Valorization of Human and Cattle Dental Waste into Functional Composite Biomaterials: A Detailed Comparative Analysis

Notice

This is an unedited manuscript accepted for publication and provided as an Article in Press for early access at the author’s request. The article will undergo copyediting, typesetting, and galley proof review before final publication. Please be aware that errors may be identified during production that could affect the content. All legal disclaimers of the journal apply.

Year : 2026 | Volume : 14 | 03 | Page :
    By

    Subhasis Nath,

  • Sourav Debnath,

  • Soumya Mukherjee,

  • Sujan Krishna Samanta,

  1. Principal, Department of Mechanical Engineering, Central Tool Room and Training Center, Kolkata, West Bengal, India
  2. Assistant Professor, Department of Electrical Engineering, Brainware University, Kolkata, West Bengal, India
  3. Assistant Professor, Department of Metallurgical Engineering, Kazi Nazrul University, Asansol, West Bengal, India
  4. Associate Professor, Department of Biomedical Engineering, Netaji Subhash Engineering College, Kolkata, West Bengal, India

Abstract

This study investigates the conversion of human and cattle (goat and cow) teeth into bioactive hydroxyapatite-based composites and presents a detailed comparative evaluation of these biogenic materials with laboratory-synthesised (synthetic) hydroxyapatite (HAp). In this work, hydroxyapatite was extracted from human and bovine teeth through controlled calcination and milling, while synthetic HAp was prepared using a standard wet chemical precipitation route. All materials were subsequently sintered at 900 °C and fabricated into pellets for physical and biological analysis. X-ray diffraction (XRD) analysis confirmed that all samples—synthetic and biogenic—possessed crystalline structures consistent with stoichiometric hexagonal hydroxyapatite. FTIR spectra revealed characteristic phosphate, hydroxyl, and carbonate functional groups, with biogenic samples showing slightly higher carbonate substitution. Physical characterization demonstrated comparable hardness, shrinkage behaviour, densification, and porosity among the samples, with only minor variations attributable to natural ionic substitutions present in biological apatite. SEM analysis revealed interconnected porous microstructures favourable for osteoconduction, while pore-size distribution remained consistent across all groups. A strong negative correlation between porosity and hardness (r = –0.996) affirmed the influence of pore architecture on mechanical properties. Biological evaluations validated the suitability of the materials for biomedical use. MTT cytotoxicity assays demonstrated high cell viability (>95%) for all samples, indicating excellent cytocompatibility. Haemolysis percentages remained below the ASTM threshold of 5%, confirming hemocompatibility. Simulated Body Fluid (SBF) immersion studies showed enhanced apatite formation in biogenic HAp compared to synthetic HAp, highlighting superior bioactivity due to natural trace ions and surface reactivity. The findings establish human and cattle teeth as promising, sustainable resources for producing high‑quality hydroxyapatite suitable for applications in bone regeneration, implant coatings, and other biomedical domains.

Keywords: Biomedical waste, Haemocompatibility, Teeth, Cattle, Bioactive biomaterials.

How to cite this article:
Subhasis Nath, Sourav Debnath, Soumya Mukherjee, Sujan Krishna Samanta. Valorization of Human and Cattle Dental Waste into Functional Composite Biomaterials: A Detailed Comparative Analysis. Journal of Polymer & Composites. 2026; 14(03):-.
How to cite this URL:
Subhasis Nath, Sourav Debnath, Soumya Mukherjee, Sujan Krishna Samanta. Valorization of Human and Cattle Dental Waste into Functional Composite Biomaterials: A Detailed Comparative Analysis. Journal of Polymer & Composites. 2026; 14(03):-. Available from: https://journals.stmjournals.com/jopc/article=2026/view=243129


References

[1]      K. Manickaraj et al., “Value-added utilization of agricultural wastes in biocomposite production: Characteristics and applications,” Jul. 01, 2025, John Wiley and Sons Inc. doi: 10.1111/nyas.15368.

[2]      a A. K. S. P. and N. A. Rajkumar Ramasubbu, “Mechanical Properties of Epoxy Composites Reinforced with Areca catechu Fibers Containing Silicon Carbide,” Bioresources, no. 2, pp. 2353–2370, 2024, doi: DOI:10.15376/biores.19.2.2353-2370.

[3]      S. Palanisamy et al., “Effects of fiber loadings and lengths on mechanical properties of Sansevieria Cylindrica fiber reinforced natural rubber biocomposites,” Mater. Res. Express, vol. 10, no. 8, Aug. 2023, doi: 10.1088/2053-1591/acefb0.

[4]      N. Ayrilmis, G. Kanat, E. Yildiz Avsar, S. Palanisamy, and A. Ashori, “Utilizing waste manhole covers and fibreboard as reinforcing fillers for thermoplastic composites,” Journal of Reinforced Plastics and Composites, vol. 44, no. 17–18, pp. 1108–1118, Sep. 2025, doi: 10.1177/07316844241238507.

[5]      a,* S. P. T. mani M. S. T. R. K. S. A. and C. S. e Murugesan Palaniappan, “Influence of Washing with Sodium Lauryl Sulphate (SLS) Surfactant on Different Properties of Ramie Fibres,” Bioresources, no. 19 (2), pp. 2609–2625, doi: DOI:10.15376/biores.19.2.2609-2625.

