Comparative Energy and Exergy Performance of Box-Type Solar Cookers Using Various Pot Materials

[{“box”:0,”content”:”n[if 992 equals=”Open Access”]n

n

n

n

Open Access

nn

n

n[/if 992]n

n

Year : July 2, 2024 at 4:33 pm | [if 1553 equals=””] Volume :02 [else] Volume :02[/if 1553] | [if 424 equals=”Regular Issue”]Issue[/if 424][if 424 equals=”Special Issue”]Special Issue[/if 424] [if 424 equals=”Conference”][/if 424] : 01 | Page : 9-15

n

n

n

n

n

n

By

n

[foreach 286]n

n

n

Amit Tiwari, Harshita Swarnkar, Ritu Jain

n

    n t

  • n

n

n[/foreach]

n

n[if 2099 not_equal=”Yes”]n

    [foreach 286] [if 1175 not_equal=””]n t

  1. Assistant Professor, M.Tech Scholar, Assistant Professor Department of Mechanical Engineering, Suresh Gyan Vihar University, Jaipur, Department of Electrical Engineering, Suresh Gyan Vihar University, Jaipur, Department of Electrical Engineering, Suresh Gyan Vihar University, Jaipur Rajasthan, Rajasthan, Rajasthan India, India, India

    2. n[/if 1175][/foreach]

n[/if 2099][if 2099 equals=”Yes”][/if 2099]n

n

Abstract

nThis research presents a laboratory study of a box-type solar cooker for two types of pot materials. Under the climate conditions of Jaipur, experiments were carried out on a standard box-type solar cooker using steel and aluminum vessels, either with or without a load. It is estimated what the merit figure (F1 and F2) is. The obtained F1 values show that the cooker, when used with steel and aluminum containers, is of A quality. Energy and exertion analysis is the basis for performance evaluation. The solar-powered cooker with aluminum vessels has a greater energy and effectiveness than the solar oven with titanium dishes.

n

n

n

Keywords: Solar cookers, first figure of merit F1, second figure of merit F2, energy and exergy efficiency

n[if 424 equals=”Regular Issue”][This article belongs to International Journal of Machine Systems and Manufacturing Technology(ijmsmt)]

n

[/if 424][if 424 equals=”Special Issue”][This article belongs to Special Issue under section in International Journal of Machine Systems and Manufacturing Technology(ijmsmt)][/if 424][if 424 equals=”Conference”]This article belongs to Conference [/if 424]

n

n

n

How to cite this article: Amit Tiwari, Harshita Swarnkar, Ritu Jain. Comparative Energy and Exergy Performance of Box-Type Solar Cookers Using Various Pot Materials. International Journal of Machine Systems and Manufacturing Technology. July 2, 2024; 02(01):9-15.

n

How to cite this URL: Amit Tiwari, Harshita Swarnkar, Ritu Jain. Comparative Energy and Exergy Performance of Box-Type Solar Cookers Using Various Pot Materials. International Journal of Machine Systems and Manufacturing Technology. July 2, 2024; 02(01):9-15. Available from: https://journals.stmjournals.com/ijmsmt/article=July 2, 2024/view=0

