Development and Mechanical Characterization of Polymer based Bio Composite Filaments for FDM Applications

Notice

This is an unedited manuscript accepted for publication and provided as an Article in Press for early access at the author’s request. The article will undergo copyediting, typesetting, and galley proof review before final publication. Please be aware that errors may be identified during production that could affect the content. All legal disclaimers of the journal apply.

Year : 2026 | Volume : 14 | 02 | Page :
    By

    Sathish Kumar Adapa,

  • Kelli DurgaPrasad,

  • Suman Pandipati,

  • Muddada Venkatesh,

  • Venkata Maruti Prasad S,

  • Satya Prasad Maddula,

  • Rhoda Afriyie Mensah,

  1. Assistant Professor, Department of Mechanical Engineering, Aditya Institute of Technology and Management, Chakipalle, Andhra Pradesh, India
  2. Assistant Professor, Department of Mechanical Engineering, Aditya Institute of Technology and Management, Chakipalle, Andhra Pradesh, India
  3. Assistant Professor, Department of Mechanical Engineering, Aditya Institute of Technology and Management, Chakipalle, Andhra Pradesh, India
  4. Assistant Professor, Department of Mechanical Engineering, Aditya Institute of Technology and Management, Chakipalle, Andhra Pradesh, India
  5. Assistant Professor, Department of Chemistry, Aditya Institute of Technology and Management, Chakipalle, Andhra Pradesh, India
  6. Assistant Professor, Department of Aero Space Engineering, School of Technology, GITAM, Hyderabad, Telangana, India
  7. Assistant Professor, Department of Civil, Environmental and Natural Resources Engineering, Lulea University of Technology, Lulea, Sweden

Abstract

Additive Manufacturing (AM) is an advanced fabrication process capable of producing complex and intricate components to meet diverse industrial and customer demands. For small-scale producers and researchers, FDM is the most straightforward, affordable, and easily accessible of the several AM processes. The majority of conventional polymer feedstocks used in FDM lack sufficient mechanical strength and thermal stability, which limits their use in load-bearing or structural components. This effort aims to design and characterize a bio composite filament for the FDM method that is sustainable and based on polymers. An NaOH solution was used to chemically treat coir fibers in order to eliminate surface deposition. This surface enhancement was thought to have improved the fiber’s adherence to the matrix. To achieve uniform dispersion and high interfacial compatibility, treated fibers are next combined with PLA and a few additives via internal melt mixing. A controlled filament extrusion system was used to produce the filament, and FDM printing was used to create specimens for mechanical testing. The NaOH treatment successfully altered the coir fiber surface, enhancing mechanical interlocking and chemical bonding with the PLA matrix, according to mechanical characterization. The PLA-coir bio composite’s improvement in tensile strength from virgin PLA (60.55 MPa) to 67.14 MPa validates the treated natural fiber’s capacity to reinforce. On the other hand, because of the material’s intrinsic porosity and the local stress concentration brought on by the fibers in the printed structures, several of the compressive strength values showed a minor drop when compared to pristine PLA. Additionally, their surface smoothness and dimensional accuracy were adequate for FDM applications. As a result, the generated PLA-coir bio composite filaments are environmentally benign, biodegradable, and compatible with any standard FDM equipment without necessitating any changes to the FDM processing settings. These results highlight natural fiber-supported PLA as a practical, environmentally friendly substitute for synthetic polymer filaments, enabling small-scale vendors and researchers to produce lightweight, sustainable parts with thousands of times greater tensile performance and environmental impact.

 

Keywords: FDM, Coir Fiber, PLA, Filaments, Tensile properties, Compression properties.

How to cite this article:
Sathish Kumar Adapa, Kelli DurgaPrasad, Suman Pandipati, Muddada Venkatesh, Venkata Maruti Prasad S, Satya Prasad Maddula, Rhoda Afriyie Mensah. Development and Mechanical Characterization of Polymer based Bio Composite Filaments for FDM Applications. Journal of Polymer & Composites. 2026; 14(02):-.
How to cite this URL:
Sathish Kumar Adapa, Kelli DurgaPrasad, Suman Pandipati, Muddada Venkatesh, Venkata Maruti Prasad S, Satya Prasad Maddula, Rhoda Afriyie Mensah. Development and Mechanical Characterization of Polymer based Bio Composite Filaments for FDM Applications. Journal of Polymer & Composites. 2026; 14(02):-. Available from: https://journals.stmjournals.com/jopc/article=2026/view=239952


