Study of Modification of Butadiene-Styrene Rubber with Biopolymer

Year : 2025 | Volume : 14 | Issue : 01 | Page : 299 310
    By

    Shixaliyev Kerem Sefi,

  • Movlayev Ibrahim Humbat,

  • Aysun Rzazadə Mubariz,

  1. Professor, Department of Organic Substances and Technology of Macromolecular Compounds, Azerbaijan State Oil and Industry University, Baku, Azerbaijan
  2. Assistant Professor, Department of Organic Substances and Technology of Macromolecular Compounds, Azerbaijan State Oil and Industry University, Baku, Azerbaijan
  3. Student, Department of Organic Substances and Technology of Macromolecular Compounds, Azerbaijan State Oil and Industry University, Baku, India

Abstract

This paper presents a detailed study aimed at the development of a new composite system based on butadiene-styrene rubber (BSR) and natural biopolymer wooden stone. The main goal of the work was the creation of a thermodynamically compatible material with improved ozone-resistant and physical-mechanical properties, able to function effectively in aggressive conditions, especially in the liberated areas of the Republic of Azerbaijan, where the requirements for the stability of materials in extreme climatic conditions are relevant. To achieve the goal, theoretical and experimental studies aimed at studying the interaction of components in the composition of the new composition were conducted. For the first time, ecologically clean natural biopolymer wooden stone was used as a modifier, which allowed the reduction of the level of use of synthetic additives and increased the environmental safety of the finished product. Recipes were developed, including from 4 to 8 mass parts of biopolymer, which ensured the production of materials with high strength characteristics. The work has a high degree of novelty, practical significance and relevance, since it is aimed at creating modern, environmentally friendly and technologically efficient solutions based on a combination of industrial and natural raw materials.

Keywords: Binary system, biopolymer, melt flow index of the composition, modifications, vulcanization

[This article belongs to Journal of Polymer & Composites ]

aWQ6MjI3MTE1fGZpbGVuYW1lOjU5NjQ4NDY3LWZpLmF2aWZ8c2l6ZTp0aHVtYm5haWw=
How to cite this article:
Shixaliyev Kerem Sefi, Movlayev Ibrahim Humbat, Aysun Rzazadə Mubariz. Study of Modification of Butadiene-Styrene Rubber with Biopolymer. Journal of Polymer & Composites. 2025; 14(01):299-310.
How to cite this URL:
Shixaliyev Kerem Sefi, Movlayev Ibrahim Humbat, Aysun Rzazadə Mubariz. Study of Modification of Butadiene-Styrene Rubber with Biopolymer. Journal of Polymer & Composites. 2025; 14(01):299-310. Available from: https://journals.stmjournals.com/jopc/article=2025/view=227133