nn[if 992 equals=”Open Access”] Full Text PDF Download[/if 992] n

n[if 992 not_equal=’Open Access’]
[/if 992]nn

nn[if 379 not_equal=””]n

Browse Figures

n

n

[foreach 379]n

n[/foreach]n

n

n

n[/if 379]n

n

References

n[if 1104 equals=””]n

  1. Apaolaza-Pagoaga, A. Carrillo-Andr´es, C.R. Ruivo, Experimental characterization of the thermal performance of the Haines 2 solar cooker, Energy 257 (2022), https://doi.org/10.1016/j.energy.2022.124730.
  2. Apaolaza-Pagoaga, A. Carrillo-Andr´es, C. Ruivo, Experimental thermal performance evaluation of different configurations of Copenhagen solar cooker, Renew. Energy 184 (2022) 604–618, https://doi.org/10.1016/j. renene.2021.11.105.
  3. Ruivo, A. Carrillo-Andr´es, X. Apaolaza-Pagoaga, Experimental determination of the standardised power of a solar funnel cooker for low sun elevations, Renew. Energy 170 (2021) 364–374, https://doi.org/10.1016/j.renene.2021.01.146.
  4. Apaolaza-Pagoaga, A. Carrillo-Andr´es, C. Ruivo, New approach for analysing the effect of minor and major solar cooker design changes: influence of height trivet on the power of a funnel cooker, Renew. Energy 179 (2021) 2071–2085, https://doi. org/10.1016/j.renene.2021.08.025.
  5. Carrillo-Andr´es, X. Apaolaza-Pagoaga, C. Rodrigues Ruivo, E. Rodríguez-García, F. Fern´andez-Hern´andez, Optical characterization of a funnel solar cooker with azimuthal sun tracking through ray-tracing simulation, Sol. Energy 233 (2022) 84–95, https://doi.org/10.1016/j.solener.2021.12.027.
  6. Kumar, A. Saxena, S.D. Pandey, A. Gupta, Cooking performance assessment of a phase change material integrated hot box cooker, Environ. Sci. Pollut. Res. (2023), https://doi.org/10.1007/s11356-023-25340-x.
  7. S. Ghosh, P.K. Biswas, S. Neogi, Thermal performance of solar cooker with special cover glass of low-e antimony doped indium oxide (IAO) coating, Appl. Therm. Eng. 113 (2017) 103–111, https://doi.org/10.1016/j. applthermaleng.2016.10.185.
  8. Harshita Swarnkar, Ritu Jain, Amit Tiwari, Role of Phase Change Materials in Solar Cooking for Thermal Energy Storage Applications: A Review, International Journal of Convergence of Technology and Management, Vol.10 Issue 1 Page No 05-18, ISSN: 2455-7528, https://www.gyanvihar.org/journals/wp-content/uploads/2024/Page_5_to_18.pdf
  9. K. Devan, Chidambaranathan Bibin, S. Gowtham, G. Hariharan, R. Hariharan, A comprehensive review on solar cooker with sun tracking system, Materials Today: Proceedings, Volume 33, Part 1, 2020, Pages 771-777, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2020.06.124.
  10. Harmim, M. Merzouk, M. Boukar, M. Amar, Solar cooking development in Algerian Sahara: Towards a socially suitable solar cooker, Renewable and Sustainable Energy Reviews, Volume 37, 2014, Pages 207-214, ISSN 1364-0321, https://doi.org/10.1016/j.rser.2014.05.028
  11. Harshita Swarnkar, Ritu Jain, Amit Tiwari, Himanshu Vasnani, Phase change material application in solar cooking for performance enhancement through storage of thermal energy: A future demand, World Journal of Advanced Engineering Technology and Sciences, 2024, 12(01), 306–330, https://doi.org/10.30574/wjaets.2024.12.1.0239
  12. Chang Zhou, Yinfeng Wang, Jing Li, Xiaoli Ma, Qiyuan Li, Moucun Yang, Xudong Zhao, Yuezhao Zhu, Simulation and economic analysis of an innovative indoor solar cooking system with energy storage, Solar Energy, Volume 263, 2023, 111816, ISSN 0038-092X, https://doi.org/10.1016/j.solener.2023.111816.
  13. Ramalingam Senthil, Enhancement of productivity of parabolic dish solar cooker using integrated phase change material, Materials Today: Proceedings, Volume 34, Part 2, 2021, Pages 386-388, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2020.02.197.
  14. Gawande, T.K., Ingole, D.S. Comparative study of heat storage and transfer system for solar cooking. SN Appl. Sci. 1, 1676 (2019). https://doi.org/10.1007/s42452-019-1753-0.
  15. Varun, U.C. Arunachala, P.K. Vijayan, Sustainable mechanism to popularise round the clock indoor solar cooking – Part I: Global status, Journal of Energy Storage, Volume 54, 2022, 105361, ISSN 2352-152X, https://doi.org/10.1016/j.est.2022.105361.

nn[/if 1104][if 1104 not_equal=””]n

    [foreach 1102]n t

  1. [if 1106 equals=””], [/if 1106][if 1106 not_equal=””],[/if 1106]

    2. n[/foreach]

n[/if 1104]

nn

nn[if 1114 equals=”Yes”]n

n[/if 1114]

n

n

[if 424 not_equal=””]Regular Issue[else]Published[/if 424] Subscription Original Research

n

n

[if 2146 equals=”Yes”][/if 2146][if 2146 not_equal=”Yes”][/if 2146]n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n[if 1748 not_equal=””]

[else]

[/if 1748]n

n

n

Volume 02
[if 424 equals=”Regular Issue”]Issue[/if 424][if 424 equals=”Special Issue”]Special Issue[/if 424] [if 424 equals=”Conference”][/if 424] 01
Received June 20, 2024
Accepted June 25, 2024
Published July 2, 2024

n

n

Views: 6

n

n

n

n function myFunction2() {n var x = document.getElementById(“browsefigure”);n if (x.style.display === “block”) {n x.style.display = “none”;n }n else { x.style.display = “Block”; }n }n document.querySelector(“.prevBtn”).addEventListener(“click”, () => {n changeSlides(-1);n });n document.querySelector(“.nextBtn”).addEventListener(“click”, () => {n changeSlides(1);n });n var slideIndex = 1;n showSlides(slideIndex);n function changeSlides(n) {n showSlides((slideIndex += n));n }n function currentSlide(n) {n showSlides((slideIndex = n));n }n function showSlides(n) {n var i;n var slides = document.getElementsByClassName(“Slide”);n var dots = document.getElementsByClassName(“Navdot”);n if (n > slides.length) { slideIndex = 1; }n if (n (item.style.display = “none”));n Array.from(dots).forEach(n item => (item.className = item.className.replace(” selected”, “”))n );n slides[slideIndex – 1].style.display = “block”;n dots[slideIndex – 1].className += ” selected”;n }nn”}]