harvesting Systems
Abstract: The growing need for wearable electronics, wireless sensor networks, and IoT devices has pushed research on triboelectric nanogenerator for long-term energy harvesting. However, traditional polymer-based TENGs’ low triboelectric charge density …
[This section belongs to Journal of Polymer & Composites ]
Physics-Informed Machine Learning and Multiscale Modeling for Structure–Property Quantification of Polymer Composites
Abstract: The growing need for light-weight, high strength, and sustainable polymer composites has led to the development of smart methods that enable accurate structural-property quantification and material design. However, conventional methods have been …
[This section belongs to Journal of Polymer & Composites ]
Fabrication, Interfacial Characterization, and Superparamagnetic Properties of Fe₃O₄@γ-Fe₂O₃ Core/Shell Nanoparticle-Reinforced Chitosan Biopolymer Composites
Abstract: Magnetite/maghemite core/shell nanoparticles were prepared by alkaline co-precipitation of Fe(II) and Fe(III) precursors followed by controlled thermal oxidation at 350 °C and subsequently incorporated into chitosan at 1, 3, and 5 wt% loadings by …
[This section belongs to Journal of Polymer & Composites ]
Conductive Polymer Nanocomposites for Wearable Cardiac Monitoring Devices
Abstract: Wearable cardiac monitoring devices are increasingly important tools for non-invasive, continuous assessment of cardiac health. Their growth is driven by increases in the incidence of arrhythmias and by a great demand for remote monitoring. This is …
[This section belongs to Journal of Polymer & Composites ]
Radiopaque Polymer Composites for Improved Visualization of Interventional Devices
Abstract: Radiopaque polymer composites are increasingly important for improving the visualization of interventional medical devices under X-ray and fluoroscopic imaging while maintaining the flexibility, mechanical performance, and processability required for …
[This section belongs to Journal of Polymer & Composites ]