Structures and sensors of Polymer Optical Fibers for Last Mile Networks

Notice

This is an unedited manuscript accepted for publication and provided as an Article in Press for early access at the author’s request. The article will undergo copyediting, typesetting, and galley proof review before final publication. Please be aware that errors may be identified during production that could affect the content. All legal disclaimers of the journal apply.

Year : 2024 | Volume : | : | Page : –
By
vector

Ankur Singhal,

vector

Vinay Bhatia,

vector

Tarun Singhal,

vector

Promila Singhal,

vector

Ishta Rani,

vector

Himanshu Sharma,

vector

Anil Garg,

  1. Professor, CEC-CGC, Landran,Mohali,Chandigarh, Punjab, India
  2. Professor, CEC-CGC, Landran,Mohali,Chandigarh, Punjab, India
  3. AssociateProfessor, ECE Department, CEC-CGC, Landran,Mohali,Chandigarh, Punjab, India
  4. Research Scholar, GGGI, Shahabad,Ambala, Haryana, India
  5. Assistant Professor, CSE Department, CU, Mohali,Chandigarh, Punjab, India
  6. Associate Professor, ECE Department, JBIET, Hyderabad, Telangana, India
  7. Associate Professor, ECE Department, MMEC, MMDU, Mullana, Ambala, Haryana, India

Abstract document.addEventListener(‘DOMContentLoaded’,function(){frmFrontForm.scrollToID(‘frm_container_abs_123297’);});Edit Abstract & Keyword

Originating from distinct concepts for transferring information, sensing, or lighting efficiency, fiber characteristics vary greatly throughout their range. A substantial bandwidth-length product with acceptable attenuation characteristics is required for effective transfer of information. Since sensor fibers are typically used over short distances having considerably lower attenuation prerequisites. This paper presents polymer optical fiber (POFs) structures that are used as sensors over conventional fiber optics.An even broader spectrum of optical characteristics can be obtained by fabricating these fibers using polymer components rather than silica.A thick polymer fiber, as opposed to a glass optical fiber, will maintain its physical adaptability that is along with its large core, makes connecting the fibers during installation simple and reasonably priced. Diverse types of POF sensors are presented in this article with their possible application areas. POF is one of the technologies that could serve as the core of the crucial last mile of the telecom networks also known as access network, which offers a fiber-optic substitute for copper that, is simple to set up and has an excellent bandwidth. Further, optical access system is investigated for high transmission rate and longer span and results are shared. Large numbers of subscribers share the communication facilities in the which allows supervisors to amortize deployment and operating costs much more financially.

Keywords: Polymer Optical Fiber, POF Structures, POF Sensors, Optical access networks, Attenuation.

aWQ6MTg3NzEwfGZpbGVuYW1lOjRjMGFkZGE4LWZpLXBuZy53ZWJwfHNpemU6dGh1bWJuYWls
How to cite this article:
Ankur Singhal, Vinay Bhatia, Tarun Singhal, Promila Singhal, Ishta Rani, Himanshu Sharma, Anil Garg. Structures and sensors of Polymer Optical Fibers for Last Mile Networks. Journal of Polymer and Composites. 2024; ():-.
How to cite this URL:
Ankur Singhal, Vinay Bhatia, Tarun Singhal, Promila Singhal, Ishta Rani, Himanshu Sharma, Anil Garg. Structures and sensors of Polymer Optical Fibers for Last Mile Networks. Journal of Polymer and Composites. 2024; ():-. Available from: https://journals.stmjournals.com/jopc/article=2024/view=0

Full Text PDF

Full Text PDF

References
document.addEventListener(‘DOMContentLoaded’,function(){frmFrontForm.scrollToID(‘frm_container_ref_123297’);});Edit

1.H. Kubota, K. Suzuki, S. Kawanishi, M. Kakazawa, M. Tanaka, M. Fujita, “Low-loss, 2 km-long photonic crystal fibre with zero GVD in the near IR suitable for picosecond pulse propagation at the 800 nm band,” Postdeadline paper CPD3, Conference on Lasers and Electro-Optics CLEO 2001, (Optical Society of America, Washington, D.C., 2001).

  1. M.J. Steel and R.M. Osgood, “Elliptical-hole photonic crystal fibres,” Opt. Lett. 26, 229-231 (2001).
  2. T.A. Birks, J.C. Knight, and P. St. J. Russell, “Endlessly single-mode photonic crystal fibre,” Opt. Lett. 22, 961-963 (1997).

4 H. Kubota, K. Suzuki, S. Kawanishi, M. Kakazawa, M. Tanaka, M. Fujita, “Low-loss, 2 km-long photonic crystal fibre with zero GVD in the near IR suitable for picosecond pulse propagation at the 800 nm band,” Postdeadline paper CPD3, Conference on Lasers and Electro-Optics CLEO 2001, Baltimore, MD, USA.

  1. Shih, C., Kuo, C., & Chou, Y. Frame-based forward error correction using content dependent coding for video streaming applications (2016) Computer Networks. 105, pp. 89-98.
  2. Kaur, A., Kaur, B., & Singh, K. Design and performance analysis of bidirectional TWDM-PON employing QAM-OFDM for downstream and remodulation for upstream (2017) Optik-International Journal of Light and Electron Optics.134, pp. 287-294.
  3. V. Mishra, N. Singh, U. Tiwari, and P. Kapur, Fiber grating sensors in medicine:current and emerging applications, Sensors and Actuators A, 167, 279e290 (2011).
  4. C. Gouveia, J. Baptista, and P. Jorge, Refractometric optical fiber platforms for label free sensing, In S.W. Harun, editor: Current Developments in Optical Fiber Technology, InTech (2013).
  5. He, T., Meng, Y., Wang, L. et al.Optical skyrmions from metafibers with subwavelength features. Nat Commun15, 10141 (2024).
  6. Yi, S., Ding, H., Luo, S. et al.Research progress on aero-optical effects of hypersonic optical window with film cooling. Light Sci Appl13, 310 (2024).
Ahead of Print Subscription Review Article
Volume
Received 13/06/2024
Accepted 18/11/2024
Published 05/12/2024
156