Total Articles : 127
Thermo-hydraulic Performance of Multi-Pass Double-Pipe Heat Exchangers: Integrating Polymer Composite Tube Wall Materials via CFD Parametric Study and Experimental Validation
Abstract: Metallic materials such as steel and copper have traditionally dominated heat exchanger manufacturing because of their excellent thermal conductivity, mechanical strength, and long-established industrial reliability. However, their high weight, …
[This section belongs to Journal of Polymer & Composites ]
Hybrid Machine Learning and Finite Element Framework for Predicting Damage Behavior in Fiber-Reinforced Polymer Composites
Abstract: Fiber Reinforced Polymer (FRP) composites have broad spread use in aerospace, automotive, marine and structural applications due to its high specific strength, stiffness and corrosion resistance. The various damage mechanisms such as matrix cracking, …
[This section belongs to Journal of Polymer & Composites ]
A IoT-Enabled Predictive Intelligence for Real-Time Failure and Damage Evolution Monitoring of Polymer Composites
Abstract: Damage assessment of carbon-fibre-reinforced polymer composites is still challenging since the damage occurs as a combination of matrix cracking, interfacial debonding, delamination and fibre fracture. The present work proposes a framework for …
[This section belongs to Journal of Polymer & Composites ]
Implement Artificial Intelligence and Machine Learning for Engineering Design, Predictive Modeling, and Optimizing Polymer Nanocomposites
Abstract: Polymer nanocomposites are high performance engineered materials obtained by inclusion of nano-sized fillers into the polymer matrix to enhance mechanical, thermal, electrical, barrier and functional properties. However, the complex and non-linear …
[This section belongs to Journal of Polymer & Composites ]
Mechanical Characterization of Untreated Banana Fiber Reinforced PLA Bio-Composites Manufactured by 3D Printing
Abstract: This study investigates the development and mechanical characterization of fused deposition modeling (FDM) filaments utilizing polylactic acid (PLA) reinforced with untreated banana fibers (BF). To address the brittleness of pure PLA and valorize …
[This section belongs to Journal of Polymer & Composites ]
An Experimental Study on the Fabrication and Mechanical Properties of Natural Fiber Reinforced Polymer Hybrid Composites
Abstract: Natural fiber-reinforced polymer composites are increasingly investigated as lower-impact alternatives to conventional synthetic fiber systems. This work fabricated and mechanically characterized a sisal-coconut coir fiber-reinforced epoxy hybrid …
[This section belongs to Journal of Polymer & Composites ]
Microstructural Evolution and Mechanical Performance of Ambient-Cured Fly Ash–Metakaolin Inorganic Polymer Composites Activated by Anhydrous Sodium Silicate Powder
Abstract: Inorganic geopolymer networks offer a low-carbon and sustainable solution to traditional binder systems through the alkali-activation of industrials-grade aluminosilicate material. The present paper focuses on the microstructure development and the …
[This section belongs to Journal of Polymer & Composites ]
Gamma- and Electron Beam-Induced Crystalline modification in Poly (Lactic Acid): Effects of Radiation Dose and Dose Rate
Abstract: Poly(lactic acid) (PLA) is an important commercial biodegradable polyester whose properties are dictated by its molecular architecture and semicrystalline nature. The application of ionizing radiation particularly gamma rays and electron beams is …
[This section belongs to Journal of Polymer & Composites ]
Mechanical and Morphological Characterization of Halloysite Nanotube (HNT) Reinforced Urethane Dimethacrylate (UDMA) Dental Composites
Abstract: Dental resin composites are widely used in restorative dentistry because of their excellent aesthetics, conservative cavity preparation, and satisfactory mechanical properties. However, their long-term clinical performance is limited by …
[This section belongs to Journal of Polymer & Composites ]
Optimizing Performance Characteristics, Thermal Stability, and Manufacturing Performance of Polymer Nanocomposites Using Artificial Intelligence
Abstract: Artificial intelligence (AI) has proven an efficient method to optimize the design and manufacture of polymer nanocomposites, allowing the proper prediction of the behavior of the materials and the results of the processing. This work proposes an …
[This section belongs to Journal of Polymer & Composites ]