Analysis and Design of Pre-Engineering Building Structure by Using Staad Pro Software

Year : 2024 | Volume : 14 | Issue : 03 | Page : 1 7
    By

    Krishanakant Hulsure,

  • Swapnil Zagade,

  • Shivam Jadhav,

  • Vinesh Thorat,

Abstract

The analysis and design of a Pre-Engineered Building (PEB) were conducted using STAAD Pro software, alongside manual calculations for accurate load estimation, to ensure the building’s compliance with relevant engineering standards and codes. The evaluation took into account multiple load types, including dead loads, live (imposed) loads, wind loads, and relevant load combinations to replicate actual conditions the structure might face during its lifespan. This comprehensive approach provided a deep understanding of the essential design principles, construction procedures, and safety requirements for the structural components of a PEB. Key structural elements such as columns, beams, roof trusses, purlins, and connections were analyzed to ensure their strength, stability, and resilience under various load scenarios. The analysis also focused on optimizing material use to increase cost-efficiency and reduce construction time, which are major advantages of pre-engineered buildings. By utilizing STAAD Pro’s advanced analysis capabilities, the design process became more streamlined, offering precise calculations and better handling of complex load combinations and distribution, particularly for wind and seismic loads. Pre-engineered buildings are known for their cost-effectiveness, quick construction, and adaptability, making them increasingly popular for various industrial, commercial, and institutional uses. The design ensured the building adhered to safety, durability, and stability requirements while meeting the project’s budgetary and time constraints. Overall, the use of STAAD Pro helped produce an efficient structural design that balances performance with economy, providing a reliable and sustainable solution for modern construction needs.

Keywords: STAAD Pro, tapered section, load combination, analysis

[This article belongs to Recent Trends in Civil Engineering & Technology ]

How to cite this article:
Krishanakant Hulsure, Swapnil Zagade, Shivam Jadhav, Vinesh Thorat. Analysis and Design of Pre-Engineering Building Structure by Using Staad Pro Software. Recent Trends in Civil Engineering & Technology. 2024; 14(03):1-7.
How to cite this URL:
Krishanakant Hulsure, Swapnil Zagade, Shivam Jadhav, Vinesh Thorat. Analysis and Design of Pre-Engineering Building Structure by Using Staad Pro Software. Recent Trends in Civil Engineering & Technology. 2024; 14(03):1-7. Available from: https://journals.stmjournals.com/rtcet/article=2024/view=185329


References

  1. Jinsha M. S. and Linda Ann Mathew, (2016) “Analysis of Pre –Engineered Buildings” International Journal of Science and Research (IJSR). ISSN: 2319-7064.
  2. Shubham Shrivastava and Gaurav Shrivastava, (2022) “Pre-Engineered Structure study” International Research Journal of Engineering and Technology (IRJET). ISSN: 2395-0056 Vol. 09 Issue 12.
  3. Jaya Tamrakar and Dr. Anil Kumar Saxena (2022) “Study, Design and Analysis of Pre-Engineered Building with Different Parameter using STAAD Pro Software. International Research Journal of Modernization in Engineering Technology and Science ISSN: 2582-5208 Vol. 04 Issue 08.
  4. M. Meera (2013) “Pre-Engineered Building Design of an Industrial Warehouse” International Journal of Engineering Science and Emerging Technologies (IJESET). ISSN: 2231-6604 Vol. 5 Issue 2.
  5. Omkareshwar Prabhakar Tekale and Dr. Swati Ambadkar (2024) “Analysis and Design of Pre-Engineered and Conventional Industrial Building” International Journal of Progressive Research in Engineering Management and Science (IJPREMS). ISSN: 2583-1062 Vol. 04 Issue 06.
  6. Abinav (2024) “P. E. B. Framed Structure Design and Analysis using STAAD Pro” International Research Journal of Engineering and Technology (IRJET). ISSN: 2395-0056 Vol. 11 Issue 01.
  7. Syed Firoz, Sarath Chandra Kumar B and S. Kanakambara Rao (2012) “Design Concept of Pre-Engineered Building” International Journal of Engineering Research and Applications (IJERA). ISSN: 2248-9622 Vol. 2 Issue 2.
  8. Prakhar Pandey and Dr. Rakesh Kumar Pandey (2024) “STAAD Pro for Seismic Analysis and Design of Multistorey Structures” International Journal of Engineering Applied Science and Management ISSN: 2582-6948 Vol. 5 Issue 5.
  9. Neeraj Kumar and Dr. K. S. Grover (2022) “A Comparative Study of Conventional Steel Building and Pre-Engineered Building Structure using STAAD Pro” International Journal for Research in Applied Science and Engineering Technology (IJRASET) ISSN: 2321-9653 Vol. 6 Issue 6.
  10. Pornima Pritish Naik and Dr. S. H. Mahure (2021) “Comparative Study of Pre-Engineered Building and Conventional Steel Building” International Research Journal of Engineering and Technology (IRJET) ISSN: 2395-0072 Vol. 08 Issue 05
  11. D. Gawade and U. P. Waghe “Study of Pre-Engineered Building Concept, International of Research in Engineering and Applied Sciences.
  12. Aakash Varma, and Dr. Rajeev Chandak (2022) “Analaysis and Design of Pre-Engineered Building with different parameters” International Journal for Research in Applied Science and Engineerng Technology (IJRASET) ISSN: 2321-9653 Vol. 10 Issue 3.
  13. Snehal Dhande, Shubham Lawande, Shubham Malve and Sailee Landge (2024) “Analaysis and Design of Pre-Engineered Bulding using STAAD Pro V8I” International Journal of Progressive Research in Engineering Management and Science (IJPREMS) ISSN: 2583-1062 Vol.04 Issue 06.
  14. Abhijeet Shinde, Dr. Nitin S. Naik and Lalit N. Chaudhari (2023) “Analysis and Design of Pre-Engineered Building using Indian and Equivalent American code” International Research Journal of Engineering and Technology (IRJET) ISSN: 2395-0056 Vol. 10 Issue 03.
  15. Kalesha Shaik, B. S. S. Ratnamala Reddy and Durga Chaitanya Kumar Jagarapu (2020) “An Analytical study on Pre-Engineered Buildings using STAAD Pro”
  16. Subodh S. Patil, Raviraj V. Jadhav, Pritam A. Mali, Mahesh M. Bhanuse and Murgesh R. Katti (2017) “Analysis and Design of Pre-Engineered Building of an Industrial Warehouse’’ International Journal of Current Engineering and Science Research (IJCESR) ISSN: 2393-8374 Vol. 4 Issue 12.
  17. Durga Rama Naidu, K. Srinivasa Vengala Rao, V. Divya Sri, M. Navakanth and G. V. Rama Rao (2014) “Comparative study of Analysis and Design of Pre-Engineered Building and Conventional Frames” International Journal of Engineering Research and Development ISSN: 2278-067X Vol. 10 Issue 9.
  18. Humanaaz Arif Qureshi, Dr. Kuldeep R. Dabhekar, Amol Shahakar and Dr. Isha P. Khedikar (2020) “Comparative Analysis of Pre-Engineered and Conventional Steel Building” Journal of Emerging Technologies and Innovative Research (JETIR) ISSN: 2349-5162 Vol. 7 Issue 5.
Regular Issue Subscription Original Research
Volume 14
Issue 03
Received 14/10/2024
Accepted 18/10/2024
Published 21/10/2024
319

Login


My IP

PlumX Metrics