References

  1. Sathish Kumar Adapa, “Prospects of Natural Fiber-Reinforced Polymer Composites for Additive Manufacturing Applications: A Review,” JOM. 2023; 75: 920–940. doi: 10.1007/s11837-022-05670-w.
  2. Mou, J. Li, Y. Lu, G. Li, and J. Li, “Polylactic acid: A future universal biobased polymer with multifunctional performance from monomer synthesis, and processing to applications: A review,” J. Hazard. Mater. Adv. 2025; 18: 100757. doi: 10.1016/j.hazadv.2025.100757.
  3. Santulli, P. Sivasubramanian, M. Kalimuthu, “Pineapple Fibers, their composites and applications,” Plant Fibers, their Composites, and Applications, 2022, pp. 323-346.
  4. Ayrilmis, G. Kanat, A. Avsar, E. Yildiz, P. Sivasubramanian, “Utilizing Waste Manhole Covers and Fiberboard as Reinforcing Fillers for Thermoplastic Composites, J. reinforeced Plast. Compos., 2024; 44 (17–18): 1108–1118. doi:10.1177/07316844241238507.
  5. Liu, H. He, X. Peng, B. Huang, and J. Li, “Three-dimensional printing of poly (lactic acid) bio-based composites with sugarcane bagasse fiber: Effect of printing orientation on tensile performance,” Polym. Adv. Technol. 2019; 30(4): 910–922. doi: 10.1002/pat.4524.
  6. F. Pereira, A. C. Branco, R. Cláudio, A. C. Marques, and C. G. Figueiredo-Pina, “Development of Composites of PLA Filled with Different Amounts of Rice Husk Fibers for Fused Deposition Modeling,” J. Nat. Fibers. 2023; 20(1): 1-17. doi: 10.1080/15440478.2022.2162183.
  7. Depuydt et al., “Production and characterization of bamboo and flax fiber reinforced polylactic acid filaments for fused deposition modeling (FDM),” Polym. Compos. 2019; vol. 40(5): 1951–1963. doi: 10.1002/pc.24971.
  8. Xiao, V. S. Chevali, P. Song, D. He, and H. Wang, “Polylactide/hemp hurd bio composites as sustainable 3D printing feedstock,” Compos. Sci. Technol. 2019; 107887. doi: 10.1016/j.compscitech.2019.107887.
  9. Balaji, B. Arulmurugan, V. Bhuvaneswari, and M. Sathishkumar, “Comparative analysis of Polylactic Acid / Bamboo bio composites manufactured by Additive Manufacturing and Compression Moulding Methods,” J. Mater. Res. Technol. 2025; 36(4): 7035–7042. doi: 10.1016/j.jmrt.2025.04.332.
  10. Nonkrathok, T. Trongsatitkul, and N. Suppakarn, “Role of Maleic Anhydride-Grafted Poly (lactic acid) in Improving Shape Memory Properties of Thermo responsive Poly (ethylene glycol) and Poly (lactic acid) Blends,” Polymers (Basel). 2022; 14(18):1-15. doi: 10.3390/polym14183923.
  11. Karuppiah, K.C. Kuttalam, and M. Palaniappan, “Multi objective Optimization of Fabrication Parameters of Jute Fiber / Polyester Composites with Egg Shell Powder and Nanoclay Filler”, molecules, 2020; 25: 1–11. doi: 10.3390/molecules25235579.
  12. Sivasubramanian, K. Mayandi, S. Carlo, P. Murugesan, N. Rajini, and F. Cristiano, Tailoring Epoxy Composites with Acacia Caesia Bark Fibers: Evaluating the Effects of Fiber Amount and Length on Material Characteristics, Fibers, 2023; 11(63): 1–17. doi: 10.3390/ f ib11070063.
  13. Chen, X. Wang, S. Gu, A. Huang, and H. Cheng, “Effects of alkali treatment on the bending and fracture behavior of biomaterial bamboo,” Polym. Test. 2024; 143(11): 108715. doi: 10.1016/j.polymertesting.2025.108715.
  14. D. B. Anteneh Geremew, Pieter De Winne, Tamene Adugna Demissie, “Surface modification of bamboo fibers through alkaline treatment: Morphological and physical characterization for composite reinforcement,” J. Eng. Fiber. Fabr. 2024; 19: 1–13. doi: 10.1177/15589250241248764.
  15. Mohammed, R. Zulkifli, M. Faizal, M. Tahir, and T. Sumer, “Results in Engineering A study of mechanical properties and performance of bamboo fiber / polymer composites,” Results Eng. 2024; 23(6): 102396. doi: 10.1016/j.rineng.2024.102396.
  16. Aruchamy, M. Karuppusamy, and S. Krishnakumar, Enhancement of Mechanical Properties of Hybrid Polymer Composites Using Palmyra Palm and Coconut Sheath Fibers: The Role of Tamarind Shell Powder, Bioresources, 2024; 20(1): 698–724. doi: 10.15376/biores.20.1.698-724.
  17. Somsuk and S. Pramoonmak, “Enhancing Mechanical Properties of 3D-Printed PLA Composites Reinforced with Natural Fibers: A Comparative Study,” J. Compos. Sci. 2025; 9: 180.
  18. Ramasubbu, A. Kayambu, and S. Palanisamy, Mechanical Properties of Epoxy Composites Reinforced with Areca Catechu Fibers Containing Silicon Carbide, BioResour., 2024; 19(2): 2353–2370. doi: 10.15376/biores.19.2.2353-2370.
Ahead of Print Subscription Original Research
Volume 14
02
Received 15/10/2025
Accepted 13/11/2025
Published 10/04/2026
Publication Time 177 Days
37

Login


My IP

PlumX Metrics