Total Articles : 125
Thermo-Hydraulic Performance of a Double-Pipe Double-Pass Heat Exchanger using Annular Fins and Graphite-filled Epoxy Composite Tubes
Abstract: Double-pipe heat exchangers remain one of the most widely adopted thermal devices because of their simple construction, operational reliability, and ease of maintenance. Nevertheless, their performance is often constrained by the limited heat …
[This section belongs to Journal of Polymer & Composites ]
Polymer Composite Phase Change Materials: Materials Design, Processing, Characterization, and Structure–Property Relationships—A Comprehensive Review
Abstract: Polymer composite phase change materials (PCPCMs) have been recognized as an innovative category of multifunctional polymeric materials, which could be tuned by appropriate materials design, composite formation, and interface modification. With the …
[This section belongs to Journal of Polymer & Composites ]
Polymer Composite Phase Change Materials: Materials Design, Processing, Characterization, and Structure–Property Relationships—A Comprehensive Review
Abstract: Polymer composite phase change materials (PCPCMs) have been recognized as an innovative category of multifunctional polymeric materials, which could be tuned by appropriate materials design, composite formation, and interface modification. With the …
[This section belongs to Journal of Polymer & Composites ]
Multifunctional Lignin-Modified Jute/Bio-Epoxy Composites with MWCNT-Based Piezoresistive Self-Sensing for Sustainable Housing Applications
Abstract: This study develops a multifunctional natural-fibre-reinforced polymer composite based on alkali-treated jute fabric, bio-based epoxy, kraft lignin and a small amount of multiwalled carbon nanotubes (MWCNTs), with particular emphasis on …
[This section belongs to Journal of Polymer & Composites ]
Numerical Investigation of Ply-by-Ply Failure and Strength Degradation in Composite Laminates Under Transverse Loading
Abstract: This paper represents the failure analysis of composite symmetric and antisymmetric laminate, when laminates were subjected to the transverse loading conditions. The load is uniformly distributed in a transverse direction. The analysis includes …
[This section belongs to Journal of Polymer & Composites ]
An Aggregate-Breakage Percolation Model and ANN-Based Internal Validation for Curvature-Dependent Electrical Conductivity of MWCNT/TPU Nanocomposites
Abstract: Strain-dependent percolation models are mostly built and tested for uniaxial tension, yet many flexible sensors and stretchable devices work mainly in bending, where the outer fibre is stretched, the inner fibre is compressed and the strain changes …
[This section belongs to Journal of Polymer & Composites ]
Experimental Analysis and Validation of Cellulose Fibre Insulation Structures Considering Thermal Properties
Abstract: Cellulose fibre insulation structures made from used newspaper can be installed in attics, filling gaps between doors and windows. Many researchers focused on loose-filled cellulose fibre insulation. This study investigates the thermal conductivity, …
[This section belongs to Journal of Polymer & Composites ]
Geosynthetic polymeric material Reinforced Model Shallow Foundation’s Monotonic and Cyclic Uplift Response Affected by Ground Inclination
Abstract: The foundation system of any structure is vital for ensuring safety, serviceability, and performance, particularly when subjected to vertical and uplift forces. While conventional foundations are primarily designed to resist compressive loads, …
[This section belongs to Journal of Polymer & Composites ]
Polymer and Polymer-Metallic Reflective Materials for Solar Thermal Applications: A review
Abstract: Reflective materials play a critical role in determining the optical and thermal performance of solar thermal systems by controlling the concentration and utilization of incident solar radiation. This review examines the application and performance …
[This section belongs to Journal of Polymer & Composites ]
Thermo-hydraulic Performance of Multi-Pass Double-Pipe Heat Exchangers: Integrating Polymer Composite Tube Wall Materials via CFD Parametric Study and Experimental Validation
Abstract: Metallic materials such as steel and copper have traditionally dominated heat exchanger manufacturing because of their excellent thermal conductivity, mechanical strength, and long-established industrial reliability. However, their high weight, …
[This section belongs to Journal of Polymer & Composites ]