[6]      B. Mylsamy, K. Aruchamy, S. K. Marudhamuthu Shanmugam, S. Palanisamy, and N. Ayrılmis, “Improving performance of composites: Natural and synthetic fibre hybridisation techniques in composite materials – A review,” Apr. 01, 2025, Elsevier Ltd. doi: 10.1016/j.matchemphys.2025.130439.

[7]      H. Boukhris, H. Zidani, A. B. H. Khalifa, G. Bouslema, and S. B. Youssef, “Environmental Impact of Dental Waste: A Survey-based Analysis of Waste Segregation and Recycling Practices in Dental Clinics,” Journal of Contemporary Dental Practice, vol. 26, no. 3, pp. 250–256, 2025, doi: 10.5005/jp-journals-10024-3845.

[8]      E. Klimuszko, K. Orywal, T. Sierpinska, J. Sidun, and M. Golebiewska, “Evaluation of calcium and magnesium contents in tooth enamel without any pathological changes: in vitro preliminary study,” Odontology, vol. 106, no. 4, pp. 369–376, Oct. 2018, doi: 10.1007/s10266-018-0353-6.

[9]      J. T. B. Ratnayake, M. Mucalo, and G. J. Dias, “Substituted hydroxyapatites for bone regeneration: A review of current trends,” J. Biomed. Mater. Res. B Appl. Biomater., vol. 105, no. 5, pp. 1285–1299, Jul. 2017, doi: 10.1002/jbm.b.33651.

[10]    G. Tripathi and B. Basu, “A porous hydroxyapatite scaffold for bone tissue engineering: Physico-mechanical and biological evaluations,” Ceram. Int., vol. 38, no. 1, pp. 341–349, Jan. 2012, doi: 10.1016/j.ceramint.2011.07.012.

[11]    F. B. Bagambisa and U. Joos, “Preliminary studies on the phenomenological behaviour of osteoblasts cultured on hydroxyapatite ceramics,” Biomaterials, vol. 11, no. 1, pp. 50–56, Jan. 1990, doi: 10.1016/0142-9612(90)90052-R.

[12]    P. R. Dev, C. P. Anand, D. S. Michael, and P. Wilson, “Hydroxyapatite coatings: a critical review on electrodeposition parametric variations influencing crystal facet orientation towards enhanced electrochemical sensing,” Sep. 06, 2022, Royal Society of Chemistry. doi: 10.1039/d2ma00620k.

[13]    T. Hoai, N. K. Nga, G. Luu Truong, T. Huy, T. Phan Nguyen, and B. Binh, “Hydrothermal Synthesis of Hydroxyapatite Nanorods for Rapid Formation of Bone-Like Mineralization,” J. Electron. Mater., vol. 46, Apr. 2017, doi: 10.1007/s11664-017-5509-6.

[14]    Y. Chang-Chen et al., “Hydrothermal synthesis of hydroxyapatite nanoparticles using biosurfactant and application on mesenchymal stem cells,” Ceram. Int., vol. 51, Feb. 2025, doi: 10.1016/j.ceramint.2025.02.088.

[15]    G. Guo, Y. Wang, Z. Wang, and H. Guo, “Study on the synthesis of hydroxyapatite nanoparticles by the chemical precipitation method,” vol. 67, pp. 830–834, Jan. 2004.

[16]    I. Sopyan, R. Singh, and M. Abd Shukor, “Synthesis of nano sized hydroxyapatite powder using sol-gel technique and its conversion to dense and porous bodies,” Indian Journal of Chemistry Section a, vol. 47, pp. 1626–1631, Nov. 2008.

[17]    S. Jarudilokkul, W. Tanthapanichakoon, and V. Boonamnuayvittaya, “Synthesis of hydroxyapatite nanoparticles using an emulsion liquid membrane system,” Colloids Surf. A Physicochem. Eng. Asp., vol. 296, pp. 149–153, Mar. 2007, doi: 10.1016/j.colsurfa.2006.09.038.

[18]    I. Kimura, “Synthesis of Hydroxyapatite by Interfacial Reaction in a Multiple Emulsion,” Research Letters in Materials Science, vol. 2007, pp. 1–4, 2007, doi: 10.1155/2007/71284.

[19]    M. S. Baltatu, A. V. Sandu, M. Nabialek, P. Vizureanu, and G. Ciobanu, “Biomimetic deposition of hydroxyapatite layer on titanium alloys,” Micromachines (Basel)., vol. 12, no. 12, Dec. 2021, doi: 10.3390/mi12121447.

[20]    F. L. Muntean et al., “Hydroxyapatite from Mollusk Shells: Characteristics, Production, and Potential Applications in Dentistry,” Dec. 01, 2024, Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/dj12120409.

[21]    M. Saravanan, S. Krishnamoorthi, N. Rajaram, and M. Saravanakumar, “Synthesis of Nano-Hydroxyapatite from Sea Shell and Squid Bone Waste for Advanced Bone Applications via Precipitation Process,” SSRG International Journal of Mechanical Engineering, vol. 12, no. 9, pp. 130–138, Sep. 2025, doi: 10.14445/23488360/IJME-V12I9P113.