Browse Figures

References

  1. Shikhaliev K. Technology of manufacturing a nuclear magnetic resonance probe NMR. In: Shikhaliev K, editor. International Scientific Journal United-Journal. 1st edition. Tallinn, Estonia: United-Journal Publishing; 2018. pp. 36–38.
  2. Shykhaliev K. Modification of bitumen with plastic and rubber waste. In: Shykhaliev K, editor. World Science Warsaw Poland 2018. 1st edition. Warsaw, Poland: World Science Publishing; 2018. p. 29.
  3. Shikhaliev KS, Salimov VH. Method of Group Decision Making for Production Planning of the Oil Refinery Plant. In: Salimov VH, editor. IJCGM. 1st edition. Baku, Azerbaijan: IJCGM Publishing; 2023. pp. 1–5.
  4. Aydan A. SKN-40 rubber with the participation of simple and complex eternals purchase of chemically resistant rubbers. In: Aydan A, editor. International Journal of Engineering Technology Research & Management. 1st edition. Baku, Azerbaijan: IJETRM; 2022. pp. 54–63.
  5. Amirov F, Shikhaliev K. Properties of Linear Low-Density Polyethylene. In: Amirov F, editor. International Journal of Innovative Technology and Exploring Engineering (IJITEE). 1st edition. Baku, Azerbaijan: Blue Eyes Intelligence Engineering; 2020. pp. 348–352.
  6. Khan AU, Khan M, Khan AA, Parveen A, Ansari S, Alam M. Effect of Phyto-Assisted Synthesis of Magnesium Oxide Nanoparticles (MgO-NPs) on Bacteria and the Root-Knot Nematode. In: Khan AU, editor. Phyto-Assisted Synthesis of Nanoparticles. 1st edition. London, UK: Academic Press; 2022. p. 3973841.
  7. Lima CMG, Emran TB, Alhumaydhi F, Ashtekar H, Sandeep DS, Conte-Junior CA. Development of Microneedle Patch Loaded with Bacopa monnieri Solid Lipid Nanoparticles for Parkinson’s Disease. In: Lima CMG, editor. Management of Parkinson’s Disease. 1st edition. New York, USA: Springer; 2022. p. 9150205.
  8. Shikhaliev KS. Method of Group Decision Making for Production Planning of the Oil Refinery Plant. In: Shikhaliev KS, editor. Indian Journal of Computer Graphics and Multimedia (LJCGM). 1st edition. New Delhi, India: IJCGM; 2021. pp. 1–5.
  9. Shikhaliev KS. Investigation of the Properties of Compositions Based on Modified Polymer Mixtures. In: Shikhaliev KS, editor. International Journal of Engineering and Advanced Technology (IJEAT). 1st edition. Bhopal, India: IJEAT; 2022. pp. 119–129.
  10. Shikhaliev KS. Modification of the used-up polymeric materials and investigation of properties of the materials obtained. In: Shikhaliev KS, editor. Journal of Medical Pharmaceutical and Allied Sciences. 1st edition. Nagpur, India: JMPAS; 2022. pp. 4697–4702.
  11. Shikhaliev KS. Investigation of the Use of Waste (Limestones) in the Polymer-Bitumen Composition. In: Shikhaliev KS, editor. Science, Innovations, and Education: Problems and Prospects. 1st edition. Tokyo, Japan: CPN Publishing Group; 2022. pp. 120–130.
  12. Al-Mosawi AI, Hashim AA, Al-Maamori MH. Production of High-Performance Mountings using Rubber-Polymer Waste. In: Al-Mosawi AI, editor. OALib. 1st edition. Baghdad, Iraq: OALib; 2019. p. 16.
  13. Naidu AL, Duppala AK. A study on different chemical treatments for natural fiber reinforced composites. In: Naidu AL, editor. International Journal of Mechanical and Production Engineering Research and Development. 1st edition. Chennai, India: IJMPERD; 2018. pp. 143–152.
  14. Belov NA, Safronov AP, Yampolskiy YP. Visokomolyekulyarniye soedineniya. In: Belov NA, editor. Seriya A. 1st edition. Moscow, Russia: Nauka; 2012. p. 1631.
  15. Bundjali B, Yudistira I, Jariah B, Sukria L. Polymer Journal. In: Bundjali B, editor. Polymer Journal Volume 39. 1st edition. Tokyo, Japan: SPSJ; 2007. p. 1337.
  16. Yermilova YA, Sizova AA, Ilicheva NN, Pleshakov DV. Uspekhi khimii i khimicheskoy tekhnologii. In: Yermilova YA, editor. Chemical Technology Success. 1st edition. Moscow, Russia: MUCTR; 2014. p. 65.
  17. Shikhaliev K. Investigation of the subsequent use of lands along the Araz River contaminated with heavy metals. In: Shikhaliev K, editor. Journal of Aeronautical Materials. 1st edition. Beijing, China: JAM; 2023. pp. 102–111.
  18. Shikhaliyen K. Study of the properties of the composition obtained based on mixtures of polyvinyl chloride and ethylene-propylene copolymers. In: Shikhaliyen K, editor. Journal of Aeronautical Materials. 1st edition. Beijing, China: JAM; 2023. pp. 112–118.
