![](http://storage.googleapis.com/journals-stmjournals-com-wp-media-to-gcp-offload/2022/10/vector.jpg)
Priya Saxena,
![](http://storage.googleapis.com/journals-stmjournals-com-wp-media-to-gcp-offload/2022/10/vector.jpg)
Akash Vaghela,
- Associate Professor Department of Chemical Engineering, Parul Institute of Technology, Parul University, Vadodara, Gujarat India
- Research Scholar Department of Chemical Engineering, Parul Institute of Technology, Parul University, Vadodara, Gujarat India
Abstract
The current study uses the sol-gel approach to synthesize a new Dimensionally Stable Anode (DSA) covered with nanoparticles. The objective is to enhance the electrocatalytic activity and overall performance of the anodes in treating synthetic industrial wastewater containing reactive dyes. CuO and TiO2 nanoparticles are coated using a thermal decomposition technique on a titanium electrode. The DSA surface gains more surface area and better catalytic capabilities when nanoparticles are coated on it. By optimizing the electrochemical processes involved in effluent treatment, this novel approach seeks to improve the effectiveness and environmental friendliness of wastewater remediation in industrial settings. The nanomaterials coated DSA shows a notable improvement in the removal of reactive dye (methylene blue) from aqueous solutions. Absorbance was measured for untreated and treated samples withdrawn at periodic intervals of time at λmax 665 nm for methylene blue dye using UV-spectrophotometer. These absorbances were further used to estimate percentage color reduction which is 94 % after 105 minutes of electro-treatment. This innovative approach offers enhanced catalytic activity and stability, making it well-suited for efficient electrochemical treatment of diverse industrial effluents. By using cutting-edge oxidation methods, the coating’s incorporation of nanoparticles not only enhances the DSA’s overall performance but also helps remove impurities. Through the provision of a sustainable and affordable wastewater remediation solution, the technology investigated in this work has the potential to completely transform industrial effluent treatment processes, encouraging environmental stewardship and guaranteeing regulatory compliance.
Keywords: DSA, Electrochemical oxidation, Methylene blue, Sol-gel, COD, Methylene blue
[This article belongs to Emerging Trends in Chemical Engineering(etce)]
Browse Figures
References
- Khandare, R. V., & Govindwar, S. P. (2015). Phytoremediation of textile dyes and effluents: current scenario and future prospects. Biotechnology Advances, 33(8), 1697-1714.
- Santos, D. H., Duarte, J. L., Tavares, M. G., Tavares, M. G., Friedrich, L. C., Meili, L., & Zanta, C. L. (2020). Electrochemical degradation and toxicity evaluation of reactive dyes mixture and real textile effluent over DSA® electrodes. Chemical Engineering and Processing-Process Intensification, 153, 107940.
- Saxena, P., Ruparelia, J., & Saxena, P. (2022). Comparative study of 4-dimensional DSA on electrochemical treatability of a reactive dye. Materials Today: Proceedings, 57, 2457-2464.
- Gupta, V. K., Khamparia, S., Tyagi, I., Jaspal, D., & Malviya, A. (2015). Decolorization of mixture of dyes: A critical review. Global Journal of Environmental Science and Management, 1 (1), 71-94.
- Kariyajjanavar, P., Jogttappa, N., & Nayaka, Y. A. (2011). Studies on degradation of reactive textile dyes solution by electrochemical method. Journal of hazardous materials, 190 (1-3), 952-961.
- Dojčinović, B. P., Roglić, G. M., Obradović, B. M., Kuraica, M. M., Kostić, M. M., Nešić, J., & Manojlović, D. D. (2011). Decolorization of reactive textile dyes using water falling film dielectric barrier discharge. Journal of hazardous materials, 192(2), 763-771.
- Anbia, M., & Hariri, S. A. (2010). Removal of methylene blue from aqueous solution using nanoporous SBA-3. Desalination, 261(1-2), 61-66.
- Sanroman, M. A., Pazos, M., Ricart, M. T., & Cameselle, C. (2004). Electrochemical decolourisation of structurally different dyes. Chemosphere, 57(3), 233-239.
- Martínez-Huitle, C. A., & Brillas, E. (2009). Decontamination of wastewaters containing synthetic organic dyes by electrochemical methods: a general review. Applied Catalysis B: Environmental, 87(3-4), 105-145.
- Patel, P.S., Bandre, N. Saraf, A., Ruparelia, J.P. (2013). Electro-catalytic Materials (Electrode Materials) in Electrochemical Wastewater Treatment. Procedia Engineering, 51, 2013, 430 – 435.
- Sharma, A., Karn, R. K., & Pandiyan, S. K. (2014). Synthesis of TiO2 nanoparticles by sol-gel method and their characterization. J Basic Appl Eng Res, 1(9), 1-5.
- Mahshid, S., Askari, M., & Ghamsari, M. S. (2007). Synthesis of TiO2 nanoparticles by hydrolysis and peptization of titanium isopropoxide solution. Journal of materials processing technology, 189(1-3), 296-300.
- Comninellis, C., & Chen, G. (Eds.). (2010). Electrochemistry for the Environment(Vol. 2015, p. 859). New York: Springer.
- Brillas, E., & Martínez-Huitle, C. A. (2015). Decontamination of wastewaters containing synthetic organic dyes by electrochemical methods. An updated review. Applied Catalysis B: Environmental, 166, 603-643.
- Pandya, C. & Saxena, P. (2024). Reactive orange 16 dye removal using novel particle-coated and graphene oxide-based DSA, AIP Conf. Proc.3107, 030003.
- Saxena, P., & Ruparelia, J. (2019). Influence of supporting electrolytes on electrochemical treatability of Reactive Black 5 using dimensionally stable anode. Journal of The Institution of Engineers (India): Series A, Springer India,100 (2), 299-310
- Rajkumar, D., Kim, J. G., & Kim, K. K. (2004). A study on electrochemical oxidation of catechol in chloride medium for wastewater treatment application. Environmental Engineering Research, 9(6), 279-287.
![](http://storage.googleapis.com/journals-stmjournals-com-wp-media-to-gcp-offload/2022/10/101.jpg)
Emerging Trends in Chemical Engineering
Volume | 11 |
Issue | 02 |
Received | June 26, 2024 |
Accepted | July 9, 2024 |
Published | August 1, 2024 |