[22]    C. Y. Ooi, M. Hamdi, and S. Ramesh, “Properties of hydroxyapatite produced by annealing of bovine bone,” Ceram. Int., vol. 33, no. 7, pp. 1171–1177, Sep. 2007, doi: 10.1016/j.ceramint.2006.04.001.

[23]    S. Joschek, B. Nies, R. Krotz, and A. Göpferich, “Chemical and physicochemical characterization of porous hydroxyapatite ceramics made of natural bone,” Biomaterials, vol. 21, no. 16, pp. 1645–1658, Aug. 2000, doi: 10.1016/S0142-9612(00)00036-3.

[24]    C. Balázsi, F. Wéber, Z. Kövér, E. Horváth, and C. Németh, “Preparation of calcium-phosphate bioceramics from natural resources,” J. Eur. Ceram. Soc., vol. 27, no. 2–3, pp. 1601–1606, 2007, doi: 10.1016/j.jeurceramsoc.2006.04.016.

[25]    G. Gergely et al., “Preparation and characterization of hydroxyapatite from eggshell,” Ceram. Int., vol. 36, pp. 803–806, Mar. 2010, doi: 10.1016/j.ceramint.2009.09.020.

[26]    J. Rocha et al., “Scaffolds for Bone Restoration From Cuttlefish,” Bone, vol. 37, pp. 850–857, Jan. 2006, doi: 10.1016/j.bone.2005.06.018.

[27]    H. L. Jaber, A. S. Hammood, and N. Parvin, “Synthesis and characterization of hydroxyapatite powder from natural Camelus bone,” Journal of the Australian Ceramic Society, vol. 54, no. 1, pp. 1–10, Mar. 2018, doi: 10.1007/s41779-017-0120-0.

[28]    Y. Z. Wan et al., “Synthesis and characterization of hydroxyapatite–bacterial cellulose nanocomposites,” Compos. Sci. Technol., vol. 66, no. 11–12, pp. 1825–1832, Sep. 2006, doi: 10.1016/j.compscitech.2005.11.027.

[29]    A. Ruksudjarit, K. Pengpat, G. Rujijanagul, and T. Tunkasiri, “Synthesis and characterization of nanocrystalline hydroxyapatite from natural bovine bone,” Current Applied Physics, vol. 8, no. 3–4, pp. 270–272, May 2008, doi: 10.1016/j.cap.2007.10.076.

[30]    D. & S. S. & D. S. & R. S. & B. P. & N. Samit. Acharjee, “Journal of mines metals and fuels,” Journal of Mines, Metals and Fuels, vol. 71, no. 11, pp. 1–8, Dec. 2023, Accessed: Sep. 01, 2024. [Online]. Available: DOI: https://doi.org/10.18311/jmmf/2023/33731

[31]    S. K. Samanta and A. Chanda, “Study on different characteristics of doped tri calcium phosphate at different sintering temperatures,” in AIP Conference Proceedings, American Institute of Physics Inc., Apr. 2016. doi: 10.1063/1.4945162.

[32]    T. Kokubo and H. Takadama, “How useful is SBF in predicting in vivo bone bioactivity?,” Biomaterials, vol. 27, no. 15, pp. 2907–2915, 2006, doi: 10.1016/j.biomaterials.2006.01.017.

[33]    T. Kokubo, H. Kushitani, S. Sakka, T. Kitsugi, and T. Yamamuro, “Solutions able to reproduce in vivo surface‐structure changes in bioactive glass‐ceramic A‐W3,” J. Biomed. Mater. Res., vol. 24, no. 6, pp. 721–734, 1990, doi: 10.1002/jbm.820240607.

[34]    M. Hoffman and D. M. Monroe, “Coagulation 2006: a modern viewof hemostasis. Hematology/Oncol,” Clin. North Am., vol. 21, pp. 1–11, 2007.

[35]    P. Bhattacharjee, H. Begam, A. Chanda, and S. K. Nandi, “Animal trial on zinc doped hydroxyapatite: A case study,” Journal of Asian Ceramic Societies, vol. 2, no. 1, pp. 44–51, 2014, doi: 10.1016/j.jascer.2014.01.005.

[36]    D. Acharjee, S. Debnath, P. Basak, S. Roy, and S. Kumar Nandi, “IN-VITRO CHARACTERISATION OF MAGNESIUM DOPED HYDROXYAPATITE DEVELOPED FROM CALCIUM HYDROXIDE AND WASTE EGGSHELL.”

[37]    K. I. Sokol and R. V Vovk, “Functional characteristics of hydroxyapatite sintered at high temperatures,” Vovk Journal of V. N. Karazìn Kharkiv National University. Series Physics. Iss, vol. 39, p. 2023, 2023, doi: 10.26565/2222-5617-2023-39.

Ahead of Print Subscription Original Research
Volume 14
03
Received 17/03/2026
Accepted 25/03/2026
Published 07/05/2026
Publication Time 51 Days
36

Login


My IP

PlumX Metrics