  19. Shikhaliev K. Generalization of the temperature dependence of some physical properties of high-strength polyethylene using the method of given parameters. In: Shikhaliev K, editor. Journal of Harbin Engineering University. 1st edition. Harbin, China: JHEU; 2024. pp. 431–438.
  20. Shikhaliev K. Discontinued High-density and Low-density polyethylene purchase of environmentally friendly road surfaces. In: Shikhaliev K, editor. Road Materials. 1st edition. Baku, Azerbaijan: ASOIU; 2024. pp. 422–430.
  21. Shikhaliev K. Polymers are functionalized by wood resin and oil-gasoline-resistant rubber. In: Bylyev A, editor. Structure and Dynamics of Molecular Systems. 1st edition. Ufa, Russia: IPMK UC RAS; 2006. pp. 155–159.
  22. Bylyev A. Structure and dynamics of molecular systems. In: Bylyev A, editor. Molecular Systems. 1st edition. Ufa, Russia: IPMK UC RAS; 2006. pp. 155–159.
  23. Vagizova RR, Khakimullin YN, Stepanov PA, Panyutich FM. Properties and possibilities of using rubbers based on the radiation destructor butyl rubber. In: Vagizova RR, editor. Rubber and Rubber. 1st edition. Kazan, Russia: KRT; 2006. pp. 38–41.
  24. Vagizova RR, Khakimullin YN, Stepanov NA, Palyutin FM. Some features of vulcanization of radiation regenerated butyl rubber. In: Vagizova RR, editor. Bulletin of the Kazan Technological University. 1st edition. Kazan, Russia: KSTU; 2006. pp. 144–147.
  25. Vagizova RR, Khakimullin GV, Makarov GV, Wolfson SI, Stepanov PA. Thermal stability of radiation butyl regenerate. In: Vagizova RR, editor. Rubber and Rubber. 1st edition. Moscow, Russia: Rubber; 2007. pp. 9–11.
  26. Vagizova RR, Khakimullin YN, Stepanov PA. Effect of the composition of rubbers based on radiation regenerate of butyl rubber on the properties. In: Vagizova RR, editor. Collection of Scientific Papers of Young Scientists and Specialists. 1st edition. Cheboksary, Russia: Chuvash University; 2006. pp. 185–190.
  27. Vagizova RR, Khakimullin YN, Stepanov A. Possibilities of using radiation reclaimed butyl rubber in roofing and waterproofing materials. In: Vagizova RR, editor. Construction Materials. 1st edition. Moscow, Russia: CM; 2007. pp. 2–4.
  28. Vagizova RR. Influence of the nature of cross-linking on the radiation destruction of butyl rubber vulcanizates. In: Vagizova RR, editor. Proceedings of the XIII International Conference of Students Lomonosov. 1st edition. Moscow, Russia: Moscow State University; 2006. pp. 406–407.
  29. Saburov VY, Vagizova RR, Stepanov PA, Khakimullin YN. Radiation devulcanizate R-5 as a full-fledged substitute for butyl rubber in compositions. In: Saburov VY, editor. Proceedings of the XI All-Russian Scientific and Practical Conference. 1st edition. Moscow, Russia: Rubber Industry; 2005. p. 213.
  30. Vagizova RR, Stepanov PA, Khakimullin YN. Radiation destruction of rubbers based on radiation reclaimed butyl rubber. In: Vagizova RR, editor. Proceedings of the III All-Russian Scientific Conference Physicochemistry of Polymer Processing. 1st edition. Ivanovo, Russia: IHTU; 2006. p. 92.
  31. Vagizova RR, Khakimullin YN. Features of obtaining radiation reclaimed butyl rubber under radiation. In: Vagizova RR, editor. Abstracts of the IV All-Russian Karginsky Conference. 1st edition. Moscow, Russia: Polymer Science; 2007. p. 11.
  32. Karagöz İ. Production and characterization of sustainable biocompatible PLA/walnut shell composite materials. In: Karagöz İ, editor. Polymer Bulletin. 1st edition. Istanbul, Turkey: Springer; 2024. pp. 1–21.
  33. Karagöz İ, Büyükkaya K, Demirer H, Mudu M, Kartal İ. Mechanical and thermal characterization of elastomer modified polypropylene hybrid composites. In: Karagöz İ, editor. J Appl Polym Sci. 1st edition. Istanbul, Turkey: Wiley; 2024. p. e55710.
  34. Karagöz İ, Mutlu D, Çavuşoğlu A, Çelebi M, Ceylan Ö. Small rates of walnut shell and talc fillers on epoxy hybrid composites. In: Karagöz İ, editor. Biomass Conversion and Biorefinery. 1st edition. Istanbul, Turkey: Springer; 2024. pp. 1–12.
  35. Shikhaliev KS. Final study on biopolymer modification. In: Shikhaliev KS, editor. Polymer Engineering. 1st edition. Baku, Azerbaijan: ASOIU; 2025. pp. 45–55.
Regular Issue Subscription Original Research
Volume 14
Issue 01
Received 18/08/2025
Accepted 03/09/2025
Published 15/09/2025
Publication Time 28 Days
273

Login


My IP

PlumX